1
0
Fork 0

Lets split eh (#3120)

* Line ending stuff again

* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)

* Added personal keymap, updated some of the EH files

* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional

* Added split code from lets_split, removed pro micro imports and LED code

THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT

* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now

* Updated eh.c

* More rework of the I2C code, added global flags for split boards.

* Introduced RGB over I2C, having weird edge case issues at the moment though

* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..

* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C

* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.

- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed

* Updated documentation for the new makefile options and #defines specific to split keyboards

* Added a bit more info to docs, so people aren't confused

* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder

* Removed some debugging from eh.c

* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).

* Added a README file to the Let's Split Eh?

* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c

* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.

* Fixed lets_split_eh not having a default version

* Removed "eh" references from lets_split folder for now

* Took lets_split folder from master to fix travis build errors, weird my local was overriding.

* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others

* Removed rules.mk from my lets_split keymap, not needed

* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
This commit is contained in:
That-Canadian 2018-07-16 19:25:02 -07:00 committed by Jack Humbert
parent b2877470ce
commit 0fab3bbde3
37 changed files with 2176 additions and 2 deletions

View File

@ -21,4 +21,5 @@ COMMON_VPATH += $(QUANTUM_PATH)/keymap_extras
COMMON_VPATH += $(QUANTUM_PATH)/audio COMMON_VPATH += $(QUANTUM_PATH)/audio
COMMON_VPATH += $(QUANTUM_PATH)/process_keycode COMMON_VPATH += $(QUANTUM_PATH)/process_keycode
COMMON_VPATH += $(QUANTUM_PATH)/api COMMON_VPATH += $(QUANTUM_PATH)/api
COMMON_VPATH += $(QUANTUM_PATH)/split_common
COMMON_VPATH += $(DRIVER_PATH) COMMON_VPATH += $(DRIVER_PATH)

View File

@ -210,5 +210,17 @@ QUANTUM_SRC:= \
$(QUANTUM_DIR)/process_keycode/process_leader.c $(QUANTUM_DIR)/process_keycode/process_leader.c
ifndef CUSTOM_MATRIX ifndef CUSTOM_MATRIX
QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
else
QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
endif
endif
ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
OPT_DEFS += -DSPLIT_KEYBOARD
QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
$(QUANTUM_DIR)/split_common/split_util.c \
$(QUANTUM_DIR)/split_common/i2c.c \
$(QUANTUM_DIR)/split_common/serial.c
endif endif

View File

@ -179,6 +179,16 @@ If you define these options you will enable the associated feature, which may in
* `#define MOUSEKEY_MAX_SPEED 7` * `#define MOUSEKEY_MAX_SPEED 7`
* `#define MOUSEKEY_WHEEL_DELAY 0` * `#define MOUSEKEY_WHEEL_DELAY 0`
## Split Keyboard Options
Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk
* `#define SPLIT_HAND_PIN B7`
* For using high/low pin to determine handedness, low = right hand, high = left hand. Replace 'B7' with the pin you are using. This is optional and you can still use the EEHANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
* `#define USE_I2C`
* For using I2C instead of Serial (defaults to serial)
# The `rules.mk` File # The `rules.mk` File
This is a [make](https://www.gnu.org/software/make/manual/make.html) file that is included by the top-level `Makefile`. It is used to set some information about the MCU that we will be compiling for as well as enabling and disabling certain features. This is a [make](https://www.gnu.org/software/make/manual/make.html) file that is included by the top-level `Makefile`. It is used to set some information about the MCU that we will be compiling for as well as enabling and disabling certain features.
@ -232,3 +242,5 @@ Use these to enable or disable building certain features. The more you have enab
* Unicode * Unicode
* `BLUETOOTH_ENABLE` * `BLUETOOTH_ENABLE`
* Enable Bluetooth with the Adafruit EZ-Key HID * Enable Bluetooth with the Adafruit EZ-Key HID
* `SPLIT_KEYBOARD`
* Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common

View File

@ -133,6 +133,10 @@ This consumes about 5390 bytes.
This enables [key lock](feature_key_lock.md). This consumes an additional 260 bytes. This enables [key lock](feature_key_lock.md). This consumes an additional 260 bytes.
`SPLIT_KEYBOARD`
This enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
## Customizing Makefile Options on a Per-Keymap Basis ## Customizing Makefile Options on a Per-Keymap Basis
If your keymap directory has a file called `rules.mk` any options you set in that file will take precedence over other `rules.mk` options for your particular keyboard. If your keymap directory has a file called `rules.mk` any options you set in that file will take precedence over other `rules.mk` options for your particular keyboard.

View File

@ -0,0 +1,32 @@
/*
This is the c configuration file for the keymap
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
/* Select hand configuration */
#define MASTER_LEFT
// #define _MASTER_RIGHT
// #define EE_HANDS
#endif

View File

@ -0,0 +1,163 @@
#include QMK_KEYBOARD_H
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _LOWER 3
#define _RAISE 4
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
BACKLIT
};
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------------------------------------------------.
* | RESET| Q | W | E | R | T | Y | U | I | O | P | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | S | D | F | G | H | J | K | L | ; | " |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* |Backlt| Ctrl | GUI | Alt |Lower |Space |Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
[_QWERTY] = LAYOUT( \
RESET, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
RGB_TOG, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
BACKLIT, KC_LCTL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Lower
* ,-----------------------------------------------------------------------------------.
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
[_LOWER] = LAYOUT( \
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Raise
* ,-----------------------------------------------------------------------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
[_RAISE] = LAYOUT( \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Adjust (Lower + Raise)
* ,-----------------------------------------------------------------------------------.
* | | Reset| | | | | | | | | | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_ADJUST] = LAYOUT( \
_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
)
};
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_qwerty);
#endif
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case BACKLIT:
if (record->event.pressed) {
register_code(KC_RSFT);
#ifdef BACKLIGHT_ENABLE
backlight_step();
#endif
} else {
unregister_code(KC_RSFT);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}

