Add 6-ball macropad

keyboards/6ball/6ball.c

@@ -0,0 +1,5 @@
+#include "6ball.h"
+
+void matrix_init_kb(void) {
+	matrix_init_user();
+}

keyboards/6ball/6ball.h

@@ -0,0 +1,16 @@
+#ifndef SIXBALL_H
+#define SIXBALL_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+      k01, k02, k03, \
+      k04, k05, k06 \
+) \
+{ \
+    { k02, k03, k06, k05, k04, k01 } \
+} 
+
+#define KC_KEYMAP(k01, k02, k03, k04, k05, k06) KEYMAP(KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06)
+
+#endif

keyboards/6ball/config.h

@@ -0,0 +1,53 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCEEB
+#define PRODUCT_ID      0x0007
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    That-Canadian
+#define PRODUCT         6-Ball
+#define DESCRIPTION     6-Ball Macropuck
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 6
+
+/* pin-out */
+#define MATRIX_ROW_PINS { F5 }
+#define MATRIX_COL_PINS { F4, D4, B5, B6, B2, F6 }
+#define UNUSED_PINS
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN F7
+#define RGBLIGHT_TIMER
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 6    // Number of LEDs
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define TAPPING_TERM 200
+
+#endif

keyboards/6ball/keymaps/default/keymap.c

@@ -0,0 +1,28 @@
+#include "6ball.h"
+
+#define _MAIN 0
+#define _FN 1
+
+#define KC_ KC_TRNS
+
+#define KC_CAPW LGUI(LSFT(KC_3))        // Capture whole screen
+#define KC_CPYW LGUI(LSFT(LCTL(KC_3)))  // Copy whole screen
+#define KC_CAPP LGUI(LSFT(KC_4))        // Capture portion of screen
+#define KC_CPYP LGUI(LSFT(LCTL(KC_4)))  // Copy portion of screen
+#define KC_X0 LT(_FN, KC_ESC)
+#define KC_RTOG RGB_TOG
+#define KC_RMOD RGB_MOD
+#define KC_RHUI RGB_HUI
+#define KC_RHUD RGB_HUD
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_MAIN] = KC_KEYMAP(
+      F  , X0 ,LCTL,
+      R  , D  , M  
+  ),
+
+  [_FN] = KC_KEYMAP(
+      F  ,    ,RHUI,
+     RTOG,RMOD,RHUD
+  )
+};

keyboards/6ball/keymaps/default/rules.mk

@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/6ball/readme.md

@@ -0,0 +1,14 @@
+6-Ball
+======
+
+A circular 6-key macropad made by ThatCanadian.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: Pro Micro ATmega32U4  
+Hardware Availability: ThatCanadian
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 6ball:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/6ball/rules.mk

@@ -0,0 +1,67 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = yes        # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend