qmk_firmware/keyboards/ergodone/readme.md

ErgoDone

ErgoDone is a modified ErgoDox with pre-soldered components made by K.T.E.C. It has different wiring and uses a Pro Micro instead of Teensy.

• Keyboard Maintainer: Yu He
• Hardware Supported:
  • ErgoDone ver. 1.3 (tested)
• Hardware Availability: KBDFans

Make example for this keyboard (after setting up your build environment):

make ergodone-default

See build environment setup then the make instructions for more information.

Flashing the keyboard

The ErgoDone uses an HID bootloader rather than the Teensy one, and requires a different way of flashing the firmware.

1. While plugging in the USB cable, hold the two right-most keys on the top row of the left half of the ErgoDone to enter FLASH mode and flash a hex file.

2. Use the hid_bootloader_cli utlity from TKG Toolkit:

    hid_bootloader_cli -mmcu=atmega32u4 ergodox_ergodone_default