1
0
Fork 0

Added Espynn's keymap

This commit is contained in:
folkert4 2017-01-27 13:51:39 -05:00
parent a28f689387
commit 8c794d73fa
5 changed files with 503 additions and 0 deletions

View File

@ -0,0 +1,63 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# Build Options
# change to "no" to disable the options, or define them in the makefile.mk in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

Binary file not shown.

After

Width:  |  Height:  |  Size: 52 KiB

View File

@ -0,0 +1,151 @@
#include "planck.h"
#include "action_layer.h"
#include "eeconfig.h"
#ifdef BACKLIGHT_ENABLE
#include "backlight.h"
#endif
#define PREVENT_STUCK_MODIFIERS
extern keymap_config_t keymap_config;
// Symbolic names for macro IDs.
#define _QWERTY 0 // QUERTY layer
#define _LOWER 1 // Lower layer
#define _RAISE 2 // Raise layer
#define _CUSTOM 3 // Custom layer (LOWER + RAISE)
#define _BL 4 // Backlight
#define _CUS0 5 // Mobile#
#define _CUS1 6 // signature
#define _CUS2 7 // macro 2
#define _CUS3 8 // macro 3
#define _CUS4 9 // macro 4
#define _CUS5 10 // email
#define _COPY 11 // copy
#define _PASTE 12 // paste
#define _CUT 13 // cut
// Macro shortcuts.
#define QWERTY M(_LOWER)
#define LOWER M(_LOWER)
#define RAISE M(_RAISE)
#define CUSTOM M(_CUSTOM)
#define BL M(_BL)
#define CUS0 M(_CUS0)
#define CUS1 M(_CUS1)
#define CUS2 M(_CUS2)
#define CUS3 M(_CUS3)
#define CUS4 M(_CUS4)
#define CUS5 M(_CUS5)
#define COPY M(_COPY)
#define PASTE M(_PASTE)
#define CUT M(_CUT)
// Func macro definitions.
#define LWR_PGDN FUNC(0) // Tap for PgDn, hold for LOWER
#define RSE_PGUP FUNC(1) // Tap for PgUp, hold for RAISE
#define CTL_CAPS FUNC(2) // Tap for Caps, hold for Ctrl (DOESN'T SEEM TO WORK)
#define SFT_ENT FUNC(3) // Tap for Enter, hold for Shift
#define ZM_NRM FUNC(4) // Zoom normal
#define ZM_IN FUNC(5) // Zoom out
#define ZM_OUT FUNC(6) // Zoom in
// Enable these functions using FUNC(n) macro.
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_PGDN),
[1] = ACTION_LAYER_TAP_KEY(_RAISE, KC_PGUP),
[2] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_CAPS),
[3] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
[4] = ACTION_MODS_KEY(MOD_LCTL, KC_0),
[5] = ACTION_MODS_KEY(MOD_LCTL, KC_MINS),
[6] = ACTION_MODS_KEY(MOD_LCTL, KC_PLUS),
[7] = ACTION_MODS_KEY(MOD_LCTL, KC_UNDS),
};
// This config can be found at Keyboard layout editor site: http://goo.gl/zjXL2l
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = { /* QWERTY */
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
{KC_DEL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT},
{KC_LCTL, KC_ESC, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
},
[_LOWER] = { /* LOWER */
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LPRN, KC_RPRN, KC_LCBR, KC_RCBR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT, KC_DQT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, ZM_NRM, ZM_IN, ZM_OUT, KC_TRNS, KC_PGDN, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
},
[_RAISE] = { /* RAISE */
{KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_LCBR, KC_BSLS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_GRV, KC_TILD, KC_LBRC, KC_LBRC, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
[_CUSTOM] = { /* CUSTOM */
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS4, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS0, CUS3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, CUT, COPY, PASTE, CUS1, CUS5, CUS2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{BL, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
}
};
// Set a layer persistantly.
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
// Macro actions for each corresponding ID.
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
case _RAISE: // Raised layer.
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _CUSTOM);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _CUSTOM);
}
break;
case _LOWER: // Lowered layer.
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _CUSTOM);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _CUSTOM);
}
break;
case _BL: // Backlight
if (record->event.pressed) {
register_code(KC_RSFT);
#ifdef BACKLIGHT_ENABLE
backlight_step();
#endif
} else {
unregister_code(KC_RSFT);
}
break;
case _CUS0: // enter your mobile# here
return MACRODOWN(T(9), T(9), T(9), T(MINS),T(9), T(9), T(9), T(MINS),T(9), T(9), T(9), T(9),END);
case _CUS1: // signature line for email
return MACRODOWN(T(ENT), T(ENT), T(MINS), T(J), T(W), END);
case _CUS2: // Custom macro 2
return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_L), UP(KC_LSFT), END );
case _CUS3: // custom macro 3
return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_F), UP(KC_LSFT), END );
case _CUS4: // custom macro 4
return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_I), UP(KC_LSFT), END );
case _CUS5: // Enter your email here
return MACRODOWN( TYPE(KC_F),
DOWN(KC_LSFT), TYPE(KC_2), UP(KC_LSFT),
TYPE(KC_G), TYPE(KC_M), TYPE(KC_A), TYPE(KC_I), TYPE(KC_L), TYPE(KC_DOT), TYPE(KC_C), TYPE(KC_O), TYPE(KC_M), END );
case _CUT: //cut macro
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_X), UP(KC_LCTL), END );
case _COPY: // copy macro
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_C), UP(KC_LCTL), END );
case _PASTE: // paste macro
return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_V), UP(KC_LCTL), END );
};
return MACRO_NONE;
}

View File

@ -0,0 +1,271 @@
[
{
"backcolor": "#858585",
"name": "Planck 40%",
"author": "James Folkert",
"background": {
"name": "Aluminium brushed",
"style": "background-image: url('/bg/metal/aluminum_texture1642.jpg');"
},
"switchMount": "cherry",
"switchBrand": "cherry",
"switchType": "MX1A-A1xx",
"pcb": true,
"plate": true
},
[
{
"fa": [
2,
2,
0,
2
]
},
"F1\n1\n\n!\n\n\n\n\n\n<i class='kb kb-Tab-2'></i>",
"F2\n2\n\n@\n\n\n\n\n\nQ",
"F3\n3\n\n#\n\n\n\n\n\nW",
"F4\n4\n\n$\n\n\n\n\n\nE",
"F5\n5\n\n%\n\n\n\n\n\nR",
"F6\n6\n\n^\n\n\n\n\n\nT",
"F7\n6\n\n&\n\n\n\n\n\nY",
"F8\n8\n\n*\nMacro4\n\n\n\n\nU",
"F9\n9\n\n(\n\n\n\n\n\nI",
{
"fa": [
0,
0,
0,
2
]
},
"F10\n0\n\n)\n\n\n\n\n\nO",
{
"fa": [
2,
2,
0,
2
]
},
"F11\n-\n\n_\n\n\n\n\n\nP",
"F12\n=\n\n+\n\n\n\n\n\n<i class='kb kb-Unicode-BackSpace-DeleteLeft-Big'></i>"
],
[
{
"a": 7,
"f": 3
},
"<i class='mss mss-Unicode-DeleteRight-Big-2'></i>",
{
"f": 3
},
"A",
{
"f": 3
},
"S",
{
"f": 3
},
"D",
{
"t": "#ff0000",
"a": 4,
"f": 3
},
"\n(\n\n\n\n\n\n\n\nF",
{
"t": "#000000",
"f": 3
},
"\n)\n\n\n\n\n\n\n\nG",
{
"f": 3
},
"\n{\n\n\nMacro0\n\n\n\n\nH",
{
"t": "#ff0000",
"f": 3
},
"\n}\n\n\nMacro3\n\n\n\n\nJ",
{
"t": "#000000",
"f": 3
},
"{\n\n\n\n\n\n\n\n\nK",
{
"f": 3
},
"{\n\n\n\n\n\n\n\n\nL",
{
"fa": [
2,
2,
2,
2,
0,
0,
0,
2
]
},
"\\\n\n|\n\n\n\n\n:\n\n;",
{
"a": 7,
"fa": [
9
]
},
"<i class='mss mss-Unicode-Enter-3'></i>"
],
[
{
"f": 3
},
"Shift",
{
"f": 3
},
"Z",
{
"f": 3
},
"X\n\n\n\nCut",
{
"f": 3
},
"C\n\n\n\nCopy",
{
"a": 4,
"fa": [
2,
2,
2,
2
]
},
"\\\n[\n|\n{\nPaste\n\n\n\n\nV",
"|\n]\n\n}\nMacro1\n\n\n\n\nB",
"`\n'\n~\n\"\nMacro5\n\n\n\n\nN",
"~\n\"\n\n\nMacro2\n\n\n\n\nM",
{
"fa": [
2,
2,
2,
2,
0,
0,
0,
1
]
},
"[\n\n{\n\n\n\n\n<\n\n,",
"[\n\n{\n\n\n\n\n\n\n.",
{
"a": 6
},
"\n\n?\n\n\n\n\n\n/",
{
"a": 4,
"fa": [
2,
2,
2,
0,
0,
0,
0,
1,
9,
0
]
},
"\n\n\n<i class='kb kb-Arrows-Bottom-4'></i>Shift\n\n\n\n\n<i class='mss mss-Unicode-Enter-3'></i>\n\n<i class='kb kb-Arrows-Bottom-4'></i>Shift"
