test build of 'Host shield' in minimal env.
This commit is contained in:
tmk
parent
9382bf2f76
commit
c5060ea819
|
|
@ -5,6 +5,7 @@ SRC += $(COMMON_DIR)/host.c \
|
|||
$(COMMON_DIR)/layer.c \
|
||||
$(COMMON_DIR)/timer.c \
|
||||
$(COMMON_DIR)/print.c \
|
||||
$(COMMON_DIR)/debug.c \
|
||||
$(COMMON_DIR)/bootloader.c \
|
||||
$(COMMON_DIR)/util.c
|
||||
|
||||
|
|
|
|||
|
|
@ -18,19 +18,28 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#ifndef DEBUG_H
|
||||
#define DEBUG_H 1
|
||||
|
||||
#include <stdbool.h>
|
||||
#include "print.h"
|
||||
|
||||
|
||||
#define debug(s) if(debug_enable) print(s)
|
||||
#define debug(s) if(debug_enable) print_P(PSTR(s))
|
||||
#define debug_hex(c) if(debug_enable) phex(c)
|
||||
#define debug_hex16(i) if(debug_enable) phex16(i)
|
||||
#define debug_bin(c) if(debug_enable) pbin(c)
|
||||
#define debug_bin_reverse(c) if(debug_enable) pbin_reverse(c)
|
||||
|
||||
|
||||
bool debug_enable;
|
||||
bool debug_matrix;
|
||||
bool debug_keyboard;
|
||||
bool debug_mouse;
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
extern bool debug_enable;
|
||||
extern bool debug_matrix;
|
||||
extern bool debug_keyboard;
|
||||
extern bool debug_mouse;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -23,6 +23,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#include "host_driver.h"
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#ifdef NKRO_ENABLE
|
||||
extern bool keyboard_nkro;
|
||||
#endif
|
||||
|
|
@ -54,4 +58,8 @@ void host_mouse_send(report_mouse_t *report);
|
|||
void host_system_send(uint16_t data);
|
||||
void host_consumer_send(uint16_t data);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -21,8 +21,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#include <stdint.h>
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
void keyboard_init(void);
|
||||
void keyboard_proc(void);
|
||||
void keyboard_set_leds(uint8_t leds);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -29,11 +29,17 @@
|
|||
#include <avr/pgmspace.h>
|
||||
|
||||
|
||||
extern bool print_enable;
|
||||
|
||||
// avoid collision with arduino/Print.h
|
||||
#ifndef __cplusplus
|
||||
// this macro allows you to write print("some text") and
|
||||
// the string is automatically placed into flash memory :)
|
||||
#define print(s) print_P(PSTR(s))
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
extern bool print_enable;
|
||||
|
||||
void print_S(const char *s);
|
||||
void print_P(const char *s);
|
||||
|
|
@ -41,5 +47,8 @@ void phex(unsigned char c);
|
|||
void phex16(unsigned int i);
|
||||
void pbin(unsigned char c);
|
||||
void pbin_reverse(unsigned char c);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -21,7 +21,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#include <stdint.h>
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* transmit a character. return 0 on success, -1 on error. */
|
||||
int8_t sendchar(uint8_t c);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -23,10 +23,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#ifndef TIMER_PRESCALER
|
||||
# if F_CPU > 16000000
|
||||
# define TIMER_PRESCALER 256
|
||||
# elif F_CPU >= 4000000
|
||||
# elif F_CPU > 2000000
|
||||
# define TIMER_PRESCALER 64
|
||||
# else
|
||||
# elif F_CPU > 250000
|
||||
