Add Makefile.lufa to keyboard/hhkb and hbkb.
This commit is contained in:
tmk
parent
f427529a30
commit
2c5d3ac76f
|
|
@ -9,6 +9,7 @@
|
|||
* http://www.fourwalledcubicle.com/files/LUFA/Doc/120219/html/_page__software_bootloader_start.html
|
||||
*/
|
||||
|
||||
// TODO: support usbasp
|
||||
/* Boot Section Size in bytes
|
||||
* Teensy halfKay 512
|
||||
* Atmel DFU loader 4096
|
||||
|
|
|
|||
|
|
@ -1,56 +0,0 @@
|
|||
# Target file name (without extension).
|
||||
TARGET = hbk
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
# keyboard dependent files
|
||||
SRC = main.c \
|
||||
keymap.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name, you MUST set this to match the board you are using
|
||||
# type "make clean" after changing this, so all files will be rebuilt
|
||||
#MCU = at90usb162 # Teensy 1.0
|
||||
MCU = atmega32u4 # Teensy 2.0
|
||||
#MCU = at90usb646 # Teensy++ 1.0
|
||||
#MCU = at90usb1286 # Teensy++ 2.0
|
||||
|
||||
|
||||
# Processor frequency.
|
||||
# Normally the first thing your program should do is set the clock prescaler,
|
||||
# so your program will run at the correct speed. You should also set this
|
||||
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
||||
# examples use this variable to calculate timings. Do not add a "UL" here.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
|
||||
|
||||
|
||||
#---------------- Programming Options --------------------------
|
||||
#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
|
||||
PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \
|
||||
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \
|
||||
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start
|
||||
|
||||
|
||||
|
||||
include $(TOP_DIR)/protocol/pjrc.mk
|
||||
include $(TOP_DIR)/protocol.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
|
|
@ -0,0 +1 @@
|
|||
Makefile.lufa
|
||||
|
|
@ -0,0 +1,119 @@
|
|||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = hbkb_lufa
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
|
||||
# List C source files here. (C dependencies are automatically generated.)
|
||||
SRC += keymap.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
|
||||
|
||||
|
||||
# Boot Section Size in bytes
|
||||
# Teensy halfKay 512
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
OPT_DEFS += -DBOOT_SIZE=4096
|
||||
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
|
||||
include $(TOP_DIR)/protocol/lufa.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
|
|
@ -0,0 +1,56 @@
|
|||
# Target file name (without extension).
|
||||
TARGET = hbkb
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
# keyboard dependent files
|
||||
SRC = main.c \
|
||||
keymap.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name, you MUST set this to match the board you are using
|
||||
# type "make clean" after changing this, so all files will be rebuilt
|
||||
#MCU = at90usb162 # Teensy 1.0
|
||||
MCU = atmega32u4 # Teensy 2.0
|
||||
#MCU = at90usb646 # Teensy++ 1.0
|
||||
#MCU = at90usb1286 # Teensy++ 2.0
|
||||
|
||||
|
||||
# Processor frequency.
|
||||
# Normally the first thing your program should do is set the clock prescaler,
|
||||
# so your program will run at the correct speed. You should also set this
|
||||
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
||||
# examples use this variable to calculate timings. Do not add a "UL" here.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
|
||||
|
||||
|
||||
#---------------- Programming Options --------------------------
|
||||
#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
|
||||
PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \
|
||||
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \
|
||||
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start
|
||||
|
||||
|
||||
|
||||
include $(TOP_DIR)/protocol/pjrc.mk
|
||||
include $(TOP_DIR)/protocol.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
|
|
@ -24,7 +24,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0xBB00
|
||||
#define MANUFACTURER t.m.k.
|
||||
#define DEVICE_VER 0x0100
|
||||
#define PRODUCT Happy Buckling Keyboard
|
||||
|
||||
|
||||
#define DESCRIPTION mod version of IBM Model M keyboard
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,119 @@
|
|||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = hhkb_lufa
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
|
||||
# List C source files here. (C dependencies are automatically generated.)
|
||||
SRC += keymap.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name
|
||||
MCU = at90usb1286
|
||||
#MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
|
||||
|
||||
|
||||
# Boot Section Size in bytes
|
||||
# Teensy halfKay 512
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
#OPT_DEFS += -DBOOT_SIZE=4096
|
||||
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
|
||||
include $(TOP_DIR)/protocol/lufa.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
|
|
@ -13,12 +13,11 @@ TOP_DIR = ../..
|
|||
TARGET_DIR = .
