Integrating Peter Fleury's HD44780 LCD library (#3209)
* integrated Peter Fleury's LCD library for HD44780 LCDs * fixed typo * cleanup finished * add documentation * added HD44780 documentation * removed keyboard from .gitmodules * resolved merge conflict * removed edit of kira75s rules.mk made by merge * moved hd44780 to drivers/avr * Added licence info to hd44780 files * Added link to hd44780 docs.
This commit is contained in:
Max Audron
Jack Humbert
parent
81756d7b21
commit
bbea9dadbc
|
|
@ -197,6 +197,12 @@ ifeq ($(strip $(USB_HID_ENABLE)), yes)
|
||||||
include $(TMK_DIR)/protocol/usb_hid.mk
|
include $(TMK_DIR)/protocol/usb_hid.mk
|
||||||
endif
|
endif
|
||||||
|
|
||||||
|
|
||||||
|
ifeq ($(strip $(HD44780_ENABLE)), yes)
|
||||||
|
SRC += drivers/avr/hd44780.c
|
||||||
|
OPT_DEFS += -DHD44780_ENABLE
|
||||||
|
endif
|
||||||
|
|
||||||
QUANTUM_SRC:= \
|
QUANTUM_SRC:= \
|
||||||
$(QUANTUM_DIR)/quantum.c \
|
$(QUANTUM_DIR)/quantum.c \
|
||||||
$(QUANTUM_DIR)/keymap_common.c \
|
$(QUANTUM_DIR)/keymap_common.c \
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,56 @@
|
||||||
|
# HD44780 LCD Displays
|
||||||
|
|
||||||
|
This is an integration of Peter Fleury's LCD library. This page will explain the basics. [For in depth documentation visit his page.](http://homepage.hispeed.ch/peterfleury/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)
|
||||||
|
|
||||||
|
You can enable support for HD44780 Displays by setting the `HD44780_ENABLE` flag in your keyboards `rules.mk` to yes. This will use about 400 KB of extra space.
|
||||||
|
|
||||||
|
## Configuration
|
||||||
|
|
||||||
|
You will need to configure the pins used by your display and its number of lines and collumn in your keyboards `config.h`.
|
||||||
|
|
||||||
|
Uncomment the section labled HD44780 and change the parameters as needed.
|
||||||
|
````
|
||||||
|
/*
|
||||||
|
* HD44780 LCD Display Configuration
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define LCD_LINES 2 //< number of visible lines of the display
|
||||||
|
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
||||||
|
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
||||||
|
#if LCD_IO_MODE
|
||||||
|
#define LCD_PORT PORTB //< port for the LCD lines
|
||||||
|
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
||||||
|
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
||||||
|
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
||||||
|
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
||||||
|
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
||||||
|
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
||||||
|
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
||||||
|
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
||||||
|
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
||||||
|
#define LCD_RS_PIN 3 //< pin for RS line
|
||||||
|
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
||||||
|
#define LCD_RW_PIN 2 //< pin for RW line
|
||||||
|
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
||||||
|
#define LCD_E_PIN 1 //< pin for Enable line
|
||||||
|
#endif
|
||||||
|
````
|
||||||
|
|
||||||
|
Should you need to configure other properties you can copy them from `quantum/hd44780.h` and set them in your `config.h`
|
||||||
|
|
||||||
|
## Usage
|
||||||
|
|
||||||
|
To initialize your display call lcd_init() with one of these parameters:
|
||||||
|
````
|
||||||
|
LCD_DISP_OFF : display off
|
||||||
|
LCD_DISP_ON : display on, cursor off
|
||||||
|
LCD_DISP_ON_CURSOR : display on, cursor on
|
||||||
|
LCD_DISP_ON_CURSOR_BLINK : display on, cursor on flashing
|
||||||
|
````
|
||||||
|
This is best done in your keyboards `matrix_init_kb` or your keymaps `matrix_init_user`.
|
||||||
|
It is advised to clear the display before use.
|
||||||
|
To do so call `lcd_clrsrc()`.
|
||||||
|
|
||||||
|
To now print something to your Display you first call `lcd_gotoxy(column, line)`. To go to the start of the first line you would call `lcd_gotoxy(0, 0)` and then print a string with `lcd_puts("example string")`.
|
||||||
|
|
||||||
|
There are more posible methods to control the display. [For in depth documentation please visit the linked page.](http://homepage.hispeed.ch/peterfleury/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)
|
||||||
|
|
@ -9,6 +9,7 @@ QMK has a staggering number of features for building your keyboard. It can take
|
||||||
* [Backlight](feature_backlight.md) - LED lighting support for your keyboard.
|
* [Backlight](feature_backlight.md) - LED lighting support for your keyboard.
|
||||||
* [Bootmagic](feature_bootmagic.md) - Adjust the behavior of your keyboard using hotkeys.
|
* [Bootmagic](feature_bootmagic.md) - Adjust the behavior of your keyboard using hotkeys.
|
||||||
* [Dynamic Macros](feature_dynamic_macros.md) - Record and playback macros from the keyboard itself.
|
* [Dynamic Macros](feature_dynamic_macros.md) - Record and playback macros from the keyboard itself.
|
||||||
|
* [HD44780 LCD Display](feature_hd44780.md) - Support for LCD character displays using the HD44780 standard.
|
||||||
* [Key Lock](feature_key_lock.md) - Lock a key in the "down" state.
|
* [Key Lock](feature_key_lock.md) - Lock a key in the "down" state.
|
||||||
* [Layouts](feature_layouts.md) - Use one keymap with any keyboard that supports your layout.
|
* [Layouts](feature_layouts.md) - Use one keymap with any keyboard that supports your layout.
|
||||||
* [Leader Key](feature_leader_key.md) - Tap the leader key followed by a sequence to trigger custom behavior.
|
* [Leader Key](feature_leader_key.md) - Tap the leader key followed by a sequence to trigger custom behavior.