# define TIMER_PRESCALER 8
|
||||
# else
|
||||
# define TIMER_PRESCALER 1
|
||||
# endif
|
||||
#endif
|
||||
#define TIMER_RAW_FREQ (F_CPU/TIMER_PRESCALER)
|
||||
|
|
@ -42,6 +44,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define TIMER_DIFF_MS(a, b) TIMER_DIFF(a, b, UINT16_MAX)
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
extern volatile uint16_t timer_count;
|
||||
|
||||
|
||||
|
|
@ -49,5 +54,8 @@ void timer_init(void);
|
|||
void timer_clear(void);
|
||||
uint16_t timer_read(void);
|
||||
uint16_t timer_elapsed(uint16_t last);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,18 +1,20 @@
|
|||
LUFA_DIR = protocol/lufa
|
||||
|
||||
# Path to the LUFA library
|
||||
LUFA_PATH = $(TOP_DIR)/protocol/lufa/LUFA-120219
|
||||
LUFA_PATH = protocol/lufa/LUFA-120219
|
||||
|
||||
# Create the LUFA source path variables by including the LUFA root makefile
|
||||
include $(LUFA_PATH)/LUFA/makefile
|
||||
include $(TOP_DIR)/$(LUFA_PATH)/LUFA/makefile
|
||||
|
||||
LUFA_SRC = $(LUFA_DIR)/lufa.c \
|
||||
$(LUFA_DIR)/descriptor.c \
|
||||
$(LUFA_SRC_USB)
|
||||
SRC += $(subst $(LUFA_PATH)/,,$(LUFA_SRC))
|
||||
|
||||
SRC += $(LUFA_SRC)
|
||||
|
||||
# Search Path
|
||||
VPATH += $(LUFA_PATH)
|
||||
VPATH += $(TOP_DIR)/$(LUFA_DIR)
|
||||
VPATH += $(TOP_DIR)/$(LUFA_PATH)
|
||||
|
||||
# Option modules
|
||||
#ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE)
|
||||
|
|
|
|||
|
|
@ -59,7 +59,7 @@ static void send_keyboard(report_keyboard_t *report);
|
|||
static void send_mouse(report_mouse_t *report);
|
||||
static void send_system(uint16_t data);
|
||||
static void send_consumer(uint16_t data);
|
||||
static host_driver_t lufa_driver = {
|
||||
host_driver_t lufa_driver = {
|
||||
keyboard_leds,
|
||||
send_keyboard,
|
||||
send_mouse,
|
||||
|
|
@ -68,49 +68,9 @@ static host_driver_t lufa_driver = {
|
|||
};
|
||||
|
||||
|
||||
static void SetupHardware(void);
|
||||
static void Console_Task(void);
|
||||
|
||||
int main(void)
|
||||
{
|
||||
SetupHardware();
|
||||
sei();
|
||||
|
||||
print_enable = true;
|
||||
debug_enable = true;
|
||||
debug_matrix = true;
|
||||
debug_keyboard = true;
|
||||
debug_mouse = true;
|
||||
|
||||
// TODO: can't print here
|
||||
debug("LUFA init\n");
|
||||
|
||||
keyboard_init();
|
||||
host_set_driver(&lufa_driver);
|
||||
while (1) {
|
||||
keyboard_proc();
|
||||
|
||||
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
|
||||
USB_USBTask();
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
void SetupHardware(void)
|
||||
{
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
|
||||
USB_Init();
|
||||
|
||||
// for Console_Task
|
||||
USB_Device_EnableSOFEvents();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Console
|
||||
******************************************************************************/
|
||||
#ifdef CONSOLE_ENABLE
|
||||
static void Console_Task(void)
|
||||
{
|
||||
|
|
@ -446,3 +406,51 @@ int8_t sendchar(uint8_t c)
|
|||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* main
|
||||
******************************************************************************/
|
||||
static void SetupHardware(void)
|
||||
{
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
|
||||
// Leonardo needs. Without this USB device is not recognized.