|
||||
|
||||
# keyboard dependent files
|
||||
SRC = main.c \
|
||||
keymap.c \
|
||||
SRC = keymap.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
|
||||
CONFIG_H = config_pjrc.h
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name, you MUST set this to match the board you are using
|
||||
|
|
@ -53,8 +52,8 @@ PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
|
|||
|
||||
# Search Path
|
||||
VPATH = $(TARGET_DIR)
|
||||
VPATH = $(TOP_DIR)
|
||||
|
||||
include $(TOP_DIR)/protocol/pjrc.mk
|
||||
include $(TOP_DIR)/protocol.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
|
|
|
|||
|
|
@ -21,11 +21,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
/* controller configuration */
|
||||
#include "controller_teensy.h"
|
||||
|
||||
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0xCAFE
|
||||
#define PRODUCT_ID 0xCAFF
|
||||
#define DEVICE_VER 0x0101
|
||||
#define MANUFACTURER t.m.k.
|
||||
#define PRODUCT HHKB mod
|
||||
|
||||
|
||||
#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod
|
||||
|
||||
|
||||
|
|
@ -68,8 +68,8 @@ static bool matrix_has_ghost_in_row(uint8_t row);
|
|||
// key: on: 0/off: 1
|
||||
// prev: unknown: output previous key state(negated)?
|
||||
|
||||
#ifdef HOST_PJRC
|
||||
// Ports for Teensy
|
||||
#if defined(__AVR_AT90USB1286__)
|
||||
// Ports for Teensy++
|
||||
// row: PB0-2
|
||||
// col: PB3-5,6
|
||||
// key: PE6(pull-uped)
|
||||
|
|
@ -90,7 +90,8 @@ static bool matrix_has_ghost_in_row(uint8_t row);
|
|||
#define KEY_PREV_OFF() (PORTE &= ~(1<<7))
|
||||
#define KEY_POWER_ON()
|
||||
#define KEY_POWER_OFF()
|
||||
#else
|
||||
|
||||
#elif defined(__AVR_ATmega328P__)
|
||||
// Ports for V-USB
|
||||
// key: PB0(pull-uped)
|
||||
// prev: PB1
|
||||
|
|
@ -126,6 +127,9 @@ static bool matrix_has_ghost_in_row(uint8_t row);
|
|||
DDRC &= ~0x0F; \
|
||||
PORTC &= ~0x0F; \
|
||||
} while (0)
|
||||
|
||||
#else
|
||||
# error "define code for matrix scan"
|
||||
#endif
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -107,9 +107,7 @@ EXTRAKEY_ENABLE = yes # Audio control and System control
|
|||
# Teensy halfKay 512
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
#ifndef BOOT_SIZE
|
||||
#define BOOT_SIZE 512
|
||||
#endif
|
||||
#OPT_DEFS += -DBOOT_SIZE=4096
|
||||
|
||||
|
||||
# Search Path
|
||||
|
|
|
|||
|
|
@ -48,8 +48,7 @@ TOP_DIR = ../..
|
|||
TARGET_DIR = .
|
||||
|
||||
# keyboard dependent files
|
||||
SRC = protocol/pjrc/main.c \
|
||||
keymap.c \
|
||||
SRC = keymap.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
|
||||
|
|
|
|||
|
|
@ -2,7 +2,8 @@ PJRC_DIR = protocol/pjrc
|
|||
|
||||
OPT_DEFS += -DHOST_PJRC
|
||||
|
||||
SRC += $(PJRC_DIR)/pjrc.c \
|
||||
SRC += $(PJRC_DIR)/main.c \
|
||||
$(PJRC_DIR)/pjrc.c \
|
||||
$(PJRC_DIR)/usb_keyboard.c \
|
||||
$(PJRC_DIR)/usb_debug.c \
|
||||
$(PJRC_DIR)/usb.c
|
||||
|
|
|
|||
6
rules.mk
6
rules.mk
|
|
@ -416,6 +416,10 @@ dfu: $(TARGET).hex
|
|||
dfu-programmer $(MCU) erase
|
||||
dfu-programmer $(MCU) flash $(TARGET).hex
|
||||
dfu-programmer $(MCU) reset
|
||||
|
||||
dfu-start:
|
||||
dfu-programmer $(MCU) reset
|
||||
dfu-programmer $(MCU) start
|
||||
|
||||
flip-ee: $(TARGET).hex $(TARGET).eep
|
||||
$(COPY) $(TARGET).eep $(TARGET)eep.hex
|
||||
|
|
@ -599,4 +603,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
|
|||
.PHONY : all begin finish end sizebefore sizeafter gccversion \
|
||||
build elf hex eep lss sym coff extcoff \
|
||||
clean clean_list debug gdb-config show_path \
|
||||
program teensy dfu flip dfu-ee flip-ee
|
||||
program teensy dfu flip dfu-ee flip-ee dfu-start
|
||||
|
|
|
|||
Loading…
Reference in New Issue