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,592 @@
|
||||||
|
/****************************************************************************
|
||||||
|
Title: HD44780U LCD library
|
||||||
|
Author: Peter Fleury <pfleury@gmx.ch> http://tinyurl.com/peterfleury
|
||||||
|
License: GNU General Public License Version 3
|
||||||
|
File: $Id: lcd.c,v 1.15.2.2 2015/01/17 12:16:05 peter Exp $
|
||||||
|
Software: AVR-GCC 3.3
|
||||||
|
Target: any AVR device, memory mapped mode only for AT90S4414/8515/Mega
|
||||||
|
|
||||||
|
DESCRIPTION
|
||||||
|
Basic routines for interfacing a HD44780U-based text lcd display
|
||||||
|
|
||||||
|
Originally based on Volker Oth's lcd library,
|
||||||
|
changed lcd_init(), added additional constants for lcd_command(),
|
||||||
|
added 4-bit I/O mode, improved and optimized code.
|
||||||
|
|
||||||
|
Library can be operated in memory mapped mode (LCD_IO_MODE=0) or in
|
||||||
|
4-bit IO port mode (LCD_IO_MODE=1). 8-bit IO port mode not supported.
|
||||||
|
|
||||||
|
Memory mapped mode compatible with Kanda STK200, but supports also
|
||||||
|
generation of R/W signal through A8 address line.
|
||||||
|
|
||||||
|
USAGE
|
||||||
|
See the C include lcd.h file for a description of each function
|
||||||
|
|
||||||
|
*****************************************************************************/
|
||||||
|
#include <inttypes.h>
|
||||||
|
#include <avr/io.h>
|
||||||
|
#include <avr/pgmspace.h>
|
||||||
|
#include <util/delay.h>
|
||||||
|
#include "hd44780.h"
|
||||||
|
|
||||||
|
/*
|
||||||
|
** constants/macros
|
||||||
|
*/
|
||||||
|
#define DDR(x) (*(&x - 1)) /* address of data direction register of port x */
|
||||||
|
#if defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
|
||||||
|
/* on ATmega64/128 PINF is on port 0x00 and not 0x60 */
|
||||||
|
#define PIN(x) ( &PORTF==&(x) ? _SFR_IO8(0x00) : (*(&x - 2)) )
|
||||||
|
#else
|
||||||
|
#define PIN(x) (*(&x - 2)) /* address of input register of port x */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
#if LCD_IO_MODE
|
||||||
|
#define lcd_e_delay() _delay_us(LCD_DELAY_ENABLE_PULSE)
|
||||||
|
#define lcd_e_high() LCD_E_PORT |= _BV(LCD_E_PIN);
|
||||||
|
#define lcd_e_low() LCD_E_PORT &= ~_BV(LCD_E_PIN);
|
||||||
|
#define lcd_e_toggle() toggle_e()
|
||||||
|
#define lcd_rw_high() LCD_RW_PORT |= _BV(LCD_RW_PIN)
|
||||||
|
#define lcd_rw_low() LCD_RW_PORT &= ~_BV(LCD_RW_PIN)
|
||||||
|
#define lcd_rs_high() LCD_RS_PORT |= _BV(LCD_RS_PIN)
|
||||||
|
#define lcd_rs_low() LCD_RS_PORT &= ~_BV(LCD_RS_PIN)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if LCD_IO_MODE
|
||||||
|
#if LCD_LINES==1
|
||||||
|
#define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_1LINE
|
||||||
|
#else
|
||||||
|
#define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_2LINES
|
||||||
|
#endif
|
||||||
|
#else
|
||||||
|
#if LCD_LINES==1
|
||||||
|
#define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_1LINE
|
||||||
|
#else
|
||||||
|
#define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_2LINES
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if LCD_CONTROLLER_KS0073
|
||||||
|
#if LCD_LINES==4
|
||||||
|
|
||||||
|
#define KS0073_EXTENDED_FUNCTION_REGISTER_ON 0x2C /* |0|010|1100 4-bit mode, extension-bit RE = 1 */
|
||||||
|
#define KS0073_EXTENDED_FUNCTION_REGISTER_OFF 0x28 /* |0|010|1000 4-bit mode, extension-bit RE = 0 */
|
||||||
|
#define KS0073_4LINES_MODE 0x09 /* |0|000|1001 4 lines mode */
|
||||||
|
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
** function prototypes
|
||||||
|
*/
|
||||||
|
#if LCD_IO_MODE
|
||||||
|
static void toggle_e(void);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
** local functions
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
/*************************************************************************
|
||||||
|
delay for a minimum of <us> microseconds
|
||||||
|
the number of loops is calculated at compile-time from MCU clock frequency
|
||||||
|
*************************************************************************/
|
||||||
|
#define delay(us) _delay_us(us)
|
||||||
|
|
||||||
|
|
||||||
|
#if LCD_IO_MODE
|
||||||
|
/* toggle Enable Pin to initiate write */
|
||||||
|
static void toggle_e(void)
|
||||||
|
{
|
||||||
|
lcd_e_high();
|
||||||
|
lcd_e_delay();
|
||||||
|
lcd_e_low();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
/*************************************************************************
|
||||||
|
Low-level function to write byte to LCD controller
|
||||||
|
Input: data byte to write to LCD
|
||||||
|
rs 1: write data
|
||||||
|
0: write instruction
|
||||||
|
Returns: none
|
||||||
|
*************************************************************************/
|
||||||
|
#if LCD_IO_MODE
|
||||||
|
static void lcd_write(uint8_t data,uint8_t rs)
|
||||||
|
{
|
||||||
|
unsigned char dataBits ;
|
||||||
|
|
||||||
|
|
||||||
|
if (rs) { /* write data (RS=1, RW=0) */
|
||||||
|
lcd_rs_high();
|
||||||
|
} else { /* write instruction (RS=0, RW=0) */
|
||||||
|
lcd_rs_low();
|
||||||
|
}
|
||||||
|
lcd_rw_low(); /* RW=0 write mode */
|
||||||
|
|
||||||
|
if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT )
|
||||||
|
&& (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) )
|
||||||
|
{
|
||||||
|
/* configure data pins as output */
|
||||||
|
DDR(LCD_DATA0_PORT) |= 0x0F;
|
||||||
|
|
||||||
|
/* output high nibble first */
|
||||||
|
dataBits = LCD_DATA0_PORT & 0xF0;
|
||||||
|
LCD_DATA0_PORT = dataBits |((data>>4)&0x0F);
|
||||||
|
lcd_e_toggle();
|
||||||
|
|
||||||
|
/* output low nibble */
|
||||||
|
LCD_DATA0_PORT = dataBits | (data&0x0F);
|
||||||
|
lcd_e_toggle();
|
||||||
|
|
||||||
|
/* all data pins high (inactive) */
|
||||||
|
LCD_DATA0_PORT = dataBits | 0x0F;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
/* configure data pins as output */
|
||||||
|
DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN);
|
||||||
|
DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN);
|
||||||
|
DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN);