View File

@ -0,0 +1,13 @@
# Let's Split Eh?
![Let's Split Eh?](https://i.imgur.com/VMQG4qw.jpg?1)
This is a split 40% ortho board. It is the exact same footprint and the Let's Split keyboard by wootpatoot. This board has USB-C / RGB Underglow / and is all on-board. Meant as a drop-in replacement for the V2 Let's Split.
Keyboard Maintainer: [Christopher Poole (That-Canadian)](https://github.com/That-Canadian)
Make example for this keyboard (after setting up your build environment):
make lets_split_eh/eh:default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

View File

@ -0,0 +1,44 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xE401
#define DEVICE_VER 0x0E41
#define MANUFACTURER That-Canadian
#define PRODUCT Lets Split Eh?
#define DESCRIPTION An on-board component Lets Split w/ USB-C
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 8
#define MATRIX_COLS 6
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
#endif

View File

@ -0,0 +1,47 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef EH_CONFIG_H
#define EH_CONFIG_H
// To let configuration know this is of type EH, which will force I2C irregardless of user config
#define EH
#include "config_common.h"
/* Let's Split EH? pin-out */
#define MATRIX_ROW_PINS { B1, B3, D7, B4 }
#define MATRIX_COL_PINS { F4, F5, C6, B6, B5, D5 }
#define UNUSED_PINS
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_PIN B7
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
/* ws2812 RGB LED */
#define RGB_DI_PIN B2
#define RGBLED_NUM 6 // Number of LEDs (each hand)
/* Split Defines */
#define SPLIT_HAND_PIN D3
#endif

View File

@ -0,0 +1,14 @@
#include "lets_split_eh.h"
void matrix_init_kb(void) {
// JTAG disable for PORT F. write JTD bit twice within four cycles.
MCUCR |= (1<<JTD);
MCUCR |= (1<<JTD);
// Undo init of RX LED, we use that port currently
// DDRB &= ~(1<<0);
matrix_init_user();
};

View File

@ -0,0 +1,27 @@
#ifndef EH_H
#define EH_H
#include "lets_split_eh.h"
#include "quantum.h"
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
) \
{ \
{ L00, L01, L02, L03, L04, L05 }, \
{ L10, L11, L12, L13, L14, L15 }, \
{ L20, L21, L22, L23, L24, L25 }, \
{ L30, L31, L32, L33, L34, L35 }, \
{ R00, R01, R02, R03, R04, R05 }, \
{ R10, R11, R12, R13, R14, R15 }, \
{ R20, R21, R22, R23, R24, R25 }, \
{ R30, R31, R32, R33, R34, R35 } \
}
#define LAYOUT_ortho_4x12 LAYOUT
#endif

View File

@ -0,0 +1,4 @@
BOOTLOADER = atmel-dfu
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes

View File

@ -0,0 +1,26 @@
/*
This is the c configuration file for the keymap
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
#endif

View File

@ -0,0 +1,170 @@
#include QMK_KEYBOARD_H
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _LOWER 3
#define _RAISE 4
#define _FUNCTION 15
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST
};
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
// Defines for task manager and such
#define CALTDEL LCTL(LALT(KC_DEL))
#define TSKMGR LCTL(LSFT(KC_ESC))
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Func | A | S | D | F | G | H | J | K | L | ; | Enter|
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | N | M | , | . | / | ' |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Ctrl | ` | GUI | Alt |Lower | Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
[_QWERTY] = LAYOUT( \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
MO(_FUNCTION), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
OSM(MOD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, \
KC_LCTL, KC_GRV, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Lower
* ,-----------------------------------------------------------------------------------.
* | Esc | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } |Enter |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 | | | Mute | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | |Lower | Bksp | Bksp |Raise | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
[_LOWER] = LAYOUT( \
KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MUTE, _______, KC_PIPE, \
_______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Raise
* ,-----------------------------------------------------------------------------------.
* | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | 4 | 5 | 6 | + | F5 | F6 | - | = | [ | ] |Enter |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* |Enter | 7 | 8 | 9 | - | F11 | F12 |ISO # |ISO / | Mute | | \ |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | , | 0 | . |Lower | Bksp | Bksp |Raise | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
[_RAISE] = LAYOUT( \
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \
_______, KC_4, KC_5, KC_6, KC_PLUS, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, \
KC_ENT, KC_7, KC_8, KC_9, KC_MINS, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS, \
_______, KC_COMM, KC_0, KC_DOT, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Adjust (Lower + Raise)
* ,-----------------------------------------------------------------------------------.
* |Taskmg| | | | | | | |RGBVAI|RGBSAI|RGBHUI|caltde|
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | | | | | |Qwerty|RGBVAD|RGBSAD|RGBHUD|RGBTOG|
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | | | | | | | | | | |BLSTEP|
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | RESET|
* `-----------------------------------------------------------------------------------'
*/
[_ADJUST] = LAYOUT( \
TSKMGR, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAI, RGB_HUI, CALTDEL, \
_______, _______, _______, _______, _______, _______, _______, QWERTY, RGB_VAD, RGB_SAD, RGB_HUD, RGB_TOG, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET \
),
/* Function
* ,-----------------------------------------------------------------------------------.
* | | | | | | | | | Up | | | |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | | | | | | Left | Down |Right | | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Caps | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_FUNCTION] = LAYOUT( \
_______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, \
KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
)
};
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}

View File

@ -0,0 +1,3 @@
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View File

@ -0,0 +1,26 @@
/*
This is the c configuration file for the keymap
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
#endif