|
||||
USB_Disable();
|
||||
|
||||
USB_Init();
|
||||
|
||||
// for Console_Task
|
||||
USB_Device_EnableSOFEvents();
|
||||
}
|
||||
|
||||
int main(void) __attribute__ ((weak));
|
||||
int main(void)
|
||||
{
|
||||
SetupHardware();
|
||||
sei();
|
||||
|
||||
print_enable = true;
|
||||
debug_enable = true;
|
||||
debug_matrix = true;
|
||||
debug_keyboard = true;
|
||||
debug_mouse = true;
|
||||
|
||||
// TODO: can't print here
|
||||
debug("LUFA init\n");
|
||||
|
||||
keyboard_init();
|
||||
host_set_driver(&lufa_driver);
|
||||
while (1) {
|
||||
keyboard_proc();
|
||||
|
||||
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
|
||||
USB_USBTask();
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -47,8 +47,19 @@
|
|||
#include <string.h>
|
||||
#include <LUFA/Version.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include "host.h"
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
extern host_driver_t lufa_driver;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
/* extra report structure */
|
||||
typedef struct {
|
||||
uint8_t report_id;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,67 @@
|
|||
USB_HID_DIR = protocol/usb_hid
|
||||
|
||||
|
||||
#
|
||||
# USB Host Shield
|
||||
#
|
||||
USB_HOST_SHIELD_DIR = $(USB_HID_DIR)/USB_Host_Shield_2.0
|
||||
USB_HOST_SHIELD_SRC = \
|
||||
$(USB_HOST_SHIELD_DIR)/Usb.cpp \
|
||||
$(USB_HOST_SHIELD_DIR)/hid.cpp \
|
||||
$(USB_HOST_SHIELD_DIR)/parsetools.cpp \
|
||||
$(USB_HOST_SHIELD_DIR)/message.cpp
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Arduino
|
||||
#
|
||||
ARDUINO_DIR = $(USB_HID_DIR)/arduino-1.0.1
|
||||
ARDUINO_CORES_DIR = $(ARDUINO_DIR)/cores/arduino
|
||||
ARDUINO_CORES_SRC = \
|
||||
$(ARDUINO_CORES_DIR)/Print.cpp \
|
||||
$(ARDUINO_CORES_DIR)/Stream.cpp
|
||||
|
||||
# replaced with override_Serial.c
|
||||
# $(ARDUINO_CORES_DIR)/CDC.cpp \
|
||||
# $(ARDUINO_CORES_DIR)/HID.cpp \
|
||||
# $(ARDUINO_CORES_DIR)/USBCore.cpp \
|
||||
|
||||
# replaced with override_wiring.c and common/timer.c
|
||||
# $(ARDUINO_CORES_DIR)/wiring.c \
|
||||
|
||||
|
||||
|
||||
#
|
||||
# HID parser
|
||||
#
|
||||
SRC += $(USB_HID_DIR)/parser.cpp
|
||||
|
||||
# replace arduino/CDC.cpp
|
||||
SRC += $(USB_HID_DIR)/override_Serial.cpp
|
||||
|
||||
# replace arduino/wiring.c
|
||||
SRC += $(USB_HID_DIR)/override_wiring.c
|
||||
SRC += common/timer.c
|
||||
|
||||
SRC += $(USB_HOST_SHIELD_SRC)
|
||||
SRC += $(ARDUINO_CORES_SRC)
|
||||
|
||||
|
||||
OPT_DEFS += -DARDUINO=101
|
||||
# Arduino USBCore needs USB_VID and USB_PID.
|
||||
#OPT_DEFS += -DARDUINO=101 -DUSB_VID=0x2341 -DUSB_PID=0x8036
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Search Path
|
||||
#
|
||||
VPATH += $(TOP_DIR)/$(USB_HID_DIR)
|
||||
VPATH += $(TOP_DIR)/$(USB_HOST_SHIELD_DIR)
|
||||
|
||||
# for #include "Arduino.h"
|
||||
VPATH += $(TOP_DIR)/$(ARDUINO_CORES_DIR)
|
||||
|
||||
# for #include "pins_arduino.h"
|
||||
VPATH += $(TOP_DIR)/$(ARDUINO_DIR)/variants/leonardo
|
||||
|
|
@ -1,44 +0,0 @@
|
|||
#include "USBAPI.h"
|
||||
|
||||
|
||||
void NullSerial::begin(uint16_t baud_count)
|
||||
{
|
||||
}
|
||||
|
||||
void NullSerial::end(void)
|
||||
{
|
||||
}
|
||||
|
||||
void NullSerial::accept(void)
|
||||
{
|
||||
}
|
||||
|
||||
int NullSerial::available(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
int NullSerial::peek(void)
|
||||
{
|
||||
return -1;
|
||||
}
|
||||
|
||||
int NullSerial::read(void)
|
||||
{
|
||||
return -1;
|
||||
}
|
||||
|
||||
void NullSerial::flush(void)
|
||||
{
|
||||
}
|
||||
|
||||
size_t NullSerial::write(uint8_t c)
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
|
||||
NullSerial::operator bool() {
|
||||
return true;
|
||||
}
|
||||
|
||||
NullSerial Serial;
|
||||
|
|
@ -1,3 +1,8 @@
|
|||
USB HID protocol
|
||||
================
|
||||
Host side of USB HID keyboard protocol implementation.
|
||||
Only standard HID Boot mode is supported at this time. This means most of normal keyboards are supported while proprietary >6KRO and NKRO is not.