|
||||||
|
DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN);
|
||||||
|
|
||||||
|
/* output high nibble first */
|
||||||
|
LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN);
|
||||||
|
LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN);
|
||||||
|
LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN);
|
||||||
|
LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN);
|
||||||
|
if(data & 0x80) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
|
||||||
|
if(data & 0x40) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
|
||||||
|
if(data & 0x20) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
|
||||||
|
if(data & 0x10) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
|
||||||
|
lcd_e_toggle();
|
||||||
|
|
||||||
|
/* output low nibble */
|
||||||
|
LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN);
|
||||||
|
LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN);
|
||||||
|
LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN);
|
||||||
|
LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN);
|
||||||
|
if(data & 0x08) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
|
||||||
|
if(data & 0x04) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
|
||||||
|
if(data & 0x02) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
|
||||||
|
if(data & 0x01) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
|
||||||
|
lcd_e_toggle();
|
||||||
|
|
||||||
|
/* all data pins high (inactive) */
|
||||||
|
LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
|
||||||
|
LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
|
||||||
|
LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
|
||||||
|
LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
#define lcd_write(d,rs) if (rs) *(volatile uint8_t*)(LCD_IO_DATA) = d; else *(volatile uint8_t*)(LCD_IO_FUNCTION) = d;
|
||||||
|
/* rs==0 -> write instruction to LCD_IO_FUNCTION */
|
||||||
|
/* rs==1 -> write data to LCD_IO_DATA */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
/*************************************************************************
|
||||||
|
Low-level function to read byte from LCD controller
|
||||||
|
Input: rs 1: read data
|
||||||
|
0: read busy flag / address counter
|
||||||
|
Returns: byte read from LCD controller
|
||||||
|
*************************************************************************/
|
||||||
|
#if LCD_IO_MODE
|
||||||
|
static uint8_t lcd_read(uint8_t rs)
|
||||||
|
{
|
||||||
|
uint8_t data;
|
||||||
|
|
||||||
|
|
||||||
|
if (rs)
|
||||||
|
lcd_rs_high(); /* RS=1: read data */
|
||||||
|
else
|
||||||
|
lcd_rs_low(); /* RS=0: read busy flag */
|
||||||
|
lcd_rw_high(); /* RW=1 read mode */
|
||||||
|
|
||||||
|
if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT )
|
||||||
|
&& ( LCD_DATA0_PIN == 0 )&& (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) )
|
||||||
|
{
|
||||||
|
DDR(LCD_DATA0_PORT) &= 0xF0; /* configure data pins as input */
|
||||||
|
|
||||||
|
lcd_e_high();
|
||||||
|
lcd_e_delay();
|
||||||
|
data = PIN(LCD_DATA0_PORT) << 4; /* read high nibble first */
|
||||||
|
lcd_e_low();
|
||||||
|
|
||||||
|
lcd_e_delay(); /* Enable 500ns low */
|
||||||
|
|
||||||
|
lcd_e_high();
|
||||||
|
lcd_e_delay();
|
||||||
|
data |= PIN(LCD_DATA0_PORT)&0x0F; /* read low nibble */
|
||||||
|
lcd_e_low();
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
/* configure data pins as input */
|
||||||
|
DDR(LCD_DATA0_PORT) &= ~_BV(LCD_DATA0_PIN);
|
||||||
|
DDR(LCD_DATA1_PORT) &= ~_BV(LCD_DATA1_PIN);
|
||||||
|
DDR(LCD_DATA2_PORT) &= ~_BV(LCD_DATA2_PIN);
|
||||||
|
DDR(LCD_DATA3_PORT) &= ~_BV(LCD_DATA3_PIN);
|
||||||
|
|
||||||
|
/* read high nibble first */
|
||||||
|
lcd_e_high();
|
||||||
|
lcd_e_delay();
|
||||||
|
data = 0;
|
||||||
|
if ( PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN) ) data |= 0x10;
|
||||||
|
if ( PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN) ) data |= 0x20;
|
||||||
|
if ( PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN) ) data |= 0x40;
|
||||||
|
if ( PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN) ) data |= 0x80;
|
||||||
|
lcd_e_low();
|
||||||
|
|
||||||
|
lcd_e_delay(); /* Enable 500ns low */
|
||||||
|
|
||||||
|
/* read low nibble */
|
||||||
|
lcd_e_high();
|
||||||
|
lcd_e_delay();
|
||||||
|
if ( PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN) ) data |= 0x01;
|
||||||
|
if ( PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN) ) data |= 0x02;
|
||||||
|
if ( PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN) ) data |= 0x04;
|
||||||
|
if ( PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN) ) data |= 0x08;
|
||||||
|
lcd_e_low();
|
||||||
|
}
|
||||||
|
return data;
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
#define lcd_read(rs) (rs) ? *(volatile uint8_t*)(LCD_IO_DATA+LCD_IO_READ) : *(volatile uint8_t*)(LCD_IO_FUNCTION+LCD_IO_READ)
|
||||||
|
/* rs==0 -> read instruction from LCD_IO_FUNCTION */
|
||||||
|
/* rs==1 -> read data from LCD_IO_DATA */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
/*************************************************************************
|
||||||
|
loops while lcd is busy, returns address counter
|
||||||
|
*************************************************************************/
|
||||||
|
static uint8_t lcd_waitbusy(void)
|
||||||
|
|
||||||
|
{
|
||||||
|
register uint8_t c;
|
||||||
|
|
||||||
|
/* wait until busy flag is cleared */
|
||||||
|
while ( (c=lcd_read(0)) & (1<<LCD_BUSY)) {}
|
||||||
|
|
||||||
|
/* the address counter is updated 4us after the busy flag is cleared */
|
||||||
|
delay(LCD_DELAY_BUSY_FLAG);
|
||||||
|
|
||||||
|
/* now read the address counter */
|
||||||
|
return (lcd_read(0)); // return address counter
|
||||||
|
|
||||||
|
}/* lcd_waitbusy */
|
||||||
|
|
||||||
|
|
||||||
|
/*************************************************************************
|
||||||
|
Move cursor to the start of next line or to the first line if the cursor
|
||||||
|
is already on the last line.