View File

@ -0,0 +1,170 @@
#include QMK_KEYBOARD_H
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _LOWER 3
#define _RAISE 4
#define _FUNCTION 15
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST
};
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
// Defines for task manager and such
#define CALTDEL LCTL(LALT(KC_DEL))
#define TSKMGR LCTL(LSFT(KC_ESC))
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Func | A | S | D | F | G | H | J | K | L | ; | Enter|
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | N | M | , | . | / | ' |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Ctrl | ` | GUI | Alt |Lower | Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
[_QWERTY] = LAYOUT( \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
MO(_FUNCTION), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
OSM(MOD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, \
KC_LCTL, KC_GRV, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Lower
* ,-----------------------------------------------------------------------------------.
* | Esc | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } |Enter |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 | | | Mute | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | |Lower | Bksp | Bksp |Raise | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
[_LOWER] = LAYOUT( \
KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MUTE, _______, KC_PIPE, \
_______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Raise
* ,-----------------------------------------------------------------------------------.
* | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | 4 | 5 | 6 | + | F5 | F6 | - | = | [ | ] |Enter |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* |Enter | 7 | 8 | 9 | - | F11 | F12 |ISO # |ISO / | Mute | | \ |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | , | 0 | . |Lower | Bksp | Bksp |Raise | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
[_RAISE] = LAYOUT( \
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \
_______, KC_4, KC_5, KC_6, KC_PLUS, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, \
KC_ENT, KC_7, KC_8, KC_9, KC_MINS, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS, \
_______, KC_COMM, KC_0, KC_DOT, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Adjust (Lower + Raise)
* ,-----------------------------------------------------------------------------------.
* |Taskmg| | | | | | | |RGBVAI|RGBSAI|RGBHUI|caltde|
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | | | | | |Qwerty|RGBVAD|RGBSAD|RGBHUD|RGBTOG|
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | | | | | | | | | | |BLSTEP|
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | RESET|
* `-----------------------------------------------------------------------------------'
*/
[_ADJUST] = LAYOUT( \
TSKMGR, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAI, RGB_HUI, CALTDEL, \
_______, _______, _______, _______, _______, _______, _______, QWERTY, RGB_VAD, RGB_SAD, RGB_HUD, RGB_TOG, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET \
),
/* Function
* ,-----------------------------------------------------------------------------------.
* | | | | | | | | | Up | | | |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | | | | | | Left | Down |Right | | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Caps | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_FUNCTION] = LAYOUT( \
_______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, \
KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
)
};
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}

View File

@ -0,0 +1,3 @@
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View File

@ -0,0 +1 @@
#include "lets_split_eh.h"

View File

@ -0,0 +1,27 @@
#ifndef LETS_SPLIT_EH_H
#define LETS_SPLIT_EH_H
#include "quantum.h"
#ifdef KEYBOARD_lets_split_eh_eh
#include "eh.h"
#endif
// Used to create a keymap using only KC_ prefixed keys
#define LAYOUT_kc( \
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
) \
LAYOUT( \
KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \
)
#define LAYOUT_kc_ortho_4x12 LAYOUT_kc
#endif

View File

@ -0,0 +1,70 @@
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = atmel-dfu
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
API_SYSEX_ENABLE = no
SPLIT_KEYBOARD = yes
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
DEFAULT_FOLDER = lets_split_eh/eh

View File

@ -29,6 +29,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "backlight.h" #include "backlight.h"
#include "quantum.h" #include "quantum.h"
#ifdef SPLIT_KEYBOARD
#include "split_flags.h"
#endif
#ifdef MIDI_ENABLE #ifdef MIDI_ENABLE
#include "process_midi.h" #include "process_midi.h"
#endif #endif
@ -134,21 +138,39 @@ action_t action_for_key(uint8_t layer, keypos_t key)
#ifdef BACKLIGHT_ENABLE #ifdef BACKLIGHT_ENABLE
case BL_ON: case BL_ON:
action.code = ACTION_BACKLIGHT_ON(); action.code = ACTION_BACKLIGHT_ON();
#ifdef SPLIT_KEYBOARD
BACKLIT_DIRTY = true;
#endif
break; break;
case BL_OFF: case BL_OFF:
action.code = ACTION_BACKLIGHT_OFF(); action.code = ACTION_BACKLIGHT_OFF();
#ifdef SPLIT_KEYBOARD
BACKLIT_DIRTY = true;
#endif
break; break;
case BL_DEC: case BL_DEC:
action.code = ACTION_BACKLIGHT_DECREASE(); action.code = ACTION_BACKLIGHT_DECREASE();
#ifdef SPLIT_KEYBOARD
BACKLIT_DIRTY = true;
#endif
break; break;
case BL_INC: case BL_INC:
action.code = ACTION_BACKLIGHT_INCREASE(); action.code = ACTION_BACKLIGHT_INCREASE();
#ifdef SPLIT_KEYBOARD
BACKLIT_DIRTY = true;
#endif
break; break;
case BL_TOGG: case BL_TOGG:
action.code = ACTION_BACKLIGHT_TOGGLE(); action.code = ACTION_BACKLIGHT_TOGGLE();
#ifdef SPLIT_KEYBOARD
BACKLIT_DIRTY = true;
#endif
break; break;
case BL_STEP: case BL_STEP:
action.code = ACTION_BACKLIGHT_STEP(); action.code = ACTION_BACKLIGHT_STEP();
#ifdef SPLIT_KEYBOARD
BACKLIT_DIRTY = true;
#endif
break; break;
#endif #endif
#ifdef SWAP_HANDS_ENABLE #ifdef SWAP_HANDS_ENABLE

