76 lines
		
	
	
		
			2.4 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			76 lines
		
	
	
		
			2.4 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| #ifndef CONFIG_H
 | |
|     #define CONFIG_H
 | |
| 
 | |
|     #include "config_common.h"
 | |
| 
 | |
|     #define VENDOR_ID       0x1234
 | |
|     #define PRODUCT_ID      0x5678
 | |
|     #define DEVICE_VER      0x0001
 | |
|     #define MANUFACTURER    QMK
 | |
|     #define PRODUCT         TRACKPOINT-DEMO
 | |
|     #define DESCRIPTION     Simple demonstration for IBM Trackpoint integration
 | |
| 
 | |
|     #define MATRIX_ROWS 1
 | |
|     #define MATRIX_COLS 3
 | |
| 
 | |
|     #ifdef PS2_USE_USART
 | |
|         #define PS2_CLOCK_PORT  PORTD
 | |
|         #define PS2_CLOCK_PIN   PIND
 | |
|         #define PS2_CLOCK_DDR   DDRD
 | |
|         #define PS2_CLOCK_BIT   5
 | |
|         #define PS2_DATA_PORT   PORTD
 | |
|         #define PS2_DATA_PIN    PIND
 | |
|         #define PS2_DATA_DDR    DDRD
 | |
|         #define PS2_DATA_BIT    2
 | |
| 
 | |
|         /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
 | |
|         /* set DDR of CLOCK as input to be slave */
 | |
|         #define PS2_USART_INIT() do {   \
 | |
|             PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
 | |
|             PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
 | |
|             UCSR1C = ((1 << UMSEL10) |  \
 | |
|                       (3 << UPM10)   |  \
 | |
|                       (0 << USBS1)   |  \
 | |
|                       (3 << UCSZ10)  |  \
 | |
|                       (0 << UCPOL1));   \
 | |
|             UCSR1A = 0;                 \
 | |
|             UBRR1H = 0;                 \
 | |
|             UBRR1L = 0;                 \
 | |
|         } while (0)
 | |
|         #define PS2_USART_RX_INT_ON() do {  \
 | |
|             UCSR1B = ((1 << RXCIE1) |       \
 | |
|                       (1 << RXEN1));        \
 | |
|         } while (0)
 | |
|         #define PS2_USART_RX_POLL_ON() do { \
 | |
|             UCSR1B = (1 << RXEN1);          \
 | |
|         } while (0)
 | |
|         #define PS2_USART_OFF() do {    \
 | |
|             UCSR1C = 0;                 \
 | |
|             UCSR1B &= ~((1 << RXEN1) |  \
 | |
|                         (1 << TXEN1));  \
 | |
|         } while (0)
 | |
|         #define PS2_USART_RX_READY      (UCSR1A & (1<<RXC1))
 | |
|         #define PS2_USART_RX_DATA       UDR1
 | |
|         #define PS2_USART_ERROR         (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
 | |
|         #define PS2_USART_RX_VECT       USART1_RX_vect
 | |
|     #endif
 | |
| 
 | |
|     #define MATRIX_COL_PINS { F1, F4, F5 }
 | |
|     #define MATRIX_ROW_PINS { F0 }
 | |
|     #define UNUSED_PINS
 | |
| 
 | |
|     /* COL2ROW or ROW2COL */
 | |
|     #define DIODE_DIRECTION COL2ROW
 | |
| 
 | |
|     #define DEBOUNCING_DELAY 5
 | |
| 
 | |
|     #define LOCKING_SUPPORT_ENABLE
 | |
|     #define LOCKING_RESYNC_ENABLE
 | |
| 
 | |
|     /* key combination for command */
 | |
|     #define IS_COMMAND() ( \
 | |
|         keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 | |
|     )
 | |
| 
 | |
| #endif
 |