localhots/qmk_firmware
1
0
Fork 0
Code Releases Activity

The "Practice60" Board, Blue Pill powered (#4407)

Browse Source 
* Starting point for blue pill based practice60

* Changes

* add

* try raw bin no botloader

* swap back to bootloader version

* edit

* Remove debug LED flash

* Disable JTAG to open up B3 and B4

* Add led backlight support (no breathing yet)

* Update matrix for correctness

* RGB Underglow working in a very simple state

* not as bright

* Move to handwired

* revert ChibiOS_Test changes

* Changes based on PR comments

* Address PR comments v2

* Move files
This commit is contained in:
Andrew Kannan 2018-11-12 19:31:22 -05:00 committed by Drashna Jaelre
parent 599b21b9f4
commit e653cc198e
20 changed files with 2068 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

56
keyboards/handwired/practice60/boards/GENERIC_STM32_F103/board.c Normal file
View File

@ -0,0 +1,56 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#include "hal.h"
// Value to place in RTC backup register 10 for persistent bootloader mode
#define RTC_BOOTLOADER_FLAG 0x424C
/**
* @brief PAL setup.
* @details Digital I/O ports static configuration as defined in @p board.h.
* This variable is used by the HAL when initializing the PAL driver.
*/
#if HAL_USE_PAL || defined(__DOXYGEN__)
const PALConfig pal_default_config =
{
{VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
{VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
{VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
{VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
{VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
};
#endif
/*
* Early initialization code.
* This initialization must be performed just after stack setup and before
* any other initialization.
*/
void __early_init(void) {
stm32_clock_init();
}
/*
* Board-specific initialization code.
*/
void boardInit(void) {
//JTAG-DP Disabled and SW-DP Enabled
AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE;
//Set backup register DR10 to enter bootloader on reset
BKP->DR10 = RTC_BOOTLOADER_FLAG;
}

166
keyboards/handwired/practice60/boards/GENERIC_STM32_F103/board.h Normal file
View File

@ -0,0 +1,166 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _BOARD_H_
#define _BOARD_H_
/*
* Setup for a Generic STM32F103 board.
*/
/*
* Board identifier.
*/
#define BOARD_GENERIC_STM32_F103
#define BOARD_NAME "Generic STM32F103x board"
/*
* Board frequencies.
*/
#define STM32_LSECLK 32768
#define STM32_HSECLK 8000000
/*
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
*/
#define STM32F103xB
/*
* IO pins assignments
*/
/* on-board */
#define GPIOA_LED 8
#define GPIOD_OSC_IN 0
#define GPIOD_OSC_OUT 1
/* In case your board has a "USB enable" hardware
controlled by a pin, define it here. (It could be just
a 1.5k resistor connected to D+ line.)
*/
/*
#define GPIOB_USB_DISC 10
*/
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
*
* The digits have the following meaning:
* 0 - Analog input.
* 1 - Push Pull output 10MHz.
* 2 - Push Pull output 2MHz.
* 3 - Push Pull output 50MHz.
* 4 - Digital input.
* 5 - Open Drain output 10MHz.
* 6 - Open Drain output 2MHz.
* 7 - Open Drain output 50MHz.
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
* 9 - Alternate Push Pull output 10MHz.
* A - Alternate Push Pull output 2MHz.
* B - Alternate Push Pull output 50MHz.
* C - Reserved.
* D - Alternate Open Drain output 10MHz.
* E - Alternate Open Drain output 2MHz.
* F - Alternate Open Drain output 50MHz.
* Please refer to the STM32 Reference Manual for details.
*/
/*
* Port A setup.
* Everything input with pull-up except:
* PA2 - Alternate output (USART2 TX).
* PA3 - Normal input (USART2 RX).
* PA9 - Alternate output (USART1 TX).
* PA10 - Normal input (USART1 RX).
*/
#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */
#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */
#define VAL_GPIOAODR 0xFFFFFFFF
/*
* Port B setup.
* Everything input with pull-up except:
* PB10 - Push Pull output (USB switch).
*/
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */
#define VAL_GPIOBODR 0xFFFFFFFF
/*
* Port C setup.
* Everything input with pull-up except:
* PC13 - Push Pull output (LED).
*/
#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */
#define VAL_GPIOCODR 0xFFFFFFFF
/*
* Port D setup.
* Everything input with pull-up except:
* PD0 - Normal input (XTAL).
* PD1 - Normal input (XTAL).
*/
#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
#define VAL_GPIODODR 0xFFFFFFFF
/*
* Port E setup.
* Everything input with pull-up except:
*/
#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
#define VAL_GPIOEODR 0xFFFFFFFF
/*
* USB bus activation macro, required by the USB driver.
*/
/* The point is that most of the generic STM32F103* boards
have a 1.5k resistor connected on one end to the D+ line
and on the other end to some pin. Or even a slightly more
complicated "USB enable" circuit, controlled by a pin.
That should go here.
However on some boards (e.g. one that I have), there's no
such hardware. In which case it's better to not do anything.
*/
/*
#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
*/
#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
/*
* USB bus de-activation macro, required by the USB driver.
*/
/*
#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
*/
#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* _BOARD_H_ */

5
keyboards/handwired/practice60/boards/GENERIC_STM32_F103/board.mk Normal file
View File

@ -0,0 +1,5 @@
# List of all the board related files.
BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c
# Required include directories
BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103

10
keyboards/handwired/practice60/bootloader_defs.h Normal file
View File

@ -0,0 +1,10 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here (page 175):
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
* This also requires a patch to chibios:
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
*/
// STM32F103* does NOT have an USB bootloader in ROM (only serial),
// so setting anything here does not make much sense
// #define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

524
keyboards/handwired/practice60/chconf.h Normal file
View File

@ -0,0 +1,524 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/chconf.h
* @brief Configuration file template.
* @details A copy of this file must be placed in each project directory, it
* contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
#ifndef CHCONF_H
#define CHCONF_H
#define _CHIBIOS_RT_CONF_
/*===========================================================================*/
/**
* @name System timers settings
* @{
*/
/*===========================================================================*/
/**
* @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
#define CH_CFG_ST_RESOLUTION 16
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
#define CH_CFG_ST_FREQUENCY 2000
/**
* @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number
* of ticks that is safe to specify in a timeout directive.
* The value one is not valid, timeouts are rounded up to
* this value.
*/
#define CH_CFG_ST_TIMEDELTA 2
/** @} */
/*===========================================================================*/
/**
* @name Kernel parameters and options
* @{
*/
/*===========================================================================*/
/**
* @brief Round robin interval.
* @details This constant is the number of system ticks allowed for the
* threads before preemption occurs. Setting this value to zero
* disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
* @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
/**
* @brief Managed RAM size.
* @details Size of the RAM area to be managed by the OS. If set to zero
* then the whole available RAM is used. The core memory is made
* available to the heap allocator and/or can be used directly through
* the simplified core memory allocator.
*
* @note In order to let the OS manage the whole RAM the linker script must
* provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
#define CH_CFG_MEMCORE_SIZE 0
/**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
* does not spawn the idle thread. The application @p main()
* function becomes the idle thread and must implement an
* infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
/* Use __WFI in the idle thread for waiting. Does lower the power
* consumption. */
#define CORTEX_ENABLE_WFI_IDLE TRUE
/** @} */
/*===========================================================================*/
/**
* @name Performance options
* @{
*/
/*===========================================================================*/
/**
* @brief OS optimization.
* @details If enabled then time efficient rather than space efficient code
* is used when two possible implementations exist.
*
* @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
#define CH_CFG_OPTIMIZE_SPEED TRUE
/** @} */
/*===========================================================================*/
/**
* @name Subsystem options
* @{
*/
/*===========================================================================*/
/**
* @brief Time Measurement APIs.
* @details If enabled then the time measurement APIs are included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_TM FALSE
/**
* @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_REGISTRY TRUE
/**
* @brief Threads synchronization APIs.
* @details If enabled then the @p chThdWait() function is included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_WAITEXIT TRUE
/**
* @brief Semaphores APIs.
* @details If enabled then the Semaphores APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_SEMAPHORES TRUE
/**
* @brief Semaphores queuing mode.
* @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special
* requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
/**
* @brief Mutexes APIs.
* @details If enabled then the mutexes APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MUTEXES TRUE
/**
* @brief Enables recursive behavior on mutexes.
* @note Recursive mutexes are heavier and have an increased
* memory footprint.
*
* @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
/**
* @brief Conditional Variables APIs.
* @details If enabled then the conditional variables APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
#define CH_CFG_USE_CONDVARS TRUE
/**
* @brief Conditional Variables APIs with timeout.
* @details If enabled then the conditional variables APIs with timeout
* specification are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
/**
* @brief Events Flags APIs.
* @details If enabled then the event flags APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_EVENTS TRUE
/**
* @brief Events Flags APIs with timeout.
* @details If enabled then the events APIs with timeout specification
* are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
/**