View File

@ -312,8 +312,16 @@ bool process_record_quantum(keyrecord_t *record) {
#endif #endif
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE) #if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
case RGB_TOG: case RGB_TOG:
// Split keyboards need to trigger on key-up for edge-case issue
#ifndef SPLIT_KEYBOARD
if (record->event.pressed) { if (record->event.pressed) {
#else
if (!record->event.pressed) {
#endif
rgblight_toggle(); rgblight_toggle();
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
} }
return false; return false;
case RGB_MODE_FORWARD: case RGB_MODE_FORWARD:
@ -325,6 +333,9 @@ bool process_record_quantum(keyrecord_t *record) {
else { else {
rgblight_step(); rgblight_step();
} }
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
} }
return false; return false;
case RGB_MODE_REVERSE: case RGB_MODE_REVERSE:
@ -336,36 +347,87 @@ bool process_record_quantum(keyrecord_t *record) {
else { else {
rgblight_step_reverse(); rgblight_step_reverse();
} }
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
} }
return false; return false;
case RGB_HUI: case RGB_HUI:
// Split keyboards need to trigger on key-up for edge-case issue
#ifndef SPLIT_KEYBOARD
if (record->event.pressed) { if (record->event.pressed) {
#else
if (!record->event.pressed) {
#endif
rgblight_increase_hue(); rgblight_increase_hue();
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
} }
return false; return false;
case RGB_HUD: case RGB_HUD:
// Split keyboards need to trigger on key-up for edge-case issue
#ifndef SPLIT_KEYBOARD
if (record->event.pressed) { if (record->event.pressed) {
#else
if (!record->event.pressed) {
#endif
rgblight_decrease_hue(); rgblight_decrease_hue();
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
} }
return false; return false;
case RGB_SAI: case RGB_SAI:
// Split keyboards need to trigger on key-up for edge-case issue
#ifndef SPLIT_KEYBOARD
if (record->event.pressed) { if (record->event.pressed) {
#else
if (!record->event.pressed) {
#endif
rgblight_increase_sat(); rgblight_increase_sat();
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
} }
return false; return false;
case RGB_SAD: case RGB_SAD:
// Split keyboards need to trigger on key-up for edge-case issue
#ifndef SPLIT_KEYBOARD
if (record->event.pressed) { if (record->event.pressed) {
#else
if (!record->event.pressed) {
#endif
rgblight_decrease_sat(); rgblight_decrease_sat();
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
} }
return false; return false;
case RGB_VAI: case RGB_VAI:
// Split keyboards need to trigger on key-up for edge-case issue
#ifndef SPLIT_KEYBOARD
if (record->event.pressed) { if (record->event.pressed) {
#else
if (!record->event.pressed) {
#endif
rgblight_increase_val(); rgblight_increase_val();
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
} }
return false; return false;
case RGB_VAD: case RGB_VAD:
// Split keyboards need to trigger on key-up for edge-case issue
#ifndef SPLIT_KEYBOARD
if (record->event.pressed) { if (record->event.pressed) {
#else
if (!record->event.pressed) {
#endif
rgblight_decrease_val(); rgblight_decrease_val();
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
} }
return false; return false;
case RGB_SPI: case RGB_SPI:
@ -381,6 +443,9 @@ bool process_record_quantum(keyrecord_t *record) {
case RGB_MODE_PLAIN: case RGB_MODE_PLAIN:
if (record->event.pressed) { if (record->event.pressed) {
rgblight_mode(1); rgblight_mode(1);
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
} }
return false; return false;
case RGB_MODE_BREATHE: case RGB_MODE_BREATHE:

View File

@ -33,9 +33,15 @@
#ifdef RGBLIGHT_ENABLE #ifdef RGBLIGHT_ENABLE
#include "rgblight.h" #include "rgblight.h"
#endif #endif
#ifdef SPLIT_KEYBOARD
#include "split_flags.h"
#endif
#ifdef RGB_MATRIX_ENABLE #ifdef RGB_MATRIX_ENABLE
#include "rgb_matrix.h" #include "rgb_matrix.h"
#endif #endif
#include "action_layer.h" #include "action_layer.h"
#include "eeconfig.h" #include "eeconfig.h"
#include <stddef.h> #include <stddef.h>

View File

@ -127,7 +127,7 @@ void eeconfig_update_rgblight(uint32_t val) {
#endif #endif
} }
void eeconfig_update_rgblight_default(void) { void eeconfig_update_rgblight_default(void) {
dprintf("eeconfig_update_rgblight_default\n"); //dprintf("eeconfig_update_rgblight_default\n");
rgblight_config.enable = 1; rgblight_config.enable = 1;
rgblight_config.mode = 1; rgblight_config.mode = 1;
rgblight_config.hue = 0; rgblight_config.hue = 0;

View File

@ -76,6 +76,10 @@
#include "rgblight_types.h" #include "rgblight_types.h"
#include "rgblight_list.h" #include "rgblight_list.h"
#if defined(__AVR__)
#include <avr/pgmspace.h>
#endif
extern LED_TYPE led[RGBLED_NUM]; extern LED_TYPE led[RGBLED_NUM];
extern const uint8_t RGBLED_BREATHING_INTERVALS[4] PROGMEM; extern const uint8_t RGBLED_BREATHING_INTERVALS[4] PROGMEM;

