2dea540afb
* Refactored M6-B to use Zeal60 RGB backlight code * Fixed M6-B LED co-ordinates * Minor changes to RGB config for Zeal65 * Added dynamic keymaps to WT80-A, WT60-A, WT-80A, U80-A
161 lines
5.2 KiB
C
161 lines
5.2 KiB
C
/* Copyright 2018 Jason Williams (Wilba)
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#pragma once
|
|
|
|
#include "config_common.h"
|
|
|
|
/* USB Device descriptor parameter */
|
|
#define VENDOR_ID 0x5241 // "RW"
|
|
#define PRODUCT_ID 0x006B // 6-B
|
|
#define DEVICE_VER 0x0001
|
|
#define MANUFACTURER RAMA.WORKS
|
|
#define PRODUCT RAMA M6-B
|
|
#define DESCRIPTION RAMA M6-B Macropad
|
|
|
|
/* key matrix size */
|
|
#define MATRIX_ROWS 1
|
|
#define MATRIX_COLS 6
|
|
|
|
/*
|
|
* Keyboard Matrix Assignments
|
|
*
|
|
* Change this to how you wired your keyboard
|
|
* COLS: AVR pins used for columns, left to right
|
|
* ROWS: AVR pins used for rows, top to bottom
|
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
|
*
|
|
*/
|
|
#define MATRIX_ROW_PINS { E6 }
|
|
#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
|
|
#define UNUSED_PINS
|
|
|
|
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
|
|
#define DIODE_DIRECTION COL2ROW
|
|
|
|
// #define BACKLIGHT_PIN B7
|
|
// #define BACKLIGHT_BREATHING
|
|
// #define BACKLIGHT_LEVELS 3
|
|
|
|
|
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
|
#define DEBOUNCING_DELAY 5
|
|
|
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
|
//#define MATRIX_HAS_GHOST
|
|
|
|
/* number of backlight levels */
|
|
|
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
#define LOCKING_SUPPORT_ENABLE
|
|
/* Locking resynchronize hack */
|
|
#define LOCKING_RESYNC_ENABLE
|
|
|
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
|
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
|
*/
|
|
// #define GRAVE_ESC_CTRL_OVERRIDE
|
|
|
|
/*
|
|
* Force NKRO
|
|
*
|
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
|
* makefile for this to work.)
|
|
*
|
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
|
* until the next keyboard reset.
|
|
*
|
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
|
* fully operational during normal computer usage.
|
|
*
|
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
|
* power-up.
|
|
*
|
|
*/
|
|
//#define FORCE_NKRO
|
|
|
|
/*
|
|
* Magic Key Options
|
|
*
|
|
* Magic keys are hotkey commands that allow control over firmware functions of
|
|
* the keyboard. They are best used in combination with the HID Listen program,
|
|
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
|
*
|
|
* The options below allow the magic key functionality to be changed. This is
|
|
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
|
*
|
|
*/
|
|
|
|
/* key combination for magic key command */
|
|
#define IS_COMMAND() ( \
|
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
|
)
|
|
|
|
#define RGB_BACKLIGHT_ENABLED 1
|
|
|
|
// This conditionally compiles the backlight code for M6-B specifics
|
|
#define RGB_BACKLIGHT_M6_B
|
|
|
|
// enable/disable LEDs based on layout
|
|
#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
|
|
#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
|
|
#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
|
|
#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
|
|
#define RGB_BACKLIGHT_USE_ISO_ENTER 0
|
|
#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
|
|
|
|
// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
|
|
#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
|
|
|
|
// disable backlight after timeout in minutes, 0 = no timeout
|
|
#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
|
|
|
|
// the default effect (RGB test)
|
|
#define RGB_BACKLIGHT_EFFECT 255
|
|
|
|
// These define which keys in the matrix are alphas/mods
|
|
// Used for backlight effects so colors are different for
|
|
// alphas vs. mods
|
|
// Each value is for a row, bit 0 is column 0
|
|
// Alpha=0 Mod=1
|
|
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0
|
|
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0
|
|
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0
|
|
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0
|
|
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0
|
|
|
|
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
|
|
|
|
// EEPROM usage
|
|
|
|
// TODO: refactor with new user EEPROM code (coming soon)
|
|
#define EEPROM_MAGIC 0x451F
|
|
#define EEPROM_MAGIC_ADDR 32
|
|
// Bump this every time we change what we store
|
|
// This will automatically reset the EEPROM with defaults
|
|
// and avoid loading invalid data from the EEPROM
|
|
#define EEPROM_VERSION 0x07
|
|
#define EEPROM_VERSION_ADDR 34
|
|
|
|
// Backlight config starts after EEPROM version
|
|
#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
|
|
// Dynamic keymap starts after backlight config (35+37)
|
|
#define DYNAMIC_KEYMAP_EEPROM_ADDR 72
|
|
|