|
||||||
|
*************************************************************************/
|
||||||
|
static inline void lcd_newline(uint8_t pos)
|
||||||
|
{
|
||||||
|
register uint8_t addressCounter;
|
||||||
|
|
||||||
|
|
||||||
|
#if LCD_LINES==1
|
||||||
|
addressCounter = 0;
|
||||||
|
#endif
|
||||||
|
#if LCD_LINES==2
|
||||||
|
if ( pos < (LCD_START_LINE2) )
|
||||||
|
addressCounter = LCD_START_LINE2;
|
||||||
|
else
|
||||||
|
addressCounter = LCD_START_LINE1;
|
||||||
|
#endif
|
||||||
|
#if LCD_LINES==4
|
||||||
|
#if KS0073_4LINES_MODE
|
||||||
|
if ( pos < LCD_START_LINE2 )
|
||||||
|
addressCounter = LCD_START_LINE2;
|
||||||
|
else if ( (pos >= LCD_START_LINE2) && (pos < LCD_START_LINE3) )
|
||||||
|
addressCounter = LCD_START_LINE3;
|
||||||
|
else if ( (pos >= LCD_START_LINE3) && (pos < LCD_START_LINE4) )
|
||||||
|
addressCounter = LCD_START_LINE4;
|
||||||
|
else
|
||||||
|
addressCounter = LCD_START_LINE1;
|
||||||
|
#else
|
||||||
|
if ( pos < LCD_START_LINE3 )
|
||||||
|
addressCounter = LCD_START_LINE2;
|
||||||
|
else if ( (pos >= LCD_START_LINE2) && (pos < LCD_START_LINE4) )
|
||||||
|
addressCounter = LCD_START_LINE3;
|
||||||
|
else if ( (pos >= LCD_START_LINE3) && (pos < LCD_START_LINE2) )
|
||||||
|
addressCounter = LCD_START_LINE4;
|
||||||
|
else
|
||||||
|
addressCounter = LCD_START_LINE1;
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
lcd_command((1<<LCD_DDRAM)+addressCounter);
|
||||||
|
|
||||||
|
}/* lcd_newline */
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
** PUBLIC FUNCTIONS
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*************************************************************************
|
||||||
|
Send LCD controller instruction command
|
||||||
|
Input: instruction to send to LCD controller, see HD44780 data sheet
|
||||||
|
Returns: none
|
||||||
|
*************************************************************************/
|
||||||
|
void lcd_command(uint8_t cmd)
|
||||||
|
{
|
||||||
|
lcd_waitbusy();
|
||||||
|
lcd_write(cmd,0);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*************************************************************************
|
||||||
|
Send data byte to LCD controller
|
||||||
|
Input: data to send to LCD controller, see HD44780 data sheet
|
||||||
|
Returns: none
|
||||||
|
*************************************************************************/
|
||||||
|
void lcd_data(uint8_t data)
|
||||||
|
{
|
||||||
|
lcd_waitbusy();
|
||||||
|
lcd_write(data,1);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/*************************************************************************
|
||||||
|
Set cursor to specified position
|
||||||
|
Input: x horizontal position (0: left most position)
|
||||||
|
y vertical position (0: first line)
|
||||||
|
Returns: none
|
||||||
|
*************************************************************************/
|
||||||
|
void lcd_gotoxy(uint8_t x, uint8_t y)
|
||||||
|
{
|
||||||
|
#if LCD_LINES==1
|
||||||
|
lcd_command((1<<LCD_DDRAM)+LCD_START_LINE1+x);
|
||||||
|
#endif
|
||||||
|
#if LCD_LINES==2
|
||||||
|
if ( y==0 )
|
||||||
|
lcd_command((1<<LCD_DDRAM)+LCD_START_LINE1+x);
|
||||||
|
else
|
||||||
|
lcd_command((1<<LCD_DDRAM)+LCD_START_LINE2+x);
|
||||||
|
#endif
|
||||||
|
#if LCD_LINES==4
|
||||||
|
if ( y==0 )
|
||||||
|
lcd_command((1<<LCD_DDRAM)+LCD_START_LINE1+x);
|
||||||
|
else if ( y==1)
|
||||||
|
lcd_command((1<<LCD_DDRAM)+LCD_START_LINE2+x);
|
||||||
|
else if ( y==2)
|
||||||
|
lcd_command((1<<LCD_DDRAM)+LCD_START_LINE3+x);
|
||||||
|
else /* y==3 */
|
||||||
|
lcd_command((1<<LCD_DDRAM)+LCD_START_LINE4+x);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
}/* lcd_gotoxy */
|
||||||
|
|
||||||
|
|
||||||
|
/*************************************************************************
|
||||||
|
*************************************************************************/
|
||||||
|
int lcd_getxy(void)
|
||||||
|
{
|
||||||
|
return lcd_waitbusy();
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*************************************************************************
|
||||||
|
Clear display and set cursor to home position
|
||||||
|
*************************************************************************/
|
||||||
|
void lcd_clrscr(void)
|
||||||
|
{
|
||||||
|
lcd_command(1<<LCD_CLR);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*************************************************************************
|
||||||
|
Set cursor to home position
|
||||||
|
*************************************************************************/
|
||||||
|
void lcd_home(void)
|
||||||
|
{
|
||||||
|
lcd_command(1<<LCD_HOME);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*************************************************************************
|
||||||
|
Display character at current cursor position
|
||||||
|
Input: character to be displayed
|
||||||
|
Returns: none
|
||||||
|
*************************************************************************/
|
||||||
|
void lcd_putc(char c)
|
||||||
|
{
|
||||||
|
uint8_t pos;
|
||||||
|
|
||||||
|
|
||||||
|
pos = lcd_waitbusy(); // read busy-flag and address counter
|
||||||
|
if (c=='\n')
|
||||||
|
{
|
||||||
|
lcd_newline(pos);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
#if LCD_WRAP_LINES==1
|
||||||
|
#if LCD_LINES==1
|
||||||
|
if ( pos == LCD_START_LINE1+LCD_DISP_LENGTH ) {
|
||||||
|
lcd_write((1<<LCD_DDRAM)+LCD_START_LINE1,0);
|
||||||
|
}
|
||||||
|
#elif LCD_LINES==2
|
||||||
|
if ( pos == LCD_START_LINE1+LCD_DISP_LENGTH ) {
|
||||||
|
lcd_write((1<<LCD_DDRAM)+LCD_START_LINE2,0);
|
||||||
|
}else if ( pos == LCD_START_LINE2+LCD_DISP_LENGTH ){
|
||||||
|
lcd_write((1<<LCD_DDRAM)+LCD_START_LINE1,0);
|
||||||
|
}
|
||||||
|
#elif LCD_LINES==4
|
||||||
|
if ( pos == LCD_START_LINE1+LCD_DISP_LENGTH ) {
|
||||||
|
lcd_write((1<<LCD_DDRAM)+LCD_START_LINE2,0);
|
||||||
|
}else if ( pos == LCD_START_LINE2+LCD_DISP_LENGTH ) {
|
||||||
|
lcd_write((1<<LCD_DDRAM)+LCD_START_LINE3,0);
|
||||||
|
}else if ( pos == LCD_START_LINE3+LCD_DISP_LENGTH ) {
|
||||||
|
lcd_write((1<<LCD_DDRAM)+LCD_START_LINE4,0);
|
||||||
|
}else if ( pos == LCD_START_LINE4+LCD_DISP_LENGTH ) {
|
||||||
|
lcd_write((1<<LCD_DDRAM)+LCD_START_LINE1,0);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
lcd_waitbusy();
|
||||||
|
#endif
|
||||||
|
lcd_write(c, 1);
|
||||||
|
}
|
||||||
|
|
||||||
|
}/* lcd_putc */
|
||||||
|
|
||||||
|
|
||||||
|
/*************************************************************************
|
||||||
|
Display string without auto linefeed
|
||||||
|
Input: string to be displayed
|
||||||
|
Returns: none
|
||||||
|
*************************************************************************/
|
||||||
|
void lcd_puts(const char *s)
|
||||||
|
/* print string on lcd (no auto linefeed) */
|
||||||
|
{
|
||||||
|
register char c;
|
||||||
|
|
||||||
|
while ( (c = *s++) ) {
|
||||||
|
lcd_putc(c);