|
||||
|
||||
Third party Libraries
|
||||
---------------------
|
||||
USB_Host_Shield_2.0
|
||||
|
|
@ -7,3 +12,17 @@ USB_Host_Shield_2.0
|
|||
arduino-1.0.1
|
||||
Arduino files copied from:
|
||||
https://github.com/arduino/Arduino/hardware/arduino/{cores,variants}
|
||||
|
||||
|
||||
Test build
|
||||
----------
|
||||
In test directory;
|
||||
$ make
|
||||
$ DEV=/dev/ttyACM0 make program
|
||||
|
||||
You can see HID keyboard reports on debug output.
|
||||
|
||||
|
||||
Restriction and Bug
|
||||
-------------------
|
||||
Not statble yet.
|
||||
|
|
|
|||
|
|
@ -1,22 +0,0 @@
|
|||
/*
|
||||
* Override original arduino USBAPI.h.
|
||||
*/
|
||||
#include <stdint.h>
|
||||
#include "Stream.h"
|
||||
|
||||
|
||||
class NullSerial : public Stream
|
||||
{
|
||||
public:
|
||||
void begin(uint16_t baud_count);
|
||||
void end(void);
|
||||
|
||||
virtual int available(void);
|
||||
virtual void accept(void);
|
||||
virtual int peek(void);
|
||||
virtual int read(void);
|
||||
virtual void flush(void);
|
||||
virtual size_t write(uint8_t);
|
||||
operator bool();
|
||||
};
|
||||
extern NullSerial Serial;
|
||||
|
|
@ -16,8 +16,8 @@
|
|||
** SOFTWARE.
|
||||
*/
|
||||
|
||||
//#define CDC_ENABLED
|
||||
//#define HID_ENABLED
|
||||
#define CDC_ENABLED
|
||||
#define HID_ENABLED
|
||||
|
||||
|
||||
#ifdef CDC_ENABLED
|
||||
|
|
|
|||
|
|
@ -108,7 +108,6 @@ unsigned long micros() {
|
|||
|
||||
void delay(unsigned long ms)
|
||||
{
|
||||
//PORTB &= ~(1<<0);
|
||||
uint16_t start = (uint16_t)micros();
|
||||
|
||||
while (ms > 0) {
|
||||
|
|
@ -117,7 +116,6 @@ void delay(unsigned long ms)
|
|||
start += 1000;
|
||||
}
|
||||
}
|
||||
//PORTB |= (1<<0);
|
||||
}
|
||||
|
||||
/* Delay for the given number of microseconds. Assumes a 8 or 16 MHz clock. */
|
||||
|
|
|
|||
|
|
@ -0,0 +1,10 @@
|
|||
#ifndef LEONARDO_LED_H
|
||||
#define LEONARDO_LED_H
|
||||
|
||||
// Leonardo "TX" LED for debug
|
||||
#define LED_TX_INIT (DDRD |= (1<<5))
|
||||
#define LED_TX_ON (PORTD &= ~(1<<5))
|
||||
#define LED_TX_OFF (PORTD |= (1<<5))
|
||||
#define LED_TX_TOGGLE (PORTD ^= (1<<5))
|
||||
|
||||
#endif
|
||||
|
|
@ -1,66 +0,0 @@
|
|||
#include <util/delay.h>
|
||||
#include <Arduino.h>
|
||||
#include "Usb.h"
|
||||
#include "hid.h"
|
||||
#include "hidboot.h"
|
||||
#include "parser.h"
|
||||
|
||||
|
||||
USB Usb;
|
||||
HIDBoot<HID_PROTOCOL_KEYBOARD> kbd(&Usb);
|
||||
KBDReportParser Prs;
|
||||
|
||||
void usb_disable()
|
||||
{
|
||||
USBCON &= ~(1<<VBUSTI);
|
||||
UDIEN = 0;
|
||||
USBINT = 0;
|
||||
UDINT = 0;
|
||||
UDCON |= (1<<DETACH);
|
||||
USBCON &= ~(1<<USBE);
|
||||
PLLCSR = 0;
|
||||
UHWCON &= ~(1<<UVREGE);
|
||||
USBCON &= ~(1<<OTGPADE);
|
||||
}
|
||||
|
||||
void setup()
|
||||
{
|
||||
usb_disable();
|
||||
|
||||
// RX LED for debug
|
||||
DDRB |= (1<<0);
|
||||
|
||||
Serial.begin( 115200 );
|
||||
while (!Serial) ;
|
||||
|
||||
delay( 1000 );
|
||||
|
||||
Serial.println("Start");
|
||||
|
||||
if (Usb.Init() == -1) {
|
||||
Serial.println("OSC did not start.");
|
||||
}
|
||||
|
||||
delay( 200 );
|
||||
|