* @brief Synchronous Messages APIs.
* @details If enabled then the synchronous messages APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MESSAGES TRUE
/**
* @brief Synchronous Messages queuing mode.
* @details If enabled then messages are served by priority rather than in
* FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special
* requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
/**
* @brief Mailboxes APIs.
* @details If enabled then the asynchronous messages (mailboxes) APIs are
* included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_MAILBOXES TRUE
/**
* @brief Core Memory Manager APIs.
* @details If enabled then the core memory manager APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MEMCORE TRUE
/**
* @brief Heap Allocator APIs.
* @details If enabled then the memory heap allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
* @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
#define CH_CFG_USE_HEAP TRUE
/**
* @brief Memory Pools Allocator APIs.
* @details If enabled then the memory pools allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MEMPOOLS FALSE
/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
#define CH_CFG_USE_DYNAMIC FALSE
/** @} */
/*===========================================================================*/
/**
* @name Debug options
* @{
*/
/*===========================================================================*/
/**
* @brief Debug option, kernel statistics.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_STATISTICS FALSE
/**
* @brief Debug option, system state check.
* @details If enabled the correct call protocol for system APIs is checked
* at runtime.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
/**
* @brief Debug option, parameters checks.
* @details If enabled then the checks on the API functions input
* parameters are activated.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_ENABLE_CHECKS FALSE
/**
* @brief Debug option, consistency checks.
* @details If enabled then all the assertions in the kernel code are
* activated. This includes consistency checks inside the kernel,
* runtime anomalies and port-defined checks.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_ENABLE_ASSERTS FALSE
/**
* @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated.
*
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_BUFFER_SIZE 128
/**
* @brief Debug option, stack checks.
* @details If enabled then a runtime stack check is performed.
*
* @note The default is @p FALSE.
* @note The stack check is performed in a architecture/port dependent way.
* It may not be implemented or some ports.
* @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
#define CH_DBG_ENABLE_STACK_CHECK FALSE
/**
* @brief Debug option, stacks initialization.
* @details If enabled then the threads working area is filled with a byte
* value when a thread is created. This can be useful for the
* runtime measurement of the used stack.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_FILL_THREADS FALSE
/**
* @brief Debug option, threads profiling.
* @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
* @note The default is @p FALSE.
* @note This debug option is not currently compatible with the
* tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
/** @} */
/*===========================================================================*/
/**
* @name Kernel hooks
* @{
*/
/*===========================================================================*/
/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
#define CH_CFG_THREAD_EXTRA_FIELDS \
/* Add threads custom fields here.*/
/**
* @brief Threads initialization hook.
* @details User initialization code added to the @p chThdInit() API.
*
* @note It is invoked from within @p chThdInit() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \
}
/**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
}
/**
* @brief Context switch hook.
* @details This hook is invoked just before switching between threads.
*/
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* Context switch code here.*/ \
}
/**
* @brief ISR enter hook.
*/
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
/* IRQ prologue code here.*/ \
}
/**
* @brief ISR exit hook.
*/
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
/* IRQ epilogue code here.*/ \
}
/**
* @brief Idle thread enter hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
/* Idle-enter code here.*/ \
}
/**
* @brief Idle thread leave hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
/* Idle-leave code here.*/ \
}
/**
* @brief Idle Loop hook.
* @details This hook is continuously invoked by the idle thread loop.
*/
#define CH_CFG_IDLE_LOOP_HOOK() { \
/* Idle loop code here.*/ \
}
/**
* @brief System tick event hook.
* @details This hook is invoked in the system tick handler immediately
* after processing the virtual timers queue.
*/
#define CH_CFG_SYSTEM_TICK_HOOK() { \
/* System tick event code here.*/ \
}
/**
* @brief System halt hook.
* @details This hook is invoked in case to a system halting error before
* the system is halted.
*/
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
/* System halt code here.*/ \
}
/**
* @brief Trace hook.
* @details This hook is invoked each time a new record is written in the
* trace buffer.
*/
#define CH_CFG_TRACE_HOOK(tep) { \
/* Trace code here.*/ \
}
/** @} */
/*===========================================================================*/
/* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
#endif /* CHCONF_H */
/** @} */