View File

@ -0,0 +1,2 @@
:0F000000000000000000000000000000000001F0
:00000001FF

View File

@ -0,0 +1,2 @@
:0F000000000000000000000000000000000000F1
:00000001FF

187
quantum/split_common/i2c.c Normal file
View File

@ -0,0 +1,187 @@
#include <util/twi.h>
#include <avr/io.h>
#include <stdlib.h>
#include <avr/interrupt.h>
#include <util/twi.h>
#include <stdbool.h>
#include "i2c.h"
#include "split_flags.h"
#if defined(USE_I2C) || defined(EH)
// Limits the amount of we wait for any one i2c transaction.
// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
// 9 bits, a single transaction will take around 90μs to complete.
//
// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
// poll loop takes at least 8 clock cycles to execute
#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
static volatile uint8_t slave_buffer_pos;
static volatile bool slave_has_register_set = false;
// Wait for an i2c operation to finish
inline static
void i2c_delay(void) {
uint16_t lim = 0;
while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
lim++;
// easier way, but will wait slightly longer
// _delay_us(100);
}
// Setup twi to run at 100kHz
void i2c_master_init(void) {
// no prescaler
TWSR = 0;
// Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
// Check datasheets for more info.
TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
}
// Start a transaction with the given i2c slave address. The direction of the
// transfer is set with I2C_READ and I2C_WRITE.
// returns: 0 => success
// 1 => error
uint8_t i2c_master_start(uint8_t address) {
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
i2c_delay();
// check that we started successfully
if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
return 1;
TWDR = address;
TWCR = (1<<TWINT) | (1<<TWEN);
i2c_delay();
if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
return 1; // slave did not acknowledge
else
return 0; // success
}
// Finish the i2c transaction.
void i2c_master_stop(void) {
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
uint16_t lim = 0;
while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
lim++;
}
// Write one byte to the i2c slave.
// returns 0 => slave ACK
// 1 => slave NACK
uint8_t i2c_master_write(uint8_t data) {
TWDR = data;
TWCR = (1<<TWINT) | (1<<TWEN);
i2c_delay();
// check if the slave acknowledged us
return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
}
uint8_t i2c_master_write_data(void *const TXdata, uint8_t dataLen) {
uint8_t *data = (uint8_t *)TXdata;
int err = 0;
for (int i = 0; i < dataLen; i++) {
err = i2c_master_write(data[i]);
if ( err )
return err;
}
return err;
}
// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
// if ack=0 the acknowledge bit is not set.
// returns: byte read from i2c device
uint8_t i2c_master_read(int ack) {
TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
i2c_delay();
return TWDR;
}
void i2c_reset_state(void) {
TWCR = 0;
}
void i2c_slave_init(uint8_t address) {
TWAR = address << 0; // slave i2c address
// TWEN - twi enable
// TWEA - enable address acknowledgement
// TWINT - twi interrupt flag
// TWIE - enable the twi interrupt
TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
}
ISR(TWI_vect);
ISR(TWI_vect) {
uint8_t ack = 1;
switch(TW_STATUS) {
case TW_SR_SLA_ACK:
// this device has been addressed as a slave receiver
slave_has_register_set = false;
break;
case TW_SR_DATA_ACK:
// this device has received data as a slave receiver
// The first byte that we receive in this transaction sets the location
// of the read/write location of the slaves memory that it exposes over
// i2c. After that, bytes will be written at slave_buffer_pos, incrementing
// slave_buffer_pos after each write.
if(!slave_has_register_set) {
slave_buffer_pos = TWDR;
// don't acknowledge the master if this memory loctaion is out of bounds
if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
ack = 0;
slave_buffer_pos = 0;
}
slave_has_register_set = true;
} else {
i2c_slave_buffer[slave_buffer_pos] = TWDR;
if ( slave_buffer_pos == I2C_BACKLIT_START) {
BACKLIT_DIRTY = true;
} else if ( slave_buffer_pos == (I2C_RGB_START+3)) {
RGB_DIRTY = true;
}
BUFFER_POS_INC();
}
break;
case TW_ST_SLA_ACK:
case TW_ST_DATA_ACK:
// master has addressed this device as a slave transmitter and is
// requesting data.
TWDR = i2c_slave_buffer[slave_buffer_pos];
BUFFER_POS_INC();
break;
case TW_BUS_ERROR: // something went wrong, reset twi state
TWCR = 0;
default:
break;
}
// Reset everything, so we are ready for the next TWI interrupt
TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
}
#endif

View File

@ -0,0 +1,60 @@
#ifndef I2C_H
#define I2C_H
#include <stdint.h>
#ifndef F_CPU
#define F_CPU 16000000UL
#endif
#define I2C_READ 1
#define I2C_WRITE 0
#define I2C_ACK 1
#define I2C_NACK 0
// Address location defines (Keymap should be last, as it's size is dynamic)
#define I2C_BACKLIT_START 0x00
// Need 4 bytes for RGB (32 bit)
#define I2C_RGB_START 0x01
#define I2C_KEYMAP_START 0x06
// Slave buffer (8bit per)
// Rows per hand + backlit space + rgb space
// TODO : Make this dynamically sized
#define SLAVE_BUFFER_SIZE 0x20
// i2c SCL clock frequency
#define SCL_CLOCK 400000L
// Support 8bits right now (8 cols) will need to edit to take higher (code exists in delta split?)
extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
void i2c_master_init(void);
uint8_t i2c_master_start(uint8_t address);
void i2c_master_stop(void);
uint8_t i2c_master_write(uint8_t data);
uint8_t i2c_master_write_data(void *const TXdata, uint8_t dataLen);
uint8_t i2c_master_read(int);
void i2c_reset_state(void);
void i2c_slave_init(uint8_t address);
static inline unsigned char i2c_start_read(unsigned char addr) {
return i2c_master_start((addr << 1) | I2C_READ);
}
static inline unsigned char i2c_start_write(unsigned char addr) {
return i2c_master_start((addr << 1) | I2C_WRITE);
}
// from SSD1306 scrips
extern unsigned char i2c_rep_start(unsigned char addr);
extern void i2c_start_wait(unsigned char addr);
extern unsigned char i2c_readAck(void);
extern unsigned char i2c_readNak(void);
extern unsigned char i2c_read(unsigned char ack);
#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
#endif