|
||||||
|
}
|
||||||
|
|
||||||
|
}/* lcd_puts */
|
||||||
|
|
||||||
|
|
||||||
|
/*************************************************************************
|
||||||
|
Display string from program memory without auto linefeed
|
||||||
|
Input: string from program memory be be displayed
|
||||||
|
Returns: none
|
||||||
|
*************************************************************************/
|
||||||
|
void lcd_puts_p(const char *progmem_s)
|
||||||
|
/* print string from program memory on lcd (no auto linefeed) */
|
||||||
|
{
|
||||||
|
register char c;
|
||||||
|
|
||||||
|
while ( (c = pgm_read_byte(progmem_s++)) ) {
|
||||||
|
lcd_putc(c);
|
||||||
|
}
|
||||||
|
|
||||||
|
}/* lcd_puts_p */
|
||||||
|
|
||||||
|
|
||||||
|
/*************************************************************************
|
||||||
|
Initialize display and select type of cursor
|
||||||
|
Input: dispAttr LCD_DISP_OFF display off
|
||||||
|
LCD_DISP_ON display on, cursor off
|
||||||
|
LCD_DISP_ON_CURSOR display on, cursor on
|
||||||
|
LCD_DISP_CURSOR_BLINK display on, cursor on flashing
|
||||||
|
Returns: none
|
||||||
|
*************************************************************************/
|
||||||
|
void lcd_init(uint8_t dispAttr)
|
||||||
|
{
|
||||||
|
#if LCD_IO_MODE
|
||||||
|
/*
|
||||||
|
* Initialize LCD to 4 bit I/O mode
|
||||||
|
*/
|
||||||
|
|
||||||
|
if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT )
|
||||||
|
&& ( &LCD_RS_PORT == &LCD_DATA0_PORT) && ( &LCD_RW_PORT == &LCD_DATA0_PORT) && (&LCD_E_PORT == &LCD_DATA0_PORT)
|
||||||
|
&& (LCD_DATA0_PIN == 0 ) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)
|
||||||
|
&& (LCD_RS_PIN == 4 ) && (LCD_RW_PIN == 5) && (LCD_E_PIN == 6 ) )
|
||||||
|
{
|
||||||
|
/* configure all port bits as output (all LCD lines on same port) */
|
||||||
|
DDR(LCD_DATA0_PORT) |= 0x7F;
|
||||||
|
}
|
||||||
|
else if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT )
|
||||||
|
&& (LCD_DATA0_PIN == 0 ) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) )
|
||||||
|
{
|
||||||
|
/* configure all port bits as output (all LCD data lines on same port, but control lines on different ports) */
|
||||||
|
DDR(LCD_DATA0_PORT) |= 0x0F;
|
||||||
|
DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN);
|
||||||
|
DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN);
|
||||||
|
DDR(LCD_E_PORT) |= _BV(LCD_E_PIN);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
/* configure all port bits as output (LCD data and control lines on different ports */
|
||||||
|
DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN);
|
||||||
|
DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN);
|
||||||
|
DDR(LCD_E_PORT) |= _BV(LCD_E_PIN);
|
||||||
|
DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN);
|
||||||
|
DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN);
|
||||||
|
DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN);
|
||||||
|
DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN);
|
||||||
|
}
|
||||||
|
delay(LCD_DELAY_BOOTUP); /* wait 16ms or more after power-on */
|
||||||
|
|
||||||
|
/* initial write to lcd is 8bit */
|
||||||
|
LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); // LCD_FUNCTION>>4;
|
||||||
|
LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); // LCD_FUNCTION_8BIT>>4;
|
||||||
|
lcd_e_toggle();
|
||||||
|
delay(LCD_DELAY_INIT); /* delay, busy flag can't be checked here */
|
||||||
|
|
||||||
|
/* repeat last command */
|
||||||
|
lcd_e_toggle();
|
||||||
|
delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */
|
||||||
|
|
||||||
|
/* repeat last command a third time */
|
||||||
|
lcd_e_toggle();
|
||||||
|
delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */
|
||||||
|
|
||||||
|
/* now configure for 4bit mode */
|
||||||
|
LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); // LCD_FUNCTION_4BIT_1LINE>>4
|
||||||
|
lcd_e_toggle();
|
||||||
|
delay(LCD_DELAY_INIT_4BIT); /* some displays need this additional delay */
|
||||||
|
|
||||||
|
/* from now the LCD only accepts 4 bit I/O, we can use lcd_command() */
|
||||||
|
#else
|
||||||
|
/*
|
||||||
|
* Initialize LCD to 8 bit memory mapped mode
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* enable external SRAM (memory mapped lcd) and one wait state */
|
||||||
|
MCUCR = _BV(SRE) | _BV(SRW);
|
||||||
|
|
||||||
|
/* reset LCD */
|
||||||
|
delay(LCD_DELAY_BOOTUP); /* wait 16ms after power-on */
|
||||||
|
lcd_write(LCD_FUNCTION_8BIT_1LINE,0); /* function set: 8bit interface */
|
||||||
|
delay(LCD_DELAY_INIT); /* wait 5ms */
|
||||||
|
lcd_write(LCD_FUNCTION_8BIT_1LINE,0); /* function set: 8bit interface */
|
||||||
|
delay(LCD_DELAY_INIT_REP); /* wait 64us */
|
||||||
|
lcd_write(LCD_FUNCTION_8BIT_1LINE,0); /* function set: 8bit interface */
|
||||||
|
delay(LCD_DELAY_INIT_REP); /* wait 64us */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if KS0073_4LINES_MODE
|
||||||
|
/* Display with KS0073 controller requires special commands for enabling 4 line mode */
|
||||||
|
lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_ON);
|
||||||
|
lcd_command(KS0073_4LINES_MODE);
|
||||||
|
lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_OFF);
|
||||||
|
#else
|
||||||
|
lcd_command(LCD_FUNCTION_DEFAULT); /* function set: display lines */
|
||||||
|
#endif
|
||||||
|
lcd_command(LCD_DISP_OFF); /* display off */
|
||||||
|
lcd_clrscr(); /* display clear */
|
||||||
|
lcd_command(LCD_MODE_DEFAULT); /* set entry mode */
|
||||||
|
lcd_command(dispAttr); /* display/cursor control */
|
||||||
|
|
||||||
|
}/* lcd_init */
|
||||||
|
|
||||||
|
|
@ -0,0 +1,371 @@
|
||||||
|
#ifndef LCD_H
|
||||||
|
#define LCD_H
|
||||||
|
/*************************************************************************
|
||||||
|
Title : C include file for the HD44780U LCD library (lcd.c)
|
||||||
|
Author: Peter Fleury <pfleury@gmx.ch> http://tinyurl.com/peterfleury
|
||||||
|
License: GNU General Public License Version 3
|
||||||
|
File: $Id: lcd.h,v 1.14.2.4 2015/01/20 17:16:07 peter Exp $
|
||||||
|
Software: AVR-GCC 4.x
|
||||||
|
Hardware: any AVR device, memory mapped mode only for AVR with
|
||||||
|
memory mapped interface (AT90S8515/ATmega8515/ATmega128)
|
||||||
|
***************************************************************************/
|
||||||
|
|
||||||
|
/**
|
||||||
|
@mainpage
|
||||||
|
Collection of libraries for AVR-GCC
|
||||||
|
@author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury
|
||||||
|
@copyright (C) 2015 Peter Fleury, GNU General Public License Version 3
|
||||||
|
|
||||||
|
@file
|
||||||
|
@defgroup pfleury_lcd LCD library <lcd.h>
|
||||||
|
@code #include <lcd.h> @endcode
|
||||||
|
|
||||||
|
@brief Basic routines for interfacing a HD44780U-based character LCD display
|
||||||
|
|
||||||
|
LCD character displays can be found in many devices, like espresso machines, laser printers.