74
keyboards/handwired/practice60/config.h Normal file
View File

@ -0,0 +1,74 @@
/*
Copyright 2015 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6464
#define DEVICE_VER 0x0001
/* in python2: list(u"whatever".encode('utf-16-le')) */
/* at most 32 characters or the ugly hack in usb_main.c borks */
#define MANUFACTURER QMK
#define PRODUCT Practice 60
#define DESCRIPTION Practice 60
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, A4, A3, A2, A1, A0, C15, C14 }
#define MATRIX_ROW_PINS { B3, B4, B5, B6, B7 }
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_LEVELS 1
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION

353
keyboards/handwired/practice60/halconf.h Normal file
View File

@ -0,0 +1,353 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/halconf.h
* @brief HAL configuration header.
* @details HAL configuration file, this file allows to enable or disable the
* various device drivers from your application. You may also use
* this file in order to override the device drivers default settings.
*
* @addtogroup HAL_CONF
* @{
*/
#ifndef _HALCONF_H_
#define _HALCONF_H_
#include "mcuconf.h"
/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
#define HAL_USE_PAL TRUE
#endif
/**
* @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
#define HAL_USE_ADC FALSE
#endif
/**
* @brief Enables the CAN subsystem.
*/
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
#define HAL_USE_CAN FALSE
#endif
/**
* @brief Enables the DAC subsystem.
*/
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
#define HAL_USE_DAC FALSE
#endif
/**
* @brief Enables the EXT subsystem.
*/
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
#define HAL_USE_EXT FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
#define HAL_USE_GPT FALSE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C FALSE
#endif
/**
* @brief Enables the I2S subsystem.
*/
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
#define HAL_USE_I2S FALSE
#endif
/**
* @brief Enables the ICU subsystem.
*/
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
#define HAL_USE_ICU FALSE
#endif
/**
* @brief Enables the MAC subsystem.
*/
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
#define HAL_USE_MAC FALSE
#endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
#define HAL_USE_MMC_SPI FALSE
#endif
/**
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM FALSE
#endif
/**
* @brief Enables the RTC subsystem.
*/
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
#define HAL_USE_RTC FALSE
#endif
/**
* @brief Enables the SDC subsystem.
*/
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
#define HAL_USE_SDC FALSE
#endif
/**
* @brief Enables the SERIAL subsystem.
*/
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL FALSE
#endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB FALSE
#endif
/**
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
#define HAL_USE_SPI TRUE
#endif
/**
* @brief Enables the UART subsystem.
*/
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
#define HAL_USE_UART FALSE
#endif
/**
* @brief Enables the USB subsystem.
*/
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
#define HAL_USE_USB TRUE
#endif
/**
* @brief Enables the WDG subsystem.
*/
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
#define HAL_USE_WDG FALSE
#endif
/*===========================================================================*/
/* ADC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
#define ADC_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define ADC_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* CAN driver related settings. */
/*===========================================================================*/
/**
* @brief Sleep mode related APIs inclusion switch.
*/
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
#define CAN_USE_SLEEP_MODE TRUE
#endif
/*===========================================================================*/
/* I2C driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the mutual exclusion APIs on the I2C bus.
*/
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define I2C_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* MAC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
#define MAC_USE_ZERO_COPY FALSE
#endif
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
#define MAC_USE_EVENTS TRUE
#endif
/*===========================================================================*/
/* MMC_SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
* This option is recommended also if the SPI driver does not
* use a DMA channel and heavily loads the CPU.
*/
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
#define MMC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SDC driver related settings. */
/*===========================================================================*/
/**
* @brief Number of initialization attempts before rejecting the card.
* @note Attempts are performed at 10mS intervals.
*/
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
#define SDC_INIT_RETRY 100
#endif
/**
* @brief Include support for MMC cards.
* @note MMC support is not yet implemented so this option must be kept
* at @p FALSE.
*/
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
#define SDC_MMC_SUPPORT FALSE
#endif
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
*/
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
#define SDC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SERIAL driver related settings. */
/*===========================================================================*/
/**
* @brief Default bit rate.
* @details Configuration parameter, this is the baud rate selected for the
* default configuration.
*/
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
#define SERIAL_DEFAULT_BITRATE 38400
#endif
/**
* @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application.
* @note The default is 64 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_BUFFERS_SIZE 16
#endif
/*===========================================================================*/
/* SERIAL_USB driver related setting. */
/*===========================================================================*/
/**
* @brief Serial over USB buffers size.
* @details Configuration parameter, the buffer size must be a multiple of
* the USB data endpoint maximum packet size.
* @note The default is 64 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_USB_BUFFERS_SIZE 1
#endif
/*===========================================================================*/
/* SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
#define SPI_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define SPI_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* USB driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
#define USB_USE_WAIT TRUE
#endif
#endif /* _HALCONF_H_ */
/** @} */

80
keyboards/handwired/practice60/hsv2rgb.c Normal file
View File

@ -0,0 +1,80 @@
/* hsv2rgb.c
* Integer only conversion functions between HSV and RGB
*/
#include "hsv2rgb.h"
// TODO fix these buggy macros
#define max(x,y) ((x>y) ? x:y)
#define min(x,y) ((x>y) ? y:x)
#define min3(x,y,z) (min(min(x,y),z))
#define max3(x,y,z) (max(max(x,y),z))
rgb_color hsv2rgb(hsv_color hsv)
{
// From : http://qscribble.blogspot.fr/2008/06/integer-conversion-from-hsl-to-rgb.html
int h = hsv.h;
int s = hsv.s;
int v = hsv.v;
rgb_color rgb = {0, 0, 0};
if (v == 0)
return rgb;
// sextant = 0 .. 5
int sextant = (h*6)/256;
// f = 0 .. 42
int f = h - (sextant*256)/6;
int p = (v * (256 - s))/256;
int q = (v * (256*43 - s*f))/(256*43);
int t = (v * (256*43 - s*(43-f)))/(256*43);
// Corrige les erreurs dues aux arrondis
p = max(min(p, 255), 0);
q = max(min(q, 255), 0);
t = max(min(t, 255), 0);
switch(sextant){
case 0: rgb.r = v; rgb.g = t; rgb.b = p; break;
case 1: rgb.r = q; rgb.g = v; rgb.b = p; break;
case 2: rgb.r = p; rgb.g = v; rgb.b = t; break;
case 3: rgb.r = p; rgb.g = q; rgb.b = v; break;
case 4: rgb.r = t; rgb.g = p; rgb.b = v; break;
default:rgb.r = v; rgb.g = p; rgb.b = q; break;
}
return rgb;
}
hsv_color rgb2hsv(rgb_color rgb)
{
// From : http://www.ruinelli.ch/rgb-to-hsv
hsv_color hsv = {0, 0, 0};
int min, max, delta;
min = min3(rgb.r, rgb.g, rgb.b);
max = max3(rgb.r, rgb.g, rgb.b);
if(max==0) {
hsv.h = 0;
hsv.s = 0;
hsv.v = 0;
return hsv;
}
hsv.v = max;
delta = max - min;
hsv.s = (delta)*255 / max;
if(rgb.r == max)
hsv.h = (rgb.g - rgb.b)*42/delta; // between yellow & magenta
else if(rgb.g == max)
hsv.h = 120 + (rgb.b - rgb.r)*42/delta; // between cyan & yellow
else
hsv.h = 240 + (rgb.r - rgb.g)*42/delta; // between magenta & cyan
return hsv;
}

23
keyboards/handwired/practice60/hsv2rgb.h Normal file
View File

@ -0,0 +1,23 @@
/* hsv2rgb.h
* Convert Hue Saturation Value to Red Green Blue
*
* Programme de convertion d'une information HSV en RGB
*/
#ifndef HSV2RGB_H
#define HSV2RGB_H
typedef struct {
unsigned char h;
unsigned char s;
unsigned char v;
} hsv_color;
typedef struct {
unsigned char r;
unsigned char g;
unsigned char b;
} rgb_color;
rgb_color hsv2rgb(hsv_color hsv);
#endif

48
keyboards/handwired/practice60/keymaps/default/keymap.c Normal file
View File

@ -0,0 +1,48 @@
/*
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BASE 0
#define _FN1 1
enum custom_keycodes {
QWERTY = SAFE_RANGE,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_60_ansi(
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
KC_LCTL , KC_LGUI , KC_LALT , KC_SPC , KC_RALT , KC_RGUI , MO(_FN1) , KC_RCTL
),
[_FN1] = LAYOUT_60_ansi(
KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, \
RGB_TOG, RGB_MOD, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
BL_INC, BL_DEC, BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
KC_GRV, _______, _______, _______, _______, _______, _______, _______
)
};

105
keyboards/handwired/practice60/ld/MKL26Z64.ld Normal file
View File

@ -0,0 +1,105 @@
/*
* Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
* (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
/*
* KL26Z64 memory setup.
*/
MEMORY
{
flash0 : org = 0x00000000, len = 0x100
flash1 : org = 0x00000400, len = 0x10
flash2 : org = 0x00000410, len = 62k - 0x410
flash3 : org = 0x0000F800, len = 2k
flash4 : org = 0x00000000, len = 0
flash5 : org = 0x00000000, len = 0
flash6 : org = 0x00000000, len = 0
flash7 : org = 0x00000000, len = 0
ram0 : org = 0x1FFFF800, len = 8k
ram1 : org = 0x00000000, len = 0
ram2 : org = 0x00000000, len = 0
ram3 : org = 0x00000000, len = 0
ram4 : org = 0x00000000, len = 0
ram5 : org = 0x00000000, len = 0
ram6 : org = 0x00000000, len = 0
ram7 : org = 0x00000000, len = 0
}
/* Flash region for the configuration bytes.*/
SECTIONS
{
.cfmprotect : ALIGN(4) SUBALIGN(4)
{
KEEP(*(.cfmconfig))
} > flash1
}
/* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash0);
REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
/* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash2);
REGION_ALIAS("XTORS_FLASH_LMA", flash2);
/* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash2);
REGION_ALIAS("TEXT_FLASH_LMA", flash2);
/* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash2);
REGION_ALIAS("RODATA_FLASH_LMA", flash2);
/* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash2);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
/* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
/* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by
the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash2);
/* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0);
__eeprom_workarea_start__ = ORIGIN(flash3);
__eeprom_workarea_size__ = LENGTH(flash3);
__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__;
/* Generic rules inclusion.*/
INCLUDE rules.ld

88
keyboards/handwired/practice60/ld/STM32F103x8_stm32duino_bootloader.ld Normal file
View File

