27e3458f44
* Adding Rama M10-A Macropad * ch-ch-ch changes... * Major overhaul based on SMT's keymap. * more changes. * Moved the FKeys to the ADJUST layer. * More rearranging. * Alias in Atreus62 keymap to make it more legible Added config.h to fix tapping_term issue for Caps Lock key in OSX * Added OrthoDox layout. * More layout changes. * Fixing things with the keyboard. * Finishing touches. Set left-hand master in config.h Embedded the arrow keys in keymap.c * Revised keymap making this easier to use. * additions and changes. * changes to various keymaps. * Minor adjustments to OrthoDox layout. * Added Eco keymap. Updated Let's Split keymap. * Added gherkin * Removed my M10A keymap * Planck Keymap Updates Updated my Planck keymap and created a simple keymap for Seph's Preonic. * Added readme * readme fixes * Update readme.md more clarification * Keymap Tweaks Removed the Power button setting from the keymap. It was in a horrible location. I'll work on getting it setup somewhere else sometime later. * Added Readme I finally got around to adding a readme to this keymap. I've also added minor changes to the layout. * Fixed Keymap Error * Fixed Readme * adding iris and levinson keymaps * Tweaks to keymap * added youngJZ keymap * Changes to keymap Added a readme.md * Levinson changes Added the readme.md and rules.mk files. Configured RGB underglow and backlighting. * fixed readme * changes to keymaps * Updated keymap * Updated readme.md * Updated Readme (again) * Updated Readme Fixed formatting. Again. * Updated readme This is the last readme update for this keyboard update. I hope. * Added Contra keymap * Kinesis Keymap Update * Updated Keymaps I've updated my Kinesis (Stapelberg) layout and my Clueboard 66 layout. I've also updated my Kinesis Readme. * Clueboard Keymap update Added media keys to my Clueboard 66 Rev2 layout. * Added keymap Added Minidox keymap & rules. Added user function to Let's Split keymap that turns off the red LEDs on the Pro Micros. * New Zen keymap Added Zen keyboard to my list of keyboards, so had to generate a new keymap for it. Also adding some changes to my MiniDox keymap and config.h, as well as my Levinson's config.h. The config.h file changes enable ee_hands. * A few changes for useability I made a few changes to the Minidox keymap to see if I can't make it more useable. I'm also working on streamlining the Zen keyboard keymap to reduce layers. * Re-vamped Iris keymap. * changes * minor keymap change This was a minor keymap change to use mod_tap for the backspace key: ALT when held, BSPC when tapped. * Added Fourier keymap * Keymap Cleanup Moved KC_ESC to KC_CAPS, and changed KC_ESC to KC_GRV This is because of muscle memory, I kept hitting ESC when trying to hit TAB. * Keymap Adjustments Swapped Caps/Esc, put Caps in Raise/Lower layers, put Grv in normal Esc position. Adjusted the readme.md to reflect these changes. * minor tweaks Added code to disable red ProMicro LEDs after flashing. * Clean-up * Corrections to keymap. Fixed a foul-up in the Zen keymap where the lctrl was where the LOWER should have been. * Changes to make this fall in line with the new Layout features * Moving to LAYOUTs for 4x12 boards * fixed config.h file * standardization changes * Reverted Atreus62 keymap to LAYOUT format * Switch Preonic and Nyquist to ortho_5x12 * Corrections to config.h * config.h file tweaks * config.h file tweaks |
||
|---|---|---|
| .. | ||
| keymaps | ||
| rev1 | ||
| config.h | ||
| eeprom-lefthand.eep | ||
| eeprom-righthand.eep | ||
| i2c.c | ||
| i2c.h | ||
| matrix.c | ||
| minidox.c | ||
| minidox.h | ||
| pro_micro.h | ||
| readme.md | ||
| rules.mk | ||
| serial.c | ||
| serial.h | ||
| split_util.c | ||
| split_util.h | ||
readme.md
MiniDox
A compact version of the ErgoDox
Keyboard Maintainer: That-Canadian Hardware Supported: MiniDox PCB rev1 Pro Micro
Make example for this keyboard (after setting up your build environment):
make minidox/rev1:default
See build environment setup then the make instructions for more information.
Build Guide
A build guide for putting together the MiniDox v1 can be found here: MiniDox Build Log / Guide
Flashing
Note: Most of this is copied from the Let's Split readme, because it is awesome
From the root directory run make PROJECT:KEYMAP:avrdude for automatic serial port resolution and flashing.
Example: make minidox/rev1:default:avrdude
Choosing which board to plug the USB cable into (choosing Master)
Because the two boards are identical, the firmware has logic to differentiate the left and right board.
It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable.
The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side.
The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
Setting the left hand as master
If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out EE_HANDS and comment out I2C_MASTER_RIGHT or MASTER_RIGHT if for some reason it was set.
Setting the right hand as master
If you always plug the usb cable into the right board, add an extra flag to your config.h
#define MASTER_RIGHT
Setting EE_hands to use either hands as master
If you define EE_HANDS in your config.h, you will need to set the
EEPROM for the left and right halves.
The EEPROM is used to store whether the half is left handed or right handed. This makes it so that the same firmware file will run on both hands instead of having to flash left and right handed versions of the firmware to each half. To flash the EEPROM file for the left half run:
avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
// or the equivalent in dfu-programmer
and similarly for right half
avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
// or the equivalent in dfu-programmer
NOTE: replace $(COM_PORT) with the port of your device (e.g. /dev/ttyACM0)
After you have flashed the EEPROM, you then need to set EE_HANDS in your config.h, rebuild the hex files and reflash.
Note that you need to program both halves, but you have the option of using different keymaps for each half. You could program the left half with a QWERTY layout and the right half with a Colemak layout using bootmagic's default layout option. Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the right half is connected.