localhots
/
qmk_firmware
1
0
Fork 0
Code Releases Activity

Merge pull request #1349 from jpetermans/infinity60 

Infinity60 backlight support
This commit is contained in:
Jack Humbert 2017-06-18 12:38:38 -04:00 committed by GitHub
parent dd73e14c9b 9af272e4bb
commit 517f75d893
11 changed files with 1056 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
keyboards/infinity60/config.h
View File

@ -54,7 +54,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define INFINITY_PROTOTYPE //#define INFINITY_PROTOTYPE
/* Keymap for Infinity 1.1a (first revision with LED support) */ /* Keymap for Infinity 1.1a (first revision with LED support) */
//#define INFINITY_LED #define INFINITY_LED
/* /*
* Feature disable options * Feature disable options

4
keyboards/infinity60/halconf.h
View File

@ -76,7 +76,7 @@
* @brief Enables the I2C subsystem. * @brief Enables the I2C subsystem.
*/ */
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C FALSE #define HAL_USE_I2C TRUE
#endif #endif
/** /**
@ -139,7 +139,7 @@
* @brief Enables the SERIAL over USB subsystem. * @brief Enables the SERIAL over USB subsystem.
*/ */
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) #if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB TRUE #define HAL_USE_SERIAL_USB FALSE
#endif #endif
/** /**

4
keyboards/infinity60/keymaps/jpetermans/Makefile Normal file
View File

@ -0,0 +1,4 @@
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

11
keyboards/infinity60/keymaps/jpetermans/config.h Normal file
View File

@ -0,0 +1,11 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
//overrides
#undef TAPPING_TOGGLE
#define TAPPING_TOGGLE 2
#endif