||||
kbd.SetReportParser(0, (HIDReportParser*)&Prs);
|
||||
}
|
||||
|
||||
void loop()
|
||||
{
|
||||
Usb.Task();
|
||||
}
|
||||
|
||||
int main(void)
|
||||
{
|
||||
// arduino/wiring.c(Timer initialize)
|
||||
init();
|
||||
|
||||
setup();
|
||||
|
||||
for (;;) {
|
||||
loop();
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -0,0 +1,51 @@
|
|||
/*
|
||||
* Null implementation of Serial to dump debug print into blackhole
|
||||
*/
|
||||
#include "Arduino.h"
|
||||
#include "sendchar.h"
|
||||
|
||||
#include "USBAPI.h"
|
||||
|
||||
|
||||
void Serial_::begin(uint16_t baud_count)
|
||||
{
|
||||
}
|
||||
|
||||
void Serial_::end(void)
|
||||
{
|
||||
}
|
||||
|
||||
void Serial_::accept(void)
|
||||
{
|
||||
}
|
||||
|
||||
int Serial_::available(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
int Serial_::peek(void)
|
||||
{
|
||||
return -1;
|
||||
}
|
||||
|
||||
int Serial_::read(void)
|
||||
{
|
||||
return -1;
|
||||
}
|
||||
|
||||
void Serial_::flush(void)
|
||||
{
|
||||
}
|
||||
|
||||
size_t Serial_::write(uint8_t c)
|
||||
{
|
||||
sendchar(c);
|
||||
return 1;
|
||||
}
|
||||
|
||||
Serial_::operator bool() {
|
||||
return true;
|
||||
}
|
||||
|
||||
Serial_ Serial;
|
||||
|
|
@ -0,0 +1,28 @@
|
|||
/*
|
||||
* To keep Timer0 for common/timer.c override arduino/wiring.c.
|
||||
*/
|
||||
#include <util/delay.h>
|
||||
#include "common/timer.h"
|
||||
#include "Arduino.h"
|
||||
|
||||
|
||||
unsigned long millis()
|
||||
{
|
||||
return timer_read();
|
||||
}
|
||||
unsigned long micros()
|
||||
{
|
||||
return timer_read() * 1000UL;
|
||||
}
|
||||
void delay(unsigned long ms)
|
||||
{
|
||||
_delay_ms(ms);
|
||||
}
|
||||
void delayMicroseconds(unsigned int us)
|
||||
{
|
||||
_delay_us(us);
|
||||
}
|
||||
void init()
|
||||
{
|
||||
timer_init();
|
||||
}
|
||||
|
|
@ -1,15 +1,14 @@
|
|||
#include "parser.h"
|
||||
#include "leonardo_led.h"
|
||||
#include "debug.h"
|
||||
|
||||
void KBDReportParser::Parse(HID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf)
|
||||
{
|
||||
PORTB ^= (1<<0);
|
||||
/*
|
||||
Serial.print("KBDReport: ");
|
||||
LED_TX_TOGGLE;
|
||||
debug("KBDReport: ");
|
||||
for (uint8_t i = 0; i < len; i++) {
|
||||
PrintHex<uint8_t>(buf[i]);
|
||||
Serial.print(" ");
|
||||
debug_hex(buf[i]);
|
||||
debug(" ");
|
||||
}
|
||||
Serial.print("\r\n");
|
||||
*/
|
||||
//PORTC &= ~(1<<7);
|
||||
debug("\r\n");
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,3 +1,6 @@
|
|||
#ifndef PARSER_H
|
||||
#define PARSER_H
|
||||
|
||||
#include "hid.h"
|
||||
|
||||
class KBDReportParser : public HIDReportParser
|
||||
|
|
@ -5,3 +8,5 @@ class KBDReportParser : public HIDReportParser
|
|||
public:
|
||||
virtual void Parse(HID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf);
|
||||
};
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -39,7 +39,9 @@
|
|||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = usbkbd
|
||||
TARGET = usb_hid_test
|
||||
|
||||
TOP_DIR = ../../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
|
@ -63,79 +65,62 @@ F_CPU = 16000000