View File

@ -0,0 +1,510 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* scan matrix
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include "wait.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "split_util.h"
#include "pro_micro.h"
#include "config.h"
#include "timer.h"
#include "split_flags.h"
#ifdef RGBLIGHT_ENABLE
# include "rgblight.h"
#endif
#ifdef BACKLIGHT_ENABLE
# include "backlight.h"
#endif
#if defined(USE_I2C) || defined(EH)
# include "i2c.h"
#else // USE_SERIAL
# include "serial.h"
#endif
#ifndef DEBOUNCING_DELAY
# define DEBOUNCING_DELAY 5
#endif
#if (DEBOUNCING_DELAY > 0)
static uint16_t debouncing_time;
static bool debouncing = false;
#endif
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
# define matrix_bitpop(i) bitpop(matrix[i])
# define ROW_SHIFTER ((uint8_t)1)
#else
# error "Currently only supports 8 COLS"
#endif
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
#define ERROR_DISCONNECT_COUNT 5
#define ROWS_PER_HAND (MATRIX_ROWS/2)
static uint8_t error_count = 0;
static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
#if (DIODE_DIRECTION == COL2ROW)
static void init_cols(void);
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
static void unselect_rows(void);
static void select_row(uint8_t row);
static void unselect_row(uint8_t row);
#elif (DIODE_DIRECTION == ROW2COL)
static void init_rows(void);
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
static void unselect_cols(void);
static void unselect_col(uint8_t col);
static void select_col(uint8_t col);
#endif
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
__attribute__ ((weak))
void matrix_init_user(void) {
}
__attribute__ ((weak))
void matrix_scan_user(void) {
}
__attribute__ ((weak))
void matrix_slave_scan_user(void) {
}
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
#ifdef DISABLE_JTAG
// JTAG disable for PORT F. write JTD bit twice within four cycles.
MCUCR |= (1<<JTD);
MCUCR |= (1<<JTD);
#endif
debug_enable = true;
debug_matrix = true;
debug_mouse = true;
// initialize row and col
#if (DIODE_DIRECTION == COL2ROW)
unselect_rows();
init_cols();
#elif (DIODE_DIRECTION == ROW2COL)
unselect_cols();
init_rows();
#endif
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
matrix_init_quantum();
}
uint8_t _matrix_scan(void)
{
int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
#if (DIODE_DIRECTION == COL2ROW)
// Set row, read cols
for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
# if (DEBOUNCING_DELAY > 0)
bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
if (matrix_changed) {
debouncing = true;
debouncing_time = timer_read();
}
# else
read_cols_on_row(matrix+offset, current_row);
# endif
}
#elif (DIODE_DIRECTION == ROW2COL)
// Set col, read rows
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
# if (DEBOUNCING_DELAY > 0)
bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
if (matrix_changed) {
debouncing = true;
debouncing_time = timer_read();
}
# else
read_rows_on_col(matrix+offset, current_col);
# endif
}
#endif
# if (DEBOUNCING_DELAY > 0)
if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
matrix[i+offset] = matrix_debouncing[i+offset];
}
debouncing = false;
}
# endif
return 1;
}
#if defined(USE_I2C) || defined(EH)
// Get rows from other half over i2c
int i2c_transaction(void) {
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
int err = 0;
// write backlight info
#ifdef BACKLIGHT_ENABLE
if (BACKLIT_DIRTY) {
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
if (err) goto i2c_error;
// Backlight location
err = i2c_master_write(I2C_BACKLIT_START);
if (err) goto i2c_error;
// Write backlight
i2c_master_write(get_backlight_level());
BACKLIT_DIRTY = false;
}
#endif
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
if (err) goto i2c_error;
// start of matrix stored at I2C_KEYMAP_START
err = i2c_master_write(I2C_KEYMAP_START);
if (err) goto i2c_error;
// Start read
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
if (err) goto i2c_error;
if (!err) {
int i;
for (i = 0; i < ROWS_PER_HAND-1; ++i) {
matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
}
matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
i2c_master_stop();
} else {
i2c_error: // the cable is disconnceted, or something else went wrong
i2c_reset_state();
return err;
}
#ifdef RGBLIGHT_ENABLE
if (RGB_DIRTY) {
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
if (err) goto i2c_error;
// RGB Location
err = i2c_master_write(I2C_RGB_START);
if (err) goto i2c_error;
uint32_t dword = eeconfig_read_rgblight();
// Write RGB
err = i2c_master_write_data(&dword, 4);
if (err) goto i2c_error;
RGB_DIRTY = false;
i2c_master_stop();
}
#endif
return 0;
}
#else // USE_SERIAL
int serial_transaction(void) {
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
if (serial_update_buffers()) {
return 1;
}
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[slaveOffset+i] = serial_slave_buffer[i];
}
return 0;
}
#endif
uint8_t matrix_scan(void)
{
uint8_t ret = _matrix_scan();
#if defined(USE_I2C) || defined(EH)
if( i2c_transaction() ) {
#else // USE_SERIAL
if( serial_transaction() ) {
#endif
error_count++;
if (error_count > ERROR_DISCONNECT_COUNT) {
// reset other half if disconnected
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[slaveOffset+i] = 0;
}
}
} else {
error_count = 0;
}
matrix_scan_quantum();
return ret;
}
void matrix_slave_scan(void) {
_matrix_scan();
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
#if defined(USE_I2C) || defined(EH)
for (int i = 0; i < ROWS_PER_HAND; ++i) {
i2c_slave_buffer[I2C_KEYMAP_START+i] = matrix[offset+i];
}
#else // USE_SERIAL
for (int i = 0; i < ROWS_PER_HAND; ++i) {
serial_slave_buffer[i] = matrix[offset+i];
}
#endif
matrix_slave_scan_user();
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}
#if (DIODE_DIRECTION == COL2ROW)
static void init_cols(void)
{
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
uint8_t pin = col_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
{
// Store last value of row prior to reading
matrix_row_t last_row_value = current_matrix[current_row];
// Clear data in matrix row
current_matrix[current_row] = 0;
// Select row and wait for row selecton to stabilize
select_row(current_row);
wait_us(30);
// For each col...
for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
// Select the col pin to read (active low)
uint8_t pin = col_pins[col_index];
uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
// Populate the matrix row with the state of the col pin
current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
}
// Unselect row
unselect_row(current_row);
return (last_row_value != current_matrix[current_row]);
}
static void select_row(uint8_t row)
{
uint8_t pin = row_pins[row];
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
}
static void unselect_row(uint8_t row)
{
uint8_t pin = row_pins[row];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
static void unselect_rows(void)
{
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
uint8_t pin = row_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
#elif (DIODE_DIRECTION == ROW2COL)
static void init_rows(void)
{
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
uint8_t pin = row_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
{
bool matrix_changed = false;
// Select col and wait for col selecton to stabilize
select_col(current_col);
wait_us(30);
// For each row...
for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
{
// Store last value of row prior to reading
matrix_row_t last_row_value = current_matrix[row_index];
// Check row pin state
if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
{
// Pin LO, set col bit
current_matrix[row_index] |= (ROW_SHIFTER << current_col);
}
else
{
// Pin HI, clear col bit
current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
}
// Determine if the matrix changed state
if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
{
matrix_changed = true;
}
}
// Unselect col
unselect_col(current_col);
return matrix_changed;
}
static void select_col(uint8_t col)
{
uint8_t pin = col_pins[col];
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
}
static void unselect_col(uint8_t col)
{
uint8_t pin = col_pins[col];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
static void unselect_cols(void)
{
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
uint8_t pin = col_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
#endif

View File

@ -0,0 +1,228 @@
/*
* WARNING: be careful changing this code, it is very timing dependent
*/
#ifndef F_CPU
#define F_CPU 16000000
#endif
#include <avr/io.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <stdbool.h>
#include "serial.h"
#ifndef USE_I2C
// Serial pulse period in microseconds. Its probably a bad idea to lower this
// value.
#define SERIAL_DELAY 24
uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
#define SLAVE_DATA_CORRUPT (1<<0)
volatile uint8_t status = 0;
inline static
void serial_delay(void) {
_delay_us(SERIAL_DELAY);
}
inline static
void serial_output(void) {
SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
}
// make the serial pin an input with pull-up resistor
inline static
void serial_input(void) {
SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
}
inline static
uint8_t serial_read_pin(void) {
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
}
inline static
void serial_low(void) {
SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
}
inline static
void serial_high(void) {
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
}
void serial_master_init(void) {
serial_output();
serial_high();
}
void serial_slave_init(void) {
serial_input();
// Enable INT0
EIMSK |= _BV(INT0);
// Trigger on falling edge of INT0
EICRA &= ~(_BV(ISC00) | _BV(ISC01));
}
// Used by the master to synchronize timing with the slave.
static
void sync_recv(void) {
serial_input();
// This shouldn't hang if the slave disconnects because the
// serial line will float to high if the slave does disconnect.
while (!serial_read_pin());
serial_delay();
}
// Used by the slave to send a synchronization signal to the master.
static
void sync_send(void) {
serial_output();
serial_low();
serial_delay();
serial_high();
}
// Reads a byte from the serial line
static
uint8_t serial_read_byte(void) {
uint8_t byte = 0;
serial_input();
for ( uint8_t i = 0; i < 8; ++i) {
byte = (byte << 1) | serial_read_pin();
serial_delay();
_delay_us(1);
}
return byte;
}
// Sends a byte with MSB ordering
static
void serial_write_byte(uint8_t data) {
uint8_t b = 8;
serial_output();
while( b-- ) {
if(data & (1 << b)) {
serial_high();
} else {
serial_low();
}
serial_delay();
}
}
// interrupt handle to be used by the slave device
ISR(SERIAL_PIN_INTERRUPT) {
sync_send();
uint8_t checksum = 0;
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
serial_write_byte(serial_slave_buffer[i]);
sync_send();
checksum += serial_slave_buffer[i];
}
serial_write_byte(checksum);
sync_send();
// wait for the sync to finish sending
serial_delay();
// read the middle of pulses
_delay_us(SERIAL_DELAY/2);
uint8_t checksum_computed = 0;
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
serial_master_buffer[i] = serial_read_byte();
sync_send();
checksum_computed += serial_master_buffer[i];
}
uint8_t checksum_received = serial_read_byte();
sync_send();
serial_input(); // end transaction
if ( checksum_computed != checksum_received ) {
status |= SLAVE_DATA_CORRUPT;
} else {
status &= ~SLAVE_DATA_CORRUPT;
}
}
inline
bool serial_slave_DATA_CORRUPT(void) {
return status & SLAVE_DATA_CORRUPT;
}
// Copies the serial_slave_buffer to the master and sends the
// serial_master_buffer to the slave.
//
// Returns:
// 0 => no error
// 1 => slave did not respond
int serial_update_buffers(void) {
// this code is very time dependent, so we need to disable interrupts
cli();
// signal to the slave that we want to start a transaction
serial_output();
serial_low();
_delay_us(1);
// wait for the slaves response
serial_input();
serial_high();
_delay_us(SERIAL_DELAY);
// check if the slave is present
if (serial_read_pin()) {
// slave failed to pull the line low, assume not present
sei();
return 1;
}
// if the slave is present syncronize with it
sync_recv();
uint8_t checksum_computed = 0;
// receive data from the slave
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
serial_slave_buffer[i] = serial_read_byte();
sync_recv();
checksum_computed += serial_slave_buffer[i];
}
uint8_t checksum_received = serial_read_byte();
sync_recv();
if (checksum_computed != checksum_received) {
sei();
return 1;
}
uint8_t checksum = 0;
// send data to the slave
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
serial_write_byte(serial_master_buffer[i]);
sync_recv();
checksum += serial_master_buffer[i];
}
serial_write_byte(checksum);
sync_recv();
// always, release the line when not in use
serial_output();
serial_high();
sei();
return 0;
}
#endif

View File

@ -0,0 +1,26 @@
#ifndef MY_SERIAL_H
#define MY_SERIAL_H
#include "config.h"
#include <stdbool.h>
/* TODO: some defines for interrupt setup */
#define SERIAL_PIN_DDR DDRD
#define SERIAL_PIN_PORT PORTD
#define SERIAL_PIN_INPUT PIND
#define SERIAL_PIN_MASK _BV(PD0)
#define SERIAL_PIN_INTERRUPT INT0_vect
#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
#define SERIAL_MASTER_BUFFER_LENGTH 1
// Buffers for master - slave communication
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
void serial_master_init(void);
void serial_slave_init(void);
int serial_update_buffers(void);
bool serial_slave_data_corrupt(void);
#endif

View File

@ -0,0 +1,5 @@
#include "split_flags.h"
volatile bool RGB_DIRTY = false;
volatile bool BACKLIT_DIRTY = false;

View File

@ -0,0 +1,20 @@
#ifndef SPLIT_FLAGS_H
#define SPLIT_FLAGS_H
#include <stdbool.h>
#include <stdint.h>
/**
* Global Flags
**/
//RGB Stuff
extern volatile bool RGB_DIRTY;
//Backlight Stuff
extern volatile bool BACKLIT_DIRTY;
#endif

View File

@ -0,0 +1,145 @@
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <avr/eeprom.h>
#include "split_util.h"
#include "matrix.h"
#include "keyboard.h"
#include "config.h"
#include "timer.h"
#include "split_flags.h"
#ifdef RGBLIGHT_ENABLE
# include "rgblight.h"
#endif
#ifdef BACKLIGHT_ENABLE
# include "backlight.h"
#endif
#ifdef SPLIT_HAND_PIN
# include "pincontrol.h"
#endif
#if defined(USE_I2C) || defined(EH)
# include "i2c.h"
#else
# include "serial.h"
#endif
volatile bool isLeftHand = true;
volatile uint8_t setTries = 0;
static void setup_handedness(void) {
#ifdef SPLIT_HAND_PIN
// Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
pinMode(SPLIT_HAND_PIN, PinDirectionInput);
isLeftHand = digitalRead(SPLIT_HAND_PIN);
#else
#ifdef EE_HANDS
isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
#else
// I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
#if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
isLeftHand = !has_usb();
#else
isLeftHand = has_usb();
#endif
#endif
#endif
}
static void keyboard_master_setup(void) {
#if defined(USE_I2C) || defined(EH)
i2c_master_init();
#ifdef SSD1306OLED
matrix_master_OLED_init ();
#endif
#else
serial_master_init();
#endif
// For master the Backlight info needs to be sent on startup
// Otherwise the salve won't start with the proper info until an update
BACKLIT_DIRTY = true;
}
static void keyboard_slave_setup(void) {
timer_init();
#if defined(USE_I2C) || defined(EH)
i2c_slave_init(SLAVE_I2C_ADDRESS);
#else
serial_slave_init();
#endif
}
bool has_usb(void) {
USBCON |= (1 << OTGPADE); //enables VBUS pad
_delay_us(5);
return (USBSTA & (1<<VBUS)); //checks state of VBUS
}
void split_keyboard_setup(void) {
setup_handedness();
if (has_usb()) {
keyboard_master_setup();
} else {
keyboard_slave_setup();
}
sei();
}
void keyboard_slave_loop(void) {
matrix_init();
//Init RGB
#ifdef RGBLIGHT_ENABLE
rgblight_init();
#endif
while (1) {
matrix_slave_scan();
// read backlight info
#ifdef BACKLIGHT_ENABLE
if (BACKLIT_DIRTY) {
backlight_set(i2c_slave_buffer[I2C_BACKLIT_START]);
BACKLIT_DIRTY = false;
}
#endif
#ifdef RGBLIGHT_ENABLE
if (RGB_DIRTY) {
cli();
uint32_t dword;
/*dword = i2c_slave_buffer[I2C_RGB_START + 3];
dword = (dword << 8) + i2c_slave_buffer[I2C_RGB_START + 2];
dword = (dword << 8) + i2c_slave_buffer[I2C_RGB_START + 1];
dword = (dword << 8) + i2c_slave_buffer[I2C_RGB_START];*/
uint8_t *dword_dat = (uint8_t *)(&dword);
for (int i = 0; i < 4; i++) {
dword_dat[i] = i2c_slave_buffer[I2C_RGB_START+i];
}
rgblight_update_dword(dword);
RGB_DIRTY = false;
sei();
}
#endif
}
}
// this code runs before the usb and keyboard is initialized
void matrix_setup(void) {
split_keyboard_setup();
if (!has_usb()) {
//rgblight_init();
keyboard_slave_loop();
}
}

View File

@ -0,0 +1,23 @@
#ifndef SPLIT_KEYBOARD_UTIL_H
#define SPLIT_KEYBOARD_UTIL_H
#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include "eeconfig.h"
#define SLAVE_I2C_ADDRESS 0x32
extern volatile bool isLeftHand;
// slave version of matix scan, defined in matrix.c
void matrix_slave_scan(void);
void split_keyboard_setup(void);
bool has_usb(void);
void keyboard_slave_loop(void);
void matrix_master_OLED_init (void);
#endif