|
||||||
|
The Hitachi HD44780 controller and its compatible controllers like Samsung KS0066U have become an industry standard for these types of displays.
|
||||||
|
|
||||||
|
This library allows easy interfacing with a HD44780 compatible display and can be
|
||||||
|
operated in memory mapped mode (LCD_IO_MODE defined as 0 in the include file lcd.h.) or in
|
||||||
|
4-bit IO port mode (LCD_IO_MODE defined as 1). 8-bit IO port mode is not supported.
|
||||||
|
|
||||||
|
Memory mapped mode is compatible with old Kanda STK200 starter kit, but also supports
|
||||||
|
generation of R/W signal through A8 address line.
|
||||||
|
|
||||||
|
@see The chapter <a href=" http://homepage.hispeed.ch/peterfleury/avr-lcd44780.html" target="_blank">Interfacing a HD44780 Based LCD to an AVR</a>
|
||||||
|
on my home page, which shows example circuits how to connect an LCD to an AVR controller.
|
||||||
|
|
||||||
|
@author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury
|
||||||
|
|
||||||
|
@version 2.0
|
||||||
|
|
||||||
|
@copyright (C) 2015 Peter Fleury, GNU General Public License Version 3
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <inttypes.h>
|
||||||
|
#include <avr/pgmspace.h>
|
||||||
|
|
||||||
|
#if (__GNUC__ * 100 + __GNUC_MINOR__) < 405
|
||||||
|
#error "This library requires AVR-GCC 4.5 or later, update to newer AVR-GCC compiler !"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
/**@{*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* LCD and target specific definitions below can be defined in a separate include file with name lcd_definitions.h instead modifying this file
|
||||||
|
* by adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile
|
||||||
|
* All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
|
||||||
|
*/
|
||||||
|
#ifdef _LCD_DEFINITIONS_FILE
|
||||||
|
#include "lcd_definitions.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name Definition for LCD controller type
|
||||||
|
* Use 0 for HD44780 controller, change to 1 for displays with KS0073 controller.
|
||||||
|
*/
|
||||||
|
#ifndef LCD_CONTROLLER_KS0073
|
||||||
|
#define LCD_CONTROLLER_KS0073 0 /**< Use 0 for HD44780 controller, 1 for KS0073 controller */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name Definitions for Display Size
|
||||||
|
* Change these definitions to adapt setting to your display
|
||||||
|
*
|
||||||
|
* These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
|
||||||
|
* adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile.
|
||||||
|
* All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#ifndef LCD_LINES
|
||||||
|
#define LCD_LINES 2 /**< number of visible lines of the display */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_DISP_LENGTH
|
||||||
|
#define LCD_DISP_LENGTH 16 /**< visibles characters per line of the display */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_LINE_LENGTH
|
||||||
|
#define LCD_LINE_LENGTH 0x40 /**< internal line length of the display */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_START_LINE1
|
||||||
|
#define LCD_START_LINE1 0x00 /**< DDRAM address of first char of line 1 */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_START_LINE2
|
||||||
|
#define LCD_START_LINE2 0x40 /**< DDRAM address of first char of line 2 */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_START_LINE3
|
||||||
|
#define LCD_START_LINE3 0x14 /**< DDRAM address of first char of line 3 */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_START_LINE4
|
||||||
|
#define LCD_START_LINE4 0x54 /**< DDRAM address of first char of line 4 */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_WRAP_LINES
|
||||||
|
#define LCD_WRAP_LINES 0 /**< 0: no wrap, 1: wrap at end of visibile line */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name Definitions for 4-bit IO mode
|
||||||
|
*
|
||||||
|
* The four LCD data lines and the three control lines RS, RW, E can be on the
|
||||||
|
* same port or on different ports.
|
||||||
|
* Change LCD_RS_PORT, LCD_RW_PORT, LCD_E_PORT if you want the control lines on
|
||||||
|
* different ports.
|
||||||
|
*
|
||||||
|
* Normally the four data lines should be mapped to bit 0..3 on one port, but it
|
||||||
|
* is possible to connect these data lines in different order or even on different
|
||||||
|
* ports by adapting the LCD_DATAx_PORT and LCD_DATAx_PIN definitions.
|
||||||
|
*
|
||||||
|
* Adjust these definitions to your target.\n
|
||||||
|
* These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
|
||||||
|
* adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile.
