Keyboard: Six Shooter Keyboard (#3598)
* Created base sixshooter configuration * Added SixShooter basic LED on/off support. * Updated LED identifier numbers to align with layout identifiers (and IDs on PCB). * Minor sixshooter documentation cleanup. * Added sixshooter info.json file. * Moved sixshooter custom keycodes out of keymaps and into base keyboard files, small documentation tweaks. * Removed unnecessary boot section size definition. * Removing CONFIG_H if/define and replacing with #pragma once.
This commit is contained in:
Nicholas Shaff
Drashna Jaelre
parent
e5f201edb4
commit
317c624761
|
|
@ -0,0 +1,128 @@
|
|||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6666
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER bpiphany
|
||||
#define PRODUCT sixshooter
|
||||
#define DESCRIPTION A PCB for the CM Storm switch tester utilizing a Teensy 2.0.
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 1
|
||||
#define MATRIX_COLS 6
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { }
|
||||
#define MATRIX_COL_PINS { F7, F6, F1, F5, F4, F0 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
{
|
||||
"keyboard_name": "SixShooter",
|
||||
"maintainer": "qmk",
|
||||
"url": "https://geekhack.org/index.php?topic=70033.0",
|
||||
"width": 3,
|
||||
"height": 2,
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"key_count": 6,
|
||||
"layout": [{"label":"K00", "x":0, "y":0}, {"label":"K01", "x":1, "y":0}, {"label":"K02", "x":2, "y":0}, {"label":"K03", "x":0, "y":1}, {"label":"K04", "x":1, "y":1}, {"label":"K05", "x":2, "y":1}]
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
/* Copyright 2018 QMK Community
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
#define _BL 0
|
||||
#define _FN 1
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap 0: Media Keys
|
||||
* ,-----------.
|
||||
* |Mut| V-| V+|
|
||||
* |---+---+---|
|
||||
* |Prv|Ply|Nxt|
|
||||
* `-----------'
|
||||
*/
|
||||
[_BL] = LAYOUT( /* Base */
|
||||
MO(_FN), KC_VOLD, KC_VOLU, \
|
||||
KC_MPRV, KC_MPLY, KC_MNXT \
|
||||
),
|
||||
[_FN] = LAYOUT(
|
||||
KC_TRNS, SS_LON, SS_LOFF, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
};
|
||||
|
||||
void matrix_init_user(void) {
|
||||
/* Default all LEDs to on */
|
||||
sixshooter_led_all_on();
|
||||
}
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The default keymap for sixshooter
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
# The Six Shooter
|
||||
|
||||
A PCB for the CM Storm switch tester utilizing a Teensy 2.0 designed by Bpiphany. Because the PCB was designed with individual pins for each LED, there are custom keycodes (`SS_LON` and `SS_LOFF`) for turning on and off the backlight LEDs.
|
||||
|
||||
Keyboard Maintainer: QMK Community\
|
||||
Hardware Supported: Six Shooter PCB, Teensy 2.0\
|
||||
Hardware Availability: [GeekHack.org](https://geekhack.org/index.php?topic=70033.0)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make sixshooter:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
|
|
@ -0,0 +1,64 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
# Bootloader
|
||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||
# different sizes, comment this out, and the correct address will be loaded
|
||||
# automatically (+60). See bootloader.mk for all options.
|
||||
BOOTLOADER = halfkay
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
|
|
@ -0,0 +1,57 @@
|
|||
#include "sixshooter.h"
|
||||
|
||||
extern inline void sixshooter_led_0_on(void);
|
||||
extern inline void sixshooter_led_1_on(void);
|
||||
extern inline void sixshooter_led_2_on(void);
|
||||
extern inline void sixshooter_led_3_on(void);
|
||||
extern inline void sixshooter_led_4_on(void);
|
||||
extern inline void sixshooter_led_5_on(void);
|
||||
|
||||
extern inline void sixshooter_led_0_off(void);
|
||||
extern inline void sixshooter_led_1_off(void);
|
||||
extern inline void sixshooter_led_2_off(void);
|
||||
extern inline void sixshooter_led_3_off(void);
|
||||
extern inline void sixshooter_led_4_off(void);
|
||||
extern inline void sixshooter_led_5_off(void);
|
||||
|
||||
extern inline void sixshooter_led_all_on(void);
|
||||
extern inline void sixshooter_led_all_off(void);
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
if (record->event.pressed) {
|
||||
|
||||
/* Check for custom keycodes for turning on and off LEDs */
|
||||
switch(keycode) {
|
||||
case SS_LON:
|
||||
sixshooter_led_all_on();
|
||||
return false;
|
||||
case SS_LOFF:
|
||||
sixshooter_led_all_off();
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
|
|
@ -0,0 +1,55 @@
|
|||
#ifndef SIXSHOOTER_H
|
||||
#define SIXSHOOTER_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT( \
|
||||
K00, K01, K02, \
|
||||
K03, K04, K05 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05 }, \
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Define keyboard specific keycodes for controlling on/off for all LEDs as they
|
||||
* are all on different pins with this PCB, rather than a single backlight pin
|
||||
*/
|
||||
enum keyboard_keycode {
|
||||
SS_LON = SAFE_RANGE,
|
||||
SS_LOFF,
|
||||
SAFE_RANGE_KB
|
||||
};
|
||||
|
||||
inline void sixshooter_led_0_on(void) { DDRB |= (1<<6); PORTB |= (1<<6); }
|
||||
inline void sixshooter_led_1_on(void) { DDRC |= (1<<7); PORTC |= (1<<7); }
|
||||
inline void sixshooter_led_2_on(void) { DDRD |= (1<<0); PORTD |= (1<<0); }
|
||||
inline void sixshooter_led_3_on(void) { DDRB |= (1<<5); PORTB |= (1<<5); }
|
||||
inline void sixshooter_led_4_on(void) { DDRD |= (1<<7); PORTD |= (1<<7); }
|
||||
inline void sixshooter_led_5_on(void) { DDRB |= (1<<7); PORTB |= (1<<7); }
|
||||
|
||||
inline void sixshooter_led_0_off(void) { DDRB &= ~(1<<6); PORTB &= ~(1<<6); }
|
||||
inline void sixshooter_led_1_off(void) { DDRC &= ~(1<<7); PORTC &= ~(1<<7); }
|
||||
inline void sixshooter_led_2_off(void) { DDRD &= ~(1<<0); PORTD &= ~(1<<0); }
|
||||
inline void sixshooter_led_3_off(void) { DDRB &= ~(1<<5); PORTB &= ~(1<<5); }
|
||||
inline void sixshooter_led_4_off(void) { DDRD &= ~(1<<7); PORTD &= ~(1<<7); }
|
||||
inline void sixshooter_led_5_off(void) { DDRB &= ~(1<<7); PORTB &= ~(1<<7); }
|
||||
|
||||
inline void sixshooter_led_all_on(void) {
|
||||
sixshooter_led_0_on();
|
||||
sixshooter_led_1_on();
|
||||
sixshooter_led_2_on();
|
||||
sixshooter_led_3_on();
|
||||
sixshooter_led_4_on();
|
||||
sixshooter_led_5_on();
|
||||
}
|
||||
inline void sixshooter_led_all_off(void) {
|
||||
sixshooter_led_0_off();
|
||||
sixshooter_led_1_off();
|
||||
sixshooter_led_2_off();
|
||||
sixshooter_led_3_off();
|
||||
sixshooter_led_4_off();
|
||||
sixshooter_led_5_off();
|
||||
}
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue