initial commit for the AMJ60 PCB
This commit is contained in:
Toni
parent
8144ce8852
commit
387bd772e1
|
|
@ -0,0 +1,70 @@
|
|||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../Makefile
|
||||
endif
|
||||
|
|
@ -0,0 +1,30 @@
|
|||
#include "amj60.h"
|
||||
#include "led.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user();
|
||||
led_init_ports();
|
||||
};
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
matrix_scan_user();
|
||||
};
|
||||
|
||||
void led_init_ports(void) {
|
||||
// * Set our LED pins as output
|
||||
DDRB |= (1<<2);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// Turn capslock on
|
||||
PORTB &= ~(1<<2);
|
||||
} else {
|
||||
// Turn capslock off
|
||||
PORTB |= (1<<2);
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,153 @@
|
|||
#ifndef AMJ60_H
|
||||
#define AMJ60_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
// readability
|
||||
#define XXX KC_NO
|
||||
|
||||
/* AMJ60 layout to the best of my knowledge matrix layout
|
||||
* ,-----------------------------------------------------------.
|
||||
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49|
|
||||
* |-----------------------------------------------------------|
|
||||
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3c | 3d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49,\
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
|
||||
k40, k41, k42, k45, k4a, k4b, k4c, k4d \
|
||||
) \
|
||||
{ \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
|
||||
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
|
||||
{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d} \
|
||||
}
|
||||
|
||||
/*
|
||||
* ANSI
|
||||
* ,-----------------------------------------------------------.
|
||||
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
#define KEYMAP_ANSI( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \
|
||||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \
|
||||
k40, k41, k42, k45, k4a, k4b, k4c, k4d \
|
||||
) \
|
||||
{ \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
|
||||
{k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \
|
||||
{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \
|
||||
}
|
||||
|
||||
/* AMJ60 HHKB matrix layout
|
||||
* ,------------------------------------------------------------.
|
||||
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49 |
|
||||
* |------------------------------------------------------------|
|
||||
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
|
||||
* |------------------------------------------------------------|
|
||||
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d |
|
||||
* |------------------------------------------------------------|
|
||||
* | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c |
|
||||
* |------------------------------------------------------------|
|
||||
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d |
|
||||
* `------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
#define KEYMAP_HHKB( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \
|
||||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
|
||||
k40, k41, k42, k45, k4a, k4b, k4c, k4d \
|
||||
) \
|
||||
{ \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
|
||||
{k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
|
||||
{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d} \
|
||||
}
|
||||
|
||||
/* ISO
|
||||
* ,-----------------------------------------------------------.
|
||||
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
#define KEYMAP_ISO( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \
|
||||
k40, k41, k42, k45, k4a, k4b, k4c, k4d \
|
||||
) \
|
||||
{ \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
|
||||
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \
|
||||
{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \
|
||||
}
|
||||
/* ISO w/ split right shift key matrix layout
|
||||
* ,-----------------------------------------------------------.
|
||||
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c |
|
||||
* |-----------------------------------------------------------|
|
||||
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
#define KEYMAP_ISO_SPLITRSHIFT( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
|
||||
k40, k41, k42, k45, k4a, k4b, k4c, k4d \
|
||||
) \
|
||||
{ \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
|
||||
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
|
||||
{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \
|
||||
}
|
||||
|
||||
void matrix_init_user(void);
|
||||
void matrix_scan_user(void);
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,94 @@
|
|||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6066
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Han Chen
|
||||
#define PRODUCT AMJ60
|
||||
#define DESCRIPTION qmk port of AMJ60 PCB
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 14
|
||||
|
||||
// ROWS: Top to bottom, COLS: Left to right
|
||||
|
||||
#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5}
|
||||
#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7, D6, B3}
|
||||
#define UNUSED_PINS
|
||||
|
||||
#define BACKLIGHT_PIN B6
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* Backlight configuration
|
||||
*/
|
||||
#define BACKLIGHT_LEVELS 4
|
||||
|
||||
/* Underlight configuration
|
||||
*/
|
||||
|
||||
#define RGB_DI_PIN E2
|
||||
#define RGBLIGHT_TIMER
|
||||
#define RGBLED_NUM 8 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,23 @@
|
|||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
#!/bin/bash
|
||||
# adjust for cpu
|
||||
# -j 16 gave best result on a hyperthreaded quad core core i7
|
||||
|
||||
LIMIT=10
|
||||
THREADS="-j 16"
|
||||
KMAP=iso_split_rshift
|
||||
|
||||
echo "We need sudo later"
|
||||
sudo ls 2>&1 /dev/null
|
||||
|
||||
function wait_bootloader {
|
||||
echo "Waiting for Bootloader..."
|
||||
local STARTTIME=$(date +"%s")
|
||||
local REMIND=0
|
||||
local EXEC=dfu-programmer
|
||||
local TARGET=atmega32u4
|
||||
while true
|
||||
do
|
||||
sudo $EXEC $TARGET get > /dev/null 2>&1
|
||||
[ $? -eq 0 ] && break
|
||||
ENDTIME=$(date +"%s")
|
||||
DURATION=$(($ENDTIME-$STARTTIME))
|
||||
if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ]
|
||||
then
|
||||
echo "Did you forget to press the reset button?"
|
||||
REMIND=1
|
||||
fi
|
||||
sleep 1
|
||||
done
|
||||
}
|
||||
make clean
|
||||
make KEYMAP=${KMAP} ${THREADS}
|
||||
if [[ $? -eq 0 ]]
|
||||
then
|
||||
echo "please trigger flashing!"
|
||||
wait_bootloader
|
||||
sudo make KEYMAP=${KMAP} dfu ${THREADS}
|
||||
else
|
||||
echo "make failed"
|
||||
exit 77
|
||||
fi
|
||||
|
|
@ -0,0 +1,147 @@
|
|||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
// this is the style you want to emulate.
|
||||
|
||||
#include "amj60.h"
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _DEF 0
|
||||
#define _SPC 1
|
||||
#define _TAB 2
|
||||
#define _SFX 3
|
||||
|
||||
// dual-role shortcuts
|
||||
#define TABDUAL LT(_TAB, KC_TAB)
|
||||
#define CAPSDUAL CTL_T(KC_ESC)
|
||||
#define SPACEDUAL LT(_SPC, KC_SPACE)
|
||||
#define ENTERDUAL CTL_T(KC_ENT)
|
||||
// arrow cluster duality bottom right corner
|
||||
#define ARRLEFT ALT_T(KC_LEFT)
|
||||
#define ARRDOWN GUI_T(KC_DOWN)
|
||||
#define ARRUP SFT_T(KC_UP)
|
||||
#define ARRRIGHT CTL_T(KC_RIGHT)
|
||||
// german brackets
|
||||
#define GER_CUR_L RALT(KC_7) // [
|
||||
#define GER_CUR_R RALT(KC_0) // ]
|
||||
#define GER_PAR_L LSFT(KC_8) // (
|
||||
#define GER_PAR_R LSFT(KC_9) // )
|
||||
#define GER_ANG_L KC_NUBS // <
|
||||
#define GER_ANG_R LSFT(KC_NUBS) // >
|
||||
#define GER_BRC_L RALT(KC_8) // [
|
||||
#define GER_BRC_R RALT(KC_9) // ]
|
||||
|
||||
// increase readability
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _DEF: Default Layer
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Grv| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | Tab is Fn1
|
||||
* |-----------------------------------------------------------|
|
||||
* |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Return |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Sft | < | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2| RShift is UP
|
||||
* |-----------------------------------------------------------|
|
||||
* |Ctrl|Win |Alt | Space/Fn0 |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is
|
||||
* `-----------------------------------------------------------' LEFT DWN RIGHT
|
||||
*/
|
||||
[_DEF] = KEYMAP_ISO_SPLITRSHIFT(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
|
||||
TABDUAL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
CAPSDUAL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, ENTERDUAL, \
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, ARRUP, TG(_SFX), \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, SPACEDUAL, KC_RALT, ARRLEFT, ARRDOWN, ARRRIGHT),
|
||||
|
||||
/* Keymap 1: F-and-vim Layer, modified with Space (by holding space)
|
||||
* ,-----------------------------------------------------------.
|
||||
* |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete|
|
||||
* |-----------------------------------------------------------|
|
||||
* | |Paus| Up| [ | ] | | | | ( | ) | | | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | |Lft|Dwn|Rgt| | |Left|Down|Right|Up| | | PLAY |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | < | > | |M0 | | | | | Vol+ | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | |Alt |Prev|Vol-|Next|
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_SPC] = KEYMAP_ISO_SPLITRSHIFT(
|
||||
KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
|
||||
_______, KC_PAUS, KC_UP, GER_BRC_L, GER_BRC_R, _______, _______, GER_PAR_L, GER_PAR_R, _______, _______, _______, _______, _______, \
|
||||
_______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, KC_MPLY, \
|
||||
_______, _______, _______, _______, GER_ANG_L, GER_ANG_R, KC_SPACE, M(0), _______, _______, _______, _______, KC_VOLU, _______, \
|
||||
_______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT),
|
||||
|
||||
/* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab)
|
||||
* ,-----------------------------------------------------------.
|
||||
* |WAKE| | | | | | | | | | | | |Insert| TAB+GRC = WAKE
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | | { | } | | | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | |Pos1|PgDn|PgUp|End| | |Retrn |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | |AF2| | | | | PgUp | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | |Alt |Pos1|PgDn|End |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_TAB] = KEYMAP_ISO_SPLITRSHIFT(
|
||||
KC_WAKE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \
|
||||
_______, _______, _______, _______, _______, _______, _______, GER_CUR_L, GER_CUR_R, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______, _______, KC_ENT, \
|
||||
_______, _______, _______, _______, _______, _______, _______, M(1), _______, _______, _______, _______, KC_PGUP, _______, \
|
||||
_______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END),
|
||||
|
||||
/* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key)
|
||||
* ,-----------------------------------------------------------.
|
||||
* |RSET| | | | | | | 7| 8| 9| | | |Backsp |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | 4 | 5 | 6 | | | | \ |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | L | L | | | | | 1 | 2 | 3 | | | Return |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | L | L | L | L | L | L | | 0 | | /| Up | | All "L"s represent
|
||||
* |-----------------------------------------------------------| LED controlling
|
||||
* |Ctrl|Win |Alt | |Alt |Left|Down|Right|
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_SFX] = KEYMAP_ISO_SPLITRSHIFT(
|
||||
RESET, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, KC_BSPC, \
|
||||
_______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, KC_BSLS, \
|
||||
_______, F(2), F(3), _______, _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, XXXXXXX, KC_ENT, \
|
||||
_______, F(4), F(5), F(6), F(7), F(8), F(9), _______, _______, KC_0, _______, KC_SLSH, KC_UP, _______, \
|
||||
_______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
};
|
||||
|
||||
enum function_id {
|
||||
LAUNCH,
|
||||
RGBLED_TOGGLE,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[1] = ACTION_FUNCTION(LAUNCH),
|
||||
[10] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT),
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
return (record->event.pressed ?
|
||||
MACRO( D(RALT), T(SPC), U(RALT), END )
|
||||
:MACRO( END ));
|
||||
break;
|
||||
case 1:
|
||||
return (record->event.pressed ?
|
||||
MACRO( D(LALT), T(F2), U(LALT), END )
|
||||
:MACRO( END ));
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
|
@ -0,0 +1,4 @@
|
|||
#!/bin/bash
|
||||
git checkout amj60 # gets you on branch amj60
|
||||
git fetch origin # gets you up to date with origin
|
||||
git merge origin/master
|
||||
Loading…
Reference in New Issue