1
0
Fork 0
qmk_firmware/keyboards/vinta
Michael Pio 7a22da9f05 Update rules.mk for Vinta (#4317)
changed dfu args to exit to application mode after flashing
2018-11-01 17:28:01 -07:00
..
boards/GENERIC_STM32_F042X6 Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00
keymaps/default Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00
bootloader_defs.h Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00
chconf.h Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00
config.h Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00
halconf.h Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00
mcuconf.h Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00
readme.md Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00
rules.mk Update rules.mk for Vinta (#4317) 2018-11-01 17:28:01 -07:00
vinta.c Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00
vinta.h Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00

readme.md

Vinta

Vinta

This is an ARM-powered 65% keyboard PCB with USB Mini B connector and breakout for optional RGB underglow.

Keyboard Maintainer: Peioris and on github
Hardware Supported: Vinta with STM32F042K6T6
Hardware Availability: Private Groupbuy (will post on Reddit once QMK has RGB underglow working)

Make example for this keyboard (after setting up your build environment):

make vinta:default

See build environment setup then the make instructions for more information.

Developer's Note

STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a RESET keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a RESET keycode).