|
|||
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
# Interrupt driven control endpoint task
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
ARDUINO_DIR = arduino-1.0.1/cores
|
||||
ARDUINO_SRC = \
|
||||
arduino/Print.cpp \
|
||||
arduino/Stream.cpp \
|
||||
arduino/wiring.c
|
||||
|
||||
# arduino/main.cpp \
|
||||
# arduino/USBCore.cpp \
|
||||
# arduino/CDC.cpp \
|
||||
# arduino/HID.cpp \
|
||||
# arduino/HardwareSerial.cpp \
|
||||
# arduino/IPAddress.cpp \
|
||||
# arduino/Tone.cpp \
|
||||
# arduino/WMath.cpp \
|
||||
# arduino/WInterrupts.c \
|
||||
# arduino/wiring_analog.c \
|
||||
# arduino/wiring_pulse.c \
|
||||
# arduino/wiring_shift.c
|
||||
# arduino/wiring_digital.c \
|
||||
# arduino/WString.cpp \
|
||||
# arduino/new.cpp \
|
||||
|
||||
USB_HOST_DIR = ./USB_Host_Shield_2.0
|
||||
USB_HOST_SRC = \
|
||||
Usb.cpp \
|
||||
cdcacm.cpp \
|
||||
cdcftdi.cpp \
|
||||
cdcprolific.cpp \
|
||||
hid.cpp \
|
||||
hidboot.cpp \
|
||||
hiduniversal.cpp \
|
||||
hidusagetitlearrays.cpp \
|
||||
hidescriptorparser.cpp \
|
||||
message.cpp \
|
||||
parsetools.cpp
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
# Console for debug
|
||||
OPT_DEFS += -DCONSOLE_ENABLE
|
||||
|
||||
#PS3BT.cpp \
|
||||
#PS3USB.cpp \
|
||||
#RFCOMM.cpp \
|
||||
#XBOXUSB.cpp \
|
||||
#adk.cpp \
|
||||
#masstorage.cpp \
|
||||
#max_LCD.cpp \
|
||||
#usbhub.cpp
|
||||
# Boot Section Size in bytes
|
||||
# Teensy halfKay 512
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
#OPT_DEFS += -DBOOT_SIZE=4096
|
||||
|
||||
|
||||
|
||||
SRC = test.cpp
|
||||
SRC += common/debug.c
|
||||
SRC += common/print.c
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
#SRC = host_kbd.cpp
|
||||
SRC = main.cpp
|
||||
SRC += parser.cpp
|
||||
SRC += NullSerial.cpp
|
||||
SRC += $(USB_HOST_SRC)
|
||||
SRC += $(ARDUINO_SRC)
|
||||
|
||||
OPT_DEFS = -DARDUINO=101 -DUSB_VID=0x2341 -DUSB_PID=0x8036
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(USB_HOST_DIR)
|
||||
VPATH += $(ARDUINO_DIR)
|
||||
# for Arduino.h
|
||||
VPATH += arduino-1.0.1/cores/arduino
|
||||
# for pins_arduino.h
|
||||
VPATH += arduino-1.0.1/variants/leonardo
|
||||
VPATH += $(TOP_DIR)
|
||||
VPATH += $(TOP_DIR)/common
|
||||
|
||||
|
||||
# Ad hoc workaround to override original arduino/USBAPI.h with our own USBAPI.h.
|
||||
# Obsolete but needed in order to remove directory including the current input file from search list.
|
||||
# Option -iquote can't replace -I- for this purpose.
|
||||
EXTRAFLAGS += -I-
|
||||
|
||||
|
||||
# program Leonardo
|
||||
PROGRAM_CMD = avrdude -patmega32u4 -cavr109 -P$(DEV) -b57600 -Uflash:w:$(TARGET).hex
|
||||
PROGRAM_CMD = avrdude -p$(MCU) -cavr109 -P$(DEV) -b57600 -Uflash:w:$(TARGET).hex
|
||||
|
||||
|
||||
include ../../rules.mk
|
||||
|
||||
include $(TOP_DIR)/protocol/usb_hid.mk
|
||||
include $(TOP_DIR)/protocol/lufa.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
|
|
@ -0,0 +1,40 @@
|
|||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0xCAFE
|
||||
#define DEVICE_VER 0x0814
|
||||
#define MANUFACTURER t.m.k.
