localhots
/
qmk_firmware
1
0
Fork 0
Code Releases Activity

Helix serial.c re-adjust compiler depend value of delay (#4269) 

* Helix serial.c add debug code

* re-adjust READ_WRITE_WIDTH_ADJUST values

* re-adjust READ_WRITE_START_ADJUST values

* re-adjust TID_SEND_ADJUST value

* Helix serial.c: remove debug code
This commit is contained in:
Takeshi ISHII 2018-10-29 02:12:44 +09:00 committed by Drashna Jaelre
parent c60a312ba9
commit 8517f8a660
2 changed files with 44 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
keyboards/helix/rev2/split_scomm.c
View File

@ -7,9 +7,6 @@
#include <stddef.h>
#include <split_scomm.h>
#include "serial.h"
#ifdef SERIAL_DEBUG_MODE
#include <avr/io.h>
#endif
#ifdef CONSOLE_ENABLE
#include <print.h>
#endif

40
keyboards/helix/serial.c
View File

@ -136,38 +136,68 @@ int serial_update_buffers()
// 5: about 20kbps
#endif
#define TID_SEND_ADJUST 2
#if __GNUC__ < 6
#define TID_SEND_ADJUST 14
#else
#define TID_SEND_ADJUST 2
#endif
#if SELECT_SOFT_SERIAL_SPEED == 0
// Very High speed
#define SERIAL_DELAY 4 // micro sec
#if __GNUC__ < 6
#define READ_WRITE_START_ADJUST 33 // cycles
#define READ_WRITE_WIDTH_ADJUST 6 // cycles
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
#else
#define READ_WRITE_START_ADJUST 34 // cycles
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
#endif
#elif SELECT_SOFT_SERIAL_SPEED == 1
// High speed
#define SERIAL_DELAY 6 // micro sec
#if __GNUC__ < 6
#define READ_WRITE_START_ADJUST 30 // cycles
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
#else
#define READ_WRITE_START_ADJUST 33 // cycles
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
#endif
#elif SELECT_SOFT_SERIAL_SPEED == 2
// Middle speed
#define SERIAL_DELAY 12 // micro sec
#define READ_WRITE_START_ADJUST 30 // cycles
#if __GNUC__ < 6
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
#else
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
#endif
#elif SELECT_SOFT_SERIAL_SPEED == 3
// Low speed
#define SERIAL_DELAY 24 // micro sec
#define READ_WRITE_START_ADJUST 30 // cycles
#if __GNUC__ < 6
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
#else
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
#endif
#elif SELECT_SOFT_SERIAL_SPEED == 4
// Very Low speed
#define SERIAL_DELAY 36 // micro sec
#define READ_WRITE_START_ADJUST 30 // cycles
#if __GNUC__ < 6
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
#else
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
#endif
#elif SELECT_SOFT_SERIAL_SPEED == 5
// Ultra Low speed
#define SERIAL_DELAY 48 // micro sec
#define READ_WRITE_START_ADJUST 30 // cycles
#if __GNUC__ < 6
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
#else
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
#endif
#else
#error invalid SELECT_SOFT_SERIAL_SPEED value
#endif /* SELECT_SOFT_SERIAL_SPEED */
@ -187,16 +217,19 @@ int serial_update_buffers()
static SSTD_t *Transaction_table = NULL;
static uint8_t Transaction_table_size = 0;
inline static void serial_delay(void) ALWAYS_INLINE;
inline static
void serial_delay(void) {
_delay_us(SERIAL_DELAY);
}
inline static void serial_delay_half1(void) ALWAYS_INLINE;
inline static
void serial_delay_half1(void) {
_delay_us(SERIAL_DELAY_HALF1);
}
inline static void serial_delay_half2(void) ALWAYS_INLINE;
inline static
void serial_delay_half2(void) {
_delay_us(SERIAL_DELAY_HALF2);
@ -216,6 +249,7 @@ void serial_input_with_pullup(void) {
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
}
inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
inline static
uint8_t serial_read_pin(void) {
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
@ -270,7 +304,7 @@ void sync_recv(void) {
}
// Used by the reciver to send a synchronization signal to the sender.
static void sync_send(void)NO_INLINE;
static void sync_send(void) NO_INLINE;
static
void sync_send(void) {
serial_low();