@ -0,0 +1,88 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* ST32F103xB memory setup for use with the maplemini bootloader.
* You will have to
* #define CORTEX_VTOR_INIT 0x5000
* in your projects chconf.h
*/
MEMORY
{
flash0 : org = 0x08002000, len = 64k - 0x2000
flash1 : org = 0x00000000, len = 0
flash2 : org = 0x00000000, len = 0
flash3 : org = 0x00000000, len = 0
flash4 : org = 0x00000000, len = 0
flash5 : org = 0x00000000, len = 0
flash6 : org = 0x00000000, len = 0
flash7 : org = 0x00000000, len = 0
ram0 : org = 0x20000000, len = 20k
ram1 : org = 0x00000000, len = 0
ram2 : org = 0x00000000, len = 0
ram3 : org = 0x00000000, len = 0
ram4 : org = 0x00000000, len = 0
ram5 : org = 0x00000000, len = 0
ram6 : org = 0x00000000, len = 0
ram7 : org = 0x00000000, len = 0
}
/* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash0);
REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
/* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash0);
REGION_ALIAS("XTORS_FLASH_LMA", flash0);
/* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash0);
REGION_ALIAS("TEXT_FLASH_LMA", flash0);
/* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash0);
REGION_ALIAS("RODATA_FLASH_LMA", flash0);
/* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash0);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
/* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
/* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by
the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash0);
/* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0);
/* Generic rules inclusion.*/
INCLUDE rules.ld

51
keyboards/handwired/practice60/led.c Normal file
View File

@ -0,0 +1,51 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "hal.h"
#include "backlight.h"
#include "led.h"
#include "printf.h"
void backlight_init_ports(void) {
printf("backlight_init_ports()\n");
#ifdef BACKLIGHT_ENABLE
palSetPadMode(GPIOA, 8, PAL_MODE_OUTPUT_PUSHPULL);
palSetPad(GPIOA, 8);
#endif
}
void backlight_set(uint8_t level) {
printf("backlight_set(%d)\n", level);
#ifdef BACKLIGHT_ENABLE
if (level == 0) {
// Turn backlight off
palSetPad(GPIOA, 8);
} else {
// Turn backlight on
palClearPad(GPIOA, 8);
}
#endif
}
void led_set(uint8_t usb_led)
{
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
palClearPad(GPIOC, 13);
} else {
palSetPad(GPIOC, 13);
}
}

209
keyboards/handwired/practice60/mcuconf.h Normal file
View File

@ -0,0 +1,209 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _MCUCONF_H_
#define _MCUCONF_H_
#define STM32F103_MCUCONF
/*
* STM32F103 drivers configuration.
* The following settings override the default settings present in
* the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h.
*
* IRQ priorities:
* 15...0 Lowest...Highest.
*
* DMA priorities:
* 0...3 Lowest...Highest.
*/
/*
* HAL driver system settings.
*/
#define STM32_NO_INIT FALSE
#define STM32_HSI_ENABLED TRUE
#define STM32_LSI_ENABLED FALSE
#define STM32_HSE_ENABLED TRUE
#define STM32_LSE_ENABLED FALSE
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSE
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
#define STM32_PLLMUL_VALUE 9
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE1 STM32_PPRE1_DIV2
#define STM32_PPRE2 STM32_PPRE2_DIV2
#define STM32_ADCPRE STM32_ADCPRE_DIV4
#define STM32_USB_CLOCK_REQUIRED TRUE
#define STM32_USBPRE STM32_USBPRE_DIV1P5
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
#define STM32_RTCSEL STM32_RTCSEL_HSEDIV
#define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0
/*
* ADC driver system settings.
*/
#define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_ADC1_IRQ_PRIORITY 6
/*
* CAN driver system settings.
*/
#define STM32_CAN_USE_CAN1 FALSE
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
/*
* EXT driver system settings.
*/
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
/*
* GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
#define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_USE_TIM4 FALSE
#define STM32_GPT_USE_TIM5 FALSE
#define STM32_GPT_USE_TIM8 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
#define STM32_GPT_TIM5_IRQ_PRIORITY 7
#define STM32_GPT_TIM8_IRQ_PRIORITY 7
/*
* I2C driver system settings.
*/
#define STM32_I2C_USE_I2C1 FALSE
#define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
#define STM32_I2C_I2C1_DMA_PRIORITY 3
#define STM32_I2C_I2C2_DMA_PRIORITY 3
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
/*
* ICU driver system settings.
*/
#define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE
#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_USE_TIM4 FALSE
#define STM32_ICU_USE_TIM5 FALSE
#define STM32_ICU_USE_TIM8 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
#define STM32_ICU_TIM5_IRQ_PRIORITY 7
#define STM32_ICU_TIM8_IRQ_PRIORITY 7
/*
* PWM driver system settings.
*/
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_USE_TIM4 FALSE
#define STM32_PWM_USE_TIM5 FALSE
#define STM32_PWM_USE_TIM8 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
#define STM32_PWM_TIM5_IRQ_PRIORITY 7
#define STM32_PWM_TIM8_IRQ_PRIORITY 7
/*
* RTC driver system settings.
*/
#define STM32_RTC_IRQ_PRIORITY 15
/*
* SERIAL driver system settings.
*/
#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USE_USART3 FALSE
#define STM32_SERIAL_USE_UART4 FALSE
#define STM32_SERIAL_USE_UART5 FALSE
#define STM32_SERIAL_USART1_PRIORITY 12
#define STM32_SERIAL_USART2_PRIORITY 12
#define STM32_SERIAL_USART3_PRIORITY 12
#define STM32_SERIAL_UART4_PRIORITY 12
#define STM32_SERIAL_UART5_PRIORITY 12
/*
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
#define STM32_SPI_USE_SPI2 TRUE
#define STM32_SPI_USE_SPI3 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI3_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
/*
* ST driver system settings.
*/
#define STM32_ST_IRQ_PRIORITY 8
#define STM32_ST_USE_TIMER 2
/*
* UART driver system settings.
*/
#define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
/*
* USB driver system settings.
*/
#define STM32_USB_USE_USB1 TRUE
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
#endif /* _MCUCONF_H_ */