],
[
{
"a": 7,
"f": 3
},
"Ctrl\n\n\n\nBLight",
{
"a": 4,
"fa": [
2,
1,
2,
0,
0,
0,
0,
1,
9,
9
]
},
"\nZNorm\n\n\nRESET\n\n\n\n\n<i class='mss mss-Unicode-Escape-3'></i>",
{
"fa": [
2,
1,
2,
0,
0,
0,
0,
1,
9,
6
]
},
"\nZIn\n\n\n\n\n\n\n\n<i class='kb kb-logo-windows-8'></i>",
{
"fa": [
2,
1,
2,
0,
0,
0,
0,
1,
9,
9
]
},
"\nZOut\n\n\n\n\n\n\n\n<i class='kb kb-Unicode-Alternate-1'></i>",
{
"a": 7,
"fa": [
9
]
},
"&dArr;",
{
"a": 4,
"fa": [
9,
5,
5
],
"w": 2
},
"\n<i class='kb kb-Unicode-Page-Down-3'></i>\n<i class='kb kb-Unicode-Page-Up-3'></i>",
{
"a": 7
},
"&uArr;",
{
"a": 4,
"fa": [
2
]
},
"<i class='kb kb-Multimedia-FastForward-End'></i>\n\n\n\n\n\n\n\n\n&larr;",
"<i class='kb kb-Multimedia-Volume-Down-1'></i>\n\n\n\n\n\n\n\n\n&darr;",
"<i class='kb kb-Multimedia-Volume-Up-1'></i>\n\n\n\n\n\n\n\n\n&uarr;",
"<i class='kb kb-Multimedia-Play-Pause'></i>\n\n\n\n\n\n\n\n\n&rarr;"
]
]

View File

@ -0,0 +1,18 @@
# Espynn's keymap for Planck Ortholinear 40% Mechanical Keyboard
Created by James Folkert: https://twitter.com/trekloFsemaJ
Added several custom functions to the keymap from the "ab" map. Special thanks to "mollat" for demonstration of macros in their keymap.c
![Layout](keyboard-layout.png "Practical Keymap")
* Online keyboard layout editor: http://www.keyboard-layout-editor.com/
* [JSON of raw layout] (layout.json "JSON of raw layout")
# Notes
* Simultaneous RAISE+LOWER enters CUSTOM layer. Several custom keymaps are here
* I disregarded the advice of Jack and used macros for passwords. I accept my fate. These have been abstracted to macros 2, 3, and 4
* add your mobile and email to the keymap before make
* RAISE and LOWER also acts as PgUp and PgDn when tapped.
* [CapsLock] also acts as [Ctrl] key when you press and hold. It is convenient for GNU Emacs users. (not sure if this works)
* Bracket/ paran/ brace keys are placed in the center of the keyboard for programmer's convenience.