|
||||||
|
* All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#define LCD_IO_MODE 1 /**< 0: memory mapped mode, 1: IO port mode */
|
||||||
|
|
||||||
|
#if LCD_IO_MODE
|
||||||
|
|
||||||
|
#ifndef LCD_PORT
|
||||||
|
#define LCD_PORT PORTA /**< port for the LCD lines */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_DATA0_PORT
|
||||||
|
#define LCD_DATA0_PORT LCD_PORT /**< port for 4bit data bit 0 */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_DATA1_PORT
|
||||||
|
#define LCD_DATA1_PORT LCD_PORT /**< port for 4bit data bit 1 */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_DATA2_PORT
|
||||||
|
#define LCD_DATA2_PORT LCD_PORT /**< port for 4bit data bit 2 */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_DATA3_PORT
|
||||||
|
#define LCD_DATA3_PORT LCD_PORT /**< port for 4bit data bit 3 */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_DATA0_PIN
|
||||||
|
#define LCD_DATA0_PIN 4 /**< pin for 4bit data bit 0 */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_DATA1_PIN
|
||||||
|
#define LCD_DATA1_PIN 5 /**< pin for 4bit data bit 1 */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_DATA2_PIN
|
||||||
|
#define LCD_DATA2_PIN 6 /**< pin for 4bit data bit 2 */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_DATA3_PIN
|
||||||
|
#define LCD_DATA3_PIN 7 /**< pin for 4bit data bit 3 */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_RS_PORT
|
||||||
|
#define LCD_RS_PORT LCD_PORT /**< port for RS line */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_RS_PIN
|
||||||
|
#define LCD_RS_PIN 3 /**< pin for RS line */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_RW_PORT
|
||||||
|
#define LCD_RW_PORT LCD_PORT /**< port for RW line */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_RW_PIN
|
||||||
|
#define LCD_RW_PIN 2 /**< pin for RW line */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_E_PORT
|
||||||
|
#define LCD_E_PORT LCD_PORT /**< port for Enable line */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_E_PIN
|
||||||
|
#define LCD_E_PIN 1 /**< pin for Enable line */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || \
|
||||||
|
defined(__AVR_ATmega8515__)|| defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || \
|
||||||
|
defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__)
|
||||||
|
/*
|
||||||
|
* memory mapped mode is only supported when the device has an external data memory interface
|
||||||
|
*/
|
||||||
|
#define LCD_IO_DATA 0xC000 /* A15=E=1, A14=RS=1 */
|
||||||
|
#define LCD_IO_FUNCTION 0x8000 /* A15=E=1, A14=RS=0 */
|
||||||
|
#define LCD_IO_READ 0x0100 /* A8 =R/W=1 (R/W: 1=Read, 0=Write */
|
||||||
|
|
||||||
|
#else
|
||||||
|
#error "external data memory interface not available for this device, use 4-bit IO port mode"
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name Definitions of delays
|
||||||
|
* Used to calculate delay timers.
|
||||||
|
* Adapt the F_CPU define in the Makefile to the clock frequency in Hz of your target
|
||||||
|
*
|
||||||
|
* These delay times can be adjusted, if some displays require different delays.\n
|
||||||
|
* These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
|
||||||
|
* adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile.
|
||||||
|
* All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
|
||||||
|
*/
|
||||||
|
#ifndef LCD_DELAY_BOOTUP
|
||||||
|
#define LCD_DELAY_BOOTUP 16000 /**< delay in micro seconds after power-on */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_DELAY_INIT
|
||||||
|
#define LCD_DELAY_INIT 5000 /**< delay in micro seconds after initialization command sent */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_DELAY_INIT_REP
|
||||||
|
#define LCD_DELAY_INIT_REP 64 /**< delay in micro seconds after initialization command repeated */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_DELAY_INIT_4BIT
|
||||||
|
#define LCD_DELAY_INIT_4BIT 64 /**< delay in micro seconds after setting 4-bit mode */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_DELAY_BUSY_FLAG
|
||||||
|
#define LCD_DELAY_BUSY_FLAG 4 /**< time in micro seconds the address counter is updated after busy flag is cleared */
|
||||||
|
#endif
|
||||||
|
#ifndef LCD_DELAY_ENABLE_PULSE
|
||||||
|
#define LCD_DELAY_ENABLE_PULSE 1 /**< enable signal pulse width in micro seconds */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name Definitions for LCD command instructions
|
||||||
|
* The constants define the various LCD controller instructions which can be passed to the
|
||||||
|
* function lcd_command(), see HD44780 data sheet for a complete description.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* instruction register bit positions, see HD44780U data sheet */
|
||||||
|
#define LCD_CLR 0 /* DB0: clear display */
|
||||||
|
#define LCD_HOME 1 /* DB1: return to home position */
|
||||||
|
#define LCD_ENTRY_MODE 2 /* DB2: set entry mode */
|
||||||
|
#define LCD_ENTRY_INC 1 /* DB1: 1=increment, 0=decrement */
|
||||||
|
#define LCD_ENTRY_SHIFT 0 /* DB2: 1=display shift on */
|
||||||
|
#define LCD_ON 3 /* DB3: turn lcd/cursor on */
|
||||||
|
#define LCD_ON_DISPLAY 2 /* DB2: turn display on */
|
||||||
|
#define LCD_ON_CURSOR 1 /* DB1: turn cursor on */
|
||||||
|
#define LCD_ON_BLINK 0 /* DB0: blinking cursor ? */
|
||||||
|
#define LCD_MOVE 4 /* DB4: move cursor/display */
|
||||||
|
#define LCD_MOVE_DISP 3 /* DB3: move display (0-> cursor) ? */
|
||||||
|
#define LCD_MOVE_RIGHT 2 /* DB2: move right (0-> left) ? */
|
||||||
|
#define LCD_FUNCTION 5 /* DB5: function set */
|
||||||
|
#define LCD_FUNCTION_8BIT 4 /* DB4: set 8BIT mode (0->4BIT mode) */
|
||||||
|
#define LCD_FUNCTION_2LINES 3 /* DB3: two lines (0->one line) */
|
||||||
|
#define LCD_FUNCTION_10DOTS 2 /* DB2: 5x10 font (0->5x7 font) */
|
||||||
|
#define LCD_CGRAM 6 /* DB6: set CG RAM address */
|
||||||
|
#define LCD_DDRAM 7 /* DB7: set DD RAM address */
|
||||||
|
#define LCD_BUSY 7 /* DB7: LCD is busy */
|
||||||
|
|
||||||
|
/* set entry mode: display shift on/off, dec/inc cursor move direction */
|
||||||
|
#define LCD_ENTRY_DEC 0x04 /* display shift off, dec cursor move dir */
|
||||||
|
#define LCD_ENTRY_DEC_SHIFT 0x05 /* display shift on, dec cursor move dir */
|
||||||
|
#define LCD_ENTRY_INC_ 0x06 /* display shift off, inc cursor move dir */
|
||||||
|
#define LCD_ENTRY_INC_SHIFT 0x07 /* display shift on, inc cursor move dir */
|
||||||
|
|
||||||
|
/* display on/off, cursor on/off, blinking char at cursor position */
|
||||||
|
#define LCD_DISP_OFF 0x08 /* display off */
|
||||||
|
#define LCD_DISP_ON 0x0C /* display on, cursor off */
|
||||||
|
#define LCD_DISP_ON_BLINK 0x0D /* display on, cursor off, blink char */
|
||||||
|
#define LCD_DISP_ON_CURSOR 0x0E /* display on, cursor on */
