35 lines
1.7 KiB
Markdown
35 lines
1.7 KiB
Markdown
GON NerD keyboard firmware
|
|
======================
|
|
|
|
## Changing Bootloader
|
|
|
|
It's not possible to simply flash this firmware on the GON NerD keyboard as the original bootloader does not support DFU connections.
|
|
|
|
It is possible to change the bootloader of the GON NerD with an ISP programmer. A guide on how to change the bootloader on your GON NerD can be found here:
|
|
[Converting NerD60 to TMK](https://deskthority.net/wiki/Converting_NerD60_to_TMK). After changing the bootloader you can flash your QMK keymap onto the keyboard.
|
|
|
|
_After changing the bootloader on your GON NerD PCB you will not be able to go back to the original firmware and the official configuration software will
|
|
not work anymore. You will lose your warranty and official support from GON!_
|
|
|
|
## Building
|
|
|
|
Download or clone the whole firmware and navigate to the keyboards/gonnerd folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
|
|
|
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
|
|
|
### Default
|
|
|
|
To build with the default keymap, simply run `make default`.
|
|
|
|
### Other Keymaps
|
|
|
|
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
|
|
|
|
To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
|
|
|
|
```
|
|
$ make [default|jack|<name>]
|
|
```
|
|
|
|
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
|