32
keyboards/handwired/practice60/practice60.c Normal file
View File

@ -0,0 +1,32 @@
#include "practice60.h"
#include "ch.h"
#include "hal.h"
#include "underglow.h"
#include "print.h"
#include "debug.h"
#include "util.h"
/* generic STM32F103C8T6 board */
#ifdef BOARD_GENERIC_STM32_F103
#define LED_ON() do { palClearPad(GPIOC, 13) ;} while (0)
#define LED_OFF() do { palSetPad(GPIOC, 13); } while (0)
#define LED_TGL() do { palTogglePad(GPIOC, 13); } while (0)
#endif
void matrix_init_kb(void){
/* MOSI pin*/
palSetPadMode(GPIOB, 15, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
LED_ON();
palSetPad(GPIOA, 8);
wait_ms(500);
palClearPad(GPIOA, 8);
LED_OFF();
leds_init();
}

18
keyboards/handwired/practice60/practice60.h Normal file
View File

@ -0,0 +1,18 @@
#pragma once
#include "quantum.h"
#define LAYOUT_60_ansi( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \
K40, K41, K42, K43, K49, K4A, K4B, K4C \
) { \
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B }, \
{ K40, K41, K42, K43, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C }, \
}

3
keyboards/handwired/practice60/readme.md Normal file
View File

@ -0,0 +1,3 @@
# Practice 60
Blue Pill STM32F103C8T6 based 60% board

56
keyboards/handwired/practice60/rules.mk Normal file
View File

@ -0,0 +1,56 @@
# project specific files
SRC = led.c \
underglow.c \
hsv2rgb.c
# GENERIC STM32F103C8T6 board - stm32duino bootloader
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = GENERIC_STM32_F103
# OPT_DEFS =
# MCU_LDSCRIPT = STM32F103x8
# BOARD = GENERIC_STM32_F103
## chip/board settings
# the next two should match the directories in
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
MCU_FAMILY = STM32
MCU_SERIES = STM32F1xx
# linker script to use
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
# or <this_dir>/ld/
# startup code to use
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
MCU_STARTUP = stm32f1xx
# it should exist either in <chibios>/os/hal/boards/
# or <this_dir>/boards
# Cortex version
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
MCU = cortex-m3
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
ARMV = 7
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
# a custom board definition that you plan to reuse).
# If you're not setting it here, leave it commented out.
# It is chip dependent, the correct number can be looked up here (page 175):
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
# This also requires a patch to chibios:
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = yes
LAYOUTS = 60_ansi
DEFAULT_FOLDER = handwired/practice60

157
keyboards/handwired/practice60/underglow.c Normal file
View File

@ -0,0 +1,157 @@
#include "ch.h"
#include "hal.h"
#include "hsv2rgb.h"
#include "underglow.h"
#define BYTES_FOR_LED_BYTE 4
#define NB_COLORS 3
#define BYTES_FOR_LED BYTES_FOR_LED_BYTE*NB_COLORS
#define DATA_SIZE BYTES_FOR_LED*NB_LEDS
#define RESET_SIZE 200
#define PREAMBLE_SIZE 4
// Define the spi your LEDs are plugged to here
#define LEDS_SPI SPID2
// Define the number of LEDs you wish to control in your LED strip
#define NB_LEDS 8
#define LED_SPIRAL 1
static uint8_t txbuf[PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE];
static uint8_t get_protocol_eq(uint8_t data, int pos);
/*
* This lib is meant to be used asynchronously, thus the colors contained in
* the txbuf will be sent in loop, so that the colors are always the ones you
* put in the table (the user thus have less to worry about)
*
* Since the data are sent via DMA, and the call to spiSend is a blocking one,
* the processor ressources are not used to much, if you see your program being
* too slow, simply add a:
* chThdSleepMilliseconds(x);
* after the spiSend, where you increment x untill you are satisfied with your
* program speed, another trick may be to lower this thread priority : your call
*/
static THD_WORKING_AREA(LEDS_THREAD_WA, 128);
static THD_FUNCTION(ledsThread, arg) {
(void) arg;
while(1){
spiSend(&LEDS_SPI, PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE, txbuf);
}
}
#if LED_SPIRAL
/*
* 'Led spiral' is a simple demo in which we put all the leds to the same
* color, where this color does all the hsv circle in loop.
* If you want to launch the thread that will chage the led colors to the
* appropriate value, simply set LED_SPIRAL to 1.
*/
static THD_WORKING_AREA(HSVTRANS_WA, 128);
static THD_FUNCTION(hsv_transThread, arg){
(void) arg;
hsv_color color = {0, 255, 127};
while(1){
color.h += 1;
color.h %= 256;
set_leds_color_hsv(color);
chThdSleepMilliseconds(50);
}
}
#endif
static const SPIConfig spicfg = {
NULL,
GPIOB,
15,
SPI_CR1_BR_1|SPI_CR1_BR_0 // baudrate : fpclk / 8 => 1tick is 0.32us
};
/*
* Function used to initialize the driver.
*
* Starts by shutting off all the LEDs.
* Then gets access on the LED_SPI driver.
* May eventually launch an animation on the LEDs (e.g. a thread setting the
* txbuff values)
*/
void leds_init(void){
for(int i = 0; i < RESET_SIZE; i++)
txbuf[DATA_SIZE+i] = 0x00;
for (int i=0; i<PREAMBLE_SIZE; i++)
txbuf[i] = 0x00;
spiAcquireBus(&LEDS_SPI); /* Acquire ownership of the bus. */
spiStart(&LEDS_SPI, &spicfg); /* Setup transfer parameters. */
spiSelect(&LEDS_SPI); /* Slave Select assertion. */
chThdCreateStatic(LEDS_THREAD_WA, sizeof(LEDS_THREAD_WA),NORMALPRIO, ledsThread, NULL);
#if LED_SPIRAL
chThdCreateStatic(HSVTRANS_WA, sizeof(HSVTRANS_WA),
NORMALPRIO, hsv_transThread, NULL);
#endif
}
/*
* As the trick here is to use the SPI to send a huge pattern of 0 and 1 to
* the ws2812b protocol, we use this helper function to translate bytes into
* 0s and 1s for the LED (with the appropriate timing).
*/
static uint8_t get_protocol_eq(uint8_t data, int pos){
uint8_t eq = 0;
if (data & (1 << (2*(3-pos))))
eq = 0b1110;
else
eq = 0b1000;
if (data & (2 << (2*(3-pos))))
eq += 0b11100000;
else
eq += 0b10000000;
return eq;
}
/*
* If you want to set a LED's color in the HSV color space, simply call this
* function with a hsv_color containing the desired color and the index of the
* led on the LED strip (starting from 0, the first one being the closest the
* first plugged to the board)
*
* Only set the color of the LEDs through the functions given by this API
* (unless you really know what you are doing)
*/
void set_led_color_hsv(hsv_color color, int pos){
set_led_color_rgb(hsv2rgb(color), pos);
}
/*
* If you want to set a LED's color in the RGB color space, simply call this
* function with a hsv_color containing the desired color and the index of the
* led on the LED strip (starting from 0, the first one being the closest the
* first plugged to the board)
*
* Only set the color of the LEDs through the functions given by this API
* (unless you really know what you are doing)
*/
void set_led_color_rgb(rgb_color color, int pos){
for(int j = 0; j < 4; j++)
txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + j] = get_protocol_eq(color.g, j);
for(int j = 0; j < 4; j++)
txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE+j] = get_protocol_eq(color.r, j);
for(int j = 0; j < 4; j++)
txbuf[PREAMBLE_SIZE + BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE*2+j] = get_protocol_eq(color.b, j);
}
/*
* Same as the two above, but sets all the LEDs in the LED strip (HSV)
*/
void set_leds_color_hsv(hsv_color color){
for(int i = 0; i < NB_LEDS; i++)
set_led_color_hsv(color, i);
}
/*
* Same as the two above, but sets all the LEDs in the LED strip (RGB)
*/
void set_leds_color_rgb(rgb_color color){
for(int i = 0; i < NB_LEDS; i++)
set_led_color_rgb(color, i);
}

10
keyboards/handwired/practice60/underglow.h Normal file
View File

@ -0,0 +1,10 @@
#pragma once
#include "hsv2rgb.h"
void set_leds_color_hsv(hsv_color color);
void set_leds_color_rgb(rgb_color color);
void set_led_color_hsv(hsv_color color, int pos);
void set_led_color_rgb(rgb_color color, int pos);
void leds_init(void);