|
||||||
|
#define LCD_DISP_ON_CURSOR_BLINK 0x0F /* display on, cursor on, blink char */
|
||||||
|
|
||||||
|
/* move cursor/shift display */
|
||||||
|
#define LCD_MOVE_CURSOR_LEFT 0x10 /* move cursor left (decrement) */
|
||||||
|
#define LCD_MOVE_CURSOR_RIGHT 0x14 /* move cursor right (increment) */
|
||||||
|
#define LCD_MOVE_DISP_LEFT 0x18 /* shift display left */
|
||||||
|
#define LCD_MOVE_DISP_RIGHT 0x1C /* shift display right */
|
||||||
|
|
||||||
|
/* function set: set interface data length and number of display lines */
|
||||||
|
#define LCD_FUNCTION_4BIT_1LINE 0x20 /* 4-bit interface, single line, 5x7 dots */
|
||||||
|
#define LCD_FUNCTION_4BIT_2LINES 0x28 /* 4-bit interface, dual line, 5x7 dots */
|
||||||
|
#define LCD_FUNCTION_8BIT_1LINE 0x30 /* 8-bit interface, single line, 5x7 dots */
|
||||||
|
#define LCD_FUNCTION_8BIT_2LINES 0x38 /* 8-bit interface, dual line, 5x7 dots */
|
||||||
|
|
||||||
|
|
||||||
|
#define LCD_MODE_DEFAULT ((1<<LCD_ENTRY_MODE) | (1<<LCD_ENTRY_INC) )
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @name Functions
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
@brief Initialize display and select type of cursor
|
||||||
|
@param dispAttr \b LCD_DISP_OFF display off\n
|
||||||
|
\b LCD_DISP_ON display on, cursor off\n
|
||||||
|
\b LCD_DISP_ON_CURSOR display on, cursor on\n
|
||||||
|
\b LCD_DISP_ON_CURSOR_BLINK display on, cursor on flashing
|
||||||
|
@return none
|
||||||
|
*/
|
||||||
|
extern void lcd_init(uint8_t dispAttr);
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
@brief Clear display and set cursor to home position
|
||||||
|
@return none
|
||||||
|
*/
|
||||||
|
extern void lcd_clrscr(void);
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
@brief Set cursor to home position
|
||||||
|
@return none
|
||||||
|
*/
|
||||||
|
extern void lcd_home(void);
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
@brief Set cursor to specified position
|
||||||
|
|
||||||
|
@param x horizontal position\n (0: left most position)
|
||||||
|
@param y vertical position\n (0: first line)
|
||||||
|
@return none
|
||||||
|
*/
|
||||||
|
extern void lcd_gotoxy(uint8_t x, uint8_t y);
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
@brief Display character at current cursor position
|
||||||
|
@param c character to be displayed
|
||||||
|
@return none
|
||||||
|
*/
|
||||||
|
extern void lcd_putc(char c);
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
@brief Display string without auto linefeed
|
||||||
|
@param s string to be displayed
|
||||||
|
@return none
|
||||||
|
*/
|
||||||
|
extern void lcd_puts(const char *s);
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
@brief Display string from program memory without auto linefeed
|
||||||
|
@param progmem_s string from program memory be be displayed
|
||||||
|
@return none
|
||||||
|
@see lcd_puts_P
|
||||||
|
*/
|
||||||
|
extern void lcd_puts_p(const char *progmem_s);
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
@brief Send LCD controller instruction command
|
||||||
|
@param cmd instruction to send to LCD controller, see HD44780 data sheet
|
||||||
|
@return none
|
||||||
|
*/
|
||||||
|
extern void lcd_command(uint8_t cmd);
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
@brief Send data byte to LCD controller
|
||||||
|
|
||||||
|
Similar to lcd_putc(), but without interpreting LF
|
||||||
|
@param data byte to send to LCD controller, see HD44780 data sheet
|
||||||
|
@return none
|
||||||
|
*/
|
||||||
|
extern void lcd_data(uint8_t data);
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
@brief macros for automatically storing string constant in program memory
|
||||||
|
*/
|
||||||
|
#define lcd_puts_P(__s) lcd_puts_p(PSTR(__s))
|
||||||
|
|
||||||
|
/**@}*/
|
||||||
|
|
||||||
|
#endif //LCD_H
|
||||||
|
|
||||||
|
|
@ -1187,6 +1187,10 @@ void backlight_set(uint8_t level) {}
|
||||||
|
|
||||||
#endif // backlight
|
#endif // backlight
|
||||||
|
|
||||||
|
#ifdef HD44780_ENABLED
|
||||||
|
#include "hd44780.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
// Functions for spitting out values
|
// Functions for spitting out values
|
||||||
//
|
//
|
||||||
|
|
|
||||||
|
|
@ -121,6 +121,10 @@ extern uint32_t default_layer_state;
|
||||||
#include "process_terminal_nop.h"
|
#include "process_terminal_nop.h"
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#ifdef HD44780_ENABLE
|
||||||
|
#include "hd44780.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
#define STRINGIZE(z) #z
|
#define STRINGIZE(z) #z
|
||||||
#define ADD_SLASH_X(y) STRINGIZE(\x ## y)
|
#define ADD_SLASH_X(y) STRINGIZE(\x ## y)
|
||||||
#define SYMBOL_STR(x) ADD_SLASH_X(x)
|
#define SYMBOL_STR(x) ADD_SLASH_X(x)
|
||||||
|
|
|
||||||
|
|
@ -187,4 +187,32 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
|
/*
|
||||||
|
* HD44780 LCD Display Configuration
|
||||||
|
*/
|
||||||
|
/*
|
||||||
|
#define LCD_LINES 2 //< number of visible lines of the display
|
||||||
|
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
||||||
|
|
||||||
|
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
||||||
|
|
||||||
|
#if LCD_IO_MODE
|
||||||
|
#define LCD_PORT PORTB //< port for the LCD lines
|
||||||
|
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
||||||
|
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
||||||
|
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
||||||
|
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
||||||
|
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
||||||
|
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
||||||
|
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
||||||
|
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
||||||
|
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
||||||
|
#define LCD_RS_PIN 3 //< pin for RS line
|
||||||
|
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
||||||
|
#define LCD_RW_PIN 2 //< pin for RW line
|
||||||
|
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
||||||
|
#define LCD_E_PIN 1 //< pin for Enable line
|
||||||
|
#endif
|
||||||
|
*/
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
|
||||||
|
|
@ -66,3 +66,4 @@ UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
||||||
|
|
|
||||||
|
|
@ -69,6 +69,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
#ifdef MIDI_ENABLE
|
#ifdef MIDI_ENABLE
|
||||||
# include "process_midi.h"
|
# include "process_midi.h"
|
||||||
#endif
|
#endif
|
||||||
|
#ifdef HD44780_ENABLE
|
||||||
|
# include "hd44780.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
#ifdef MATRIX_HAS_GHOST
|
#ifdef MATRIX_HAS_GHOST
|
||||||
extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
|
extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue