1
0
Fork 0

Keyboard: Document the correct path to the let's split EEPROM files. (#3539)

* Document the correct path to the let's split EEPROM files.

* Document the EEPROM files in /quantum/split_common/ as the canonical location.
This commit is contained in:
Joshua Magee 2018-08-02 13:52:24 -07:00 committed by Drashna Jaelre
parent a057f1ca9e
commit 0a00583462
1 changed files with 1 additions and 1 deletions

View File

@ -104,7 +104,7 @@ If this is the first time you're flashing the boards, you have to flash EEPROM
2. Run `ls /dev | grep tty` Note down which ports you see
2. Plug the keyboard in, if it's new, it should enter bootloader, if it's not new, see **Entering bootloader** on how to enter bootloader mode
4. Right after entering bootloader, run `ls /dev | grep tty` again. There should be a new tty, this is the bootloader TTY, note it down. If nothing shows see **Entering bootloader** on how to enter bootloader mode
6. For the left hand side, run `avrdude -c avr109 -p m32u4 -P /dev/ttyS1 -U eeprom:w:"./keyboards/lets_split_vitamins/eeprom-lefthand.eep":a`
6. For the left hand side, run `avrdude -c avr109 -p m32u4 -P /dev/ttyS1 -U eeprom:w:"./quantum/split_common/eeprom-lefthand.eep":a`
Replace ***/dev/ttyS1*** with the port you noted down earlier. If you're on windows using msys2, replace ***/dev/ttyS1*** with COM2, note that the number is one higher than the tty number.
Do the same For the right hand, but change the file to ***eeprom-righthand.eep***