|
||||
#define PRODUCT USB to USB keyboard converter
|
||||
|
||||
|
||||
#define DESCRIPTION Product from t.m.k. keyboard firmware project
|
||||
|
||||
|
||||
/* matrix size */
|
||||
#define MATRIX_ROWS 32
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)))
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,92 @@
|
|||
#include <avr/io.h>
|
||||
#include <avr/wdt.h>
|
||||
#include <avr/power.h>
|
||||
#include <util/delay.h>
|
||||
#include <Arduino.h>
|
||||
|
||||
// USB HID host
|
||||
#include "Usb.h"
|
||||
#include "hid.h"
|
||||
#include "hidboot.h"
|
||||
#include "parser.h"
|
||||
|
||||
// LUFA
|
||||
#include "lufa.h"
|
||||
|
||||
#include "debug.h"
|
||||
|
||||
#include "leonardo_led.h"
|
||||
|
||||
|
||||
static USB usb_host;
|
||||
static HIDBoot<HID_PROTOCOL_KEYBOARD> kbd(&usb_host);
|
||||
static KBDReportParser kbd_parser;
|
||||
|
||||
static void LUFA_setup(void)
|
||||
{
|
||||
/* Disable watchdog if enabled by bootloader/fuses */
|
||||
MCUSR &= ~(1 << WDRF);
|
||||
wdt_disable();
|
||||
|
||||
/* Disable clock division */
|
||||
clock_prescale_set(clock_div_1);
|
||||
|
||||
// Leonardo needs. Without this USB device is not recognized.
|
||||
USB_Disable();
|
||||
|
||||
USB_Init();
|
||||
|
||||
// for Console_Task
|
||||
USB_Device_EnableSOFEvents();
|
||||
}
|
||||
|
||||
static void HID_setup()
|
||||
{
|
||||
// Arduino Timer startup: wiring.c
|
||||
init();
|
||||
|
||||
if (usb_host.Init() == -1) {
|
||||
debug("HID init: failed\n");
|
||||
LED_TX_OFF;
|
||||
}
|
||||
|
||||
_delay_ms(200);
|
||||
|
||||
kbd.SetReportParser(0, (HIDReportParser*)&kbd_parser);
|
||||
}
|
||||
|
||||
int main(void)
|
||||
{
|
||||
// LED for debug
|
||||
LED_TX_INIT;
|
||||
LED_TX_ON;
|
||||
|
||||
print_enable = true;
|
||||
debug_enable = true;
|
||||
debug_matrix = true;
|
||||
debug_keyboard = true;
|
||||
debug_mouse = true;
|
||||
|
||||
LUFA_setup();
|
||||
sei();
|
||||
|
||||
// wait for startup of sendchar routine
|
||||
while (USB_DeviceState != DEVICE_STATE_Configured) ;
|
||||
if (debug_enable) {
|
||||
_delay_ms(1000);
|
||||
}
|
||||
|
||||
HID_setup();
|
||||
|
||||
debug("init: done\n");
|
||||
for (;;) {
|
||||
usb_host.Task();
|
||||
|
||||
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
|
||||
// LUFA Task for control request
|
||||
USB_USBTask();
|
||||
#endif
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
9
rules.mk
9
rules.mk
|
|
@ -187,6 +187,7 @@ endif
|
|||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
|
||||
# dump that will be displayed for a given single line of source input.
|
||||
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
|
||||
ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
||||
ifdef CONFIG_H
|
||||
ASFLAGS += -include $(CONFIG_H)
|
||||
endif
|
||||
|
|
@ -345,9 +346,9 @@ GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
|
|||
# Combine all necessary flags and optional flags.
|
||||
# Add target processor to flags.
|
||||
# You can give extra flags at 'make' command line like: make EXTRAFLAGS=-DFOO=bar
|
||||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
|
||||
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
|
||||
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
|
||||
ALL_CFLAGS = -mmcu=$(MCU) $(CFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
|
||||
ALL_CPPFLAGS = -mmcu=$(MCU) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
|
||||
ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
|
||||
|
||||
|
||||
|
||||
|
|
@ -569,7 +570,7 @@ $(OBJDIR)/%.o : %.S
|
|||
|
||||
# Create preprocessed source for use in sending a bug report.
|
||||
%.i : %.c
|
||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
|
||||
$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Target: clean project.
|
||||
|
|
|
|||
Loading…
Reference in New Issue