304
keyboards/infinity60/keymaps/jpetermans/keymap.c Normal file
View File

@ -0,0 +1,304 @@
#include "infinity60.h"
#include "led_controller.h"
//Helpful Defines
#define _______ KC_TRNS
//Define Layer Names
#define _BASE 0
#define _NUMPAD 1
#define _FNAV 2
#define _MEDIA 3
#define _TILDE 4
//IS31 chip has 8 available led pages, using 0 for all leds and 7 for single toggles
#define max_pages 6
enum ic60_keycodes {
NUMPAD,
FNAV,
MEDIA,
TILDE,
CTLALTDEL,
BACKLIGHT,
BRIGHT,
DIM,
ALL,
GAME,
MODE_SINGLE,
MODE_PAGE,
MODE_FLASH
};
uint8_t current_layer_global = 0;
uint8_t led_mode_global = MODE_SINGLE;
uint8_t backlight_status_global = 1; //init on/off state of backlight
uint32_t led_layer_state = 0;
/* ==================================
* KEYMAPS
* ==================================*/
const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Layer 0: Default Layer
* ,-----------------------------------------------------------.
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Backs|
* |-----------------------------------------------------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
* |-----------------------------------------------------------|
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Enter |
* |-----------------------------------------------------------|
* |Shif| | Z| X| C| V| B| N| M| ,| .| /|Shift |
* |-----------------------------------------------------------|
* |Ctrl|Gui |Alt | Space |Alt |Gui | FN | Ctrl |
* `-----------------------------------------------------------'
*/
/* default */
[_BASE] = KEYMAP( \
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS,KC_NO,\
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, \
TT(_FNAV), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,F(TILDE),KC_NO, \
KC_LCTL, KC_LGUI,KC_LALT, LT(_FNAV, KC_SPC), KC_RALT,TG(_NUMPAD),MO(_MEDIA), KC_RCTL \
),
/* numpad */
[_NUMPAD] = KEYMAP( \
_______,_______,_______,_______,_______,_______,_______, KC_P7, KC_P8, KC_P9, KC_PSLS, _______,_______,_______,KC_NO,\
_______,_______,_______,_______,_______,_______,_______, KC_P4, KC_P5, KC_P6, KC_PAST, _______,_______,_______, \
MO(_FNAV),_______,_______,_______,_______,_______,_______, KC_P1, KC_P2, KC_P3, KC_PMNS, _______,_______, \
_______,_______,_______,_______,_______,_______,_______, KC_P0,KC_COMM,KC_PDOT,KC_PPLS, _______,KC_NO, \
_______,_______,_______, TO(_BASE), _______,_______,_______,_______ \
),
/* F-, arrow, and media keys */
[_FNAV] = KEYMAP( \
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_NO,\
KC_CAPS,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,_______,_______,KC_DEL, \
_______,_______,KC_BTN2,_______,_______,_______,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,_______,_______, \
_______,KC_APP,KC_BTN1,KC_CALC,_______,_______,KC_END,_______,_______,_______,_______,_______,KC_NO, \
_______,_______,_______, _______, F(CTLALTDEL),KC_NLCK,_______,_______ \
),
/* media */
[_MEDIA] = KEYMAP( \
_______,F(MODE_SINGLE),F(MODE_PAGE),F(MODE_FLASH),_______,_______,_______, _______, _______, _______,KC_MUTE, KC_VOLD, KC_VOLU,_______,KC_NO,\
_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,\
_______,_______,_______,_______,_______,F(GAME),_______, _______, _______, _______,_______, _______,_______, \
_______,_______,F(ALL) ,F(BRIGHT),F(DIM),F(BACKLIGHT),_______, _______, KC_MPRV, KC_MNXT,KC_MSTP, _______,KC_NO, \
_______,_______,_______, KC_MPLY, _______,_______, _______,_______ \
),
/* ~ */
[_TILDE] = KEYMAP( \
KC_GRV,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,KC_NO,\
_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,\
_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______, \
_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,KC_NO, \
_______,_______,_______, _______, _______,_______, _______,_______ \
),
/* template */
[5] = KEYMAP( \
_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,KC_NO,\
_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,\
_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______, \
_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,KC_NO, \
_______,_______,_______, _______, _______,_______, _______,_______ \
),
};
//id for user defined functions and macros
enum function_id {
NONE,
};
enum macro_id {
ACTION_LEDS_ALL,
ACTION_LEDS_GAME,
ACTION_LEDS_BACKLIGHT,
ACTION_LEDS_BRIGHT,
ACTION_LEDS_DIM,
ACTION_LEDS_SINGLE,
ACTION_LEDS_PAGE,
ACTION_LEDS_FLASH
};
/* ==================================
* LED MAPPING
* ==================================*/
/*
Infinity60 LED MAP
11 12 13 14 15 16 17 18 21 22 23 24 25 26 27*
28 31 32 33 34 35 36 37 38 41 42 43 44 45
46 47 48 51 52 53 54 55 56 57 58 61 62
63 64 65 66 67 68 71 72 73 74 75 76 77*
78 81 82 83 84 85 86 87
*Unused in Alphabet Layout
*/
//======== full page arrays =========
//any change in array size needs to be mirrored in matrix_init_user
uint8_t led_numpad[16] = {
18,21,22,23,
37,38,41,42,
55,56,57,58,
72,73,74,75
};
//LED Page 2 - _Nav
uint8_t led_nav[12] = {
38,
47,48, 55,56,57,
64,65,66
};
//LED Page 3 - _Media
uint8_t led_media[15] = {
12,13,14, 23,24,25,
65,66,67,68, 73,74,75,
83, 86
};
//LED Page 4 - _Game "WASD"
uint8_t led_game[5] = {
11,
32,
47,48,51
};
//======== qmk functions =========
const uint16_t fn_actions[] = {
[CTLALTDEL] = ACTION_KEY(LALT(LCTL(KC_DEL))),
[TILDE] = ACTION_LAYER_MODS(_TILDE, MOD_LSFT),
[ALL] = ACTION_FUNCTION(ACTION_LEDS_ALL),
[GAME] = ACTION_FUNCTION(ACTION_LEDS_GAME),
[BACKLIGHT] = ACTION_FUNCTION(ACTION_LEDS_BACKLIGHT),
[BRIGHT] = ACTION_FUNCTION(ACTION_LEDS_BRIGHT),
[DIM] = ACTION_FUNCTION(ACTION_LEDS_DIM),
[MODE_SINGLE] = ACTION_FUNCTION(ACTION_LEDS_SINGLE),
[MODE_PAGE] = ACTION_FUNCTION(ACTION_LEDS_PAGE),
[MODE_FLASH] = ACTION_FUNCTION(ACTION_LEDS_FLASH),
};
/* custom action function */
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
msg_t msg;
switch(id) {
case ACTION_LEDS_ALL:
if(record->event.pressed) {
led_mode_global = led_mode_global == ALL ? MODE_SINGLE : ALL;
msg=TOGGLE_ALL;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
}
break;
case ACTION_LEDS_BACKLIGHT:
if(record->event.pressed) {
backlight_status_global ^= 1;
msg=(backlight_status_global << 8) | TOGGLE_BACKLIGHT;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
}
break;
case ACTION_LEDS_GAME:
if(record->event.pressed) {
led_mode_global = led_mode_global == GAME ? MODE_SINGLE : GAME;
msg=(4 << 8) | DISPLAY_PAGE;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
}
break;
case ACTION_LEDS_BRIGHT:
if(record->event.pressed) {
msg=(1 << 8) | STEP_BRIGHTNESS;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
}
break;
case ACTION_LEDS_DIM:
if(record->event.pressed) {
msg=(0 << 8) | STEP_BRIGHTNESS;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
}
break;
//set led_mode for matrix_scan to toggle leds
case ACTION_LEDS_SINGLE:
led_mode_global = MODE_SINGLE;
break;
case ACTION_LEDS_PAGE:
led_mode_global = MODE_PAGE;
break;
case ACTION_LEDS_FLASH:
led_mode_global = MODE_FLASH;
break;
}
}
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
return MACRO_NONE;
};
bool process_record_user (uint16_t keycode, keyrecord_t *record) {
return true;
}
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
led_controller_init();
// Write predefined led pages.
write_led_page(_NUMPAD, led_numpad, 16);
chThdSleepMilliseconds(10);
write_led_page(_FNAV, led_nav, 12);
chThdSleepMilliseconds(10);
write_led_page(_MEDIA, led_media, 15);
chThdSleepMilliseconds(10);
write_led_page(4, led_game, 5);
chThdSleepMilliseconds(1000);
};
// Loops constantly in the background.
void matrix_scan_user(void) {
uint8_t page;
uint8_t led_pin_byte;
msg_t msg;
if (backlight_status_global == 0) {//backlight is off, skip the rest
return;
}
if (led_layer_state != layer_state && led_mode_global != GAME && led_mode_global != ALL) {
//check mode
//Turn on layer indicator or page depending on mode
switch(led_mode_global) {
case MODE_FLASH: //flash preset page leds then single indicator
page = biton32(layer_state) > max_pages ? 7 : biton32(layer_state);
msg=(page << 8) | DISPLAY_PAGE;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
chThdSleepMilliseconds(500);
//flow to display single layer leds
case MODE_SINGLE: //light layer indicators for all active layers
led_pin_byte = layer_state & 0xFF;
msg=(7 << 8) | DISPLAY_PAGE;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
msg=(1 << 16) | (led_pin_byte << 8) | SET_FULL_ROW;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
break;
case MODE_PAGE: //display pre-defined led page
page = biton32(layer_state) > max_pages ? 7 : biton32(layer_state);
msg=(page << 8) | DISPLAY_PAGE;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
break;
}
led_layer_state = layer_state;
}
}

87
keyboards/infinity60/keymaps/jpetermans/readme.md Normal file
View File

@ -0,0 +1,87 @@
Backlight for Infinity60
========================
## Led Controller Specs
The Infinity60 (revision 1.1a) pcb uses the IS31FL3731C matrix LED driver from ISSI [(datasheet)](http://www.issi.com/WW/pdf/31FL3731C.pdf). The IS31 has the ability to control two led matrices (A & B), each matrix controlling 9 pins, each pin controlling 8 leds. The Infinity only utilizes matrix A.
Infinity60 LED Map:
digits mean "row" and "col", i.e. 45 means pin 4, column 5 in the IS31 datasheet
```c
11 12 13 14 15 16 17 18 21 22 23 24 25 26 27*
28 31 32 33 34 35 36 37 38 41 42 43 44 45
46 47 48 51 52 53 54 55 56 57 58 61 62
63 64 65 66 67 68 71 72 73 74 75 76 77*
78 81 82 83 84 85 86 87
```
*Unused in Alphabet Layout
The IS31 includes 8 led pages (or frames) 0-7 than can be displayed, and each page consists of 144 bytes.
- **bytes 0 - 17** - LED control (on/off).
* 18 pins which alternate between A and B matrices (A1, B1, A2, B2, ..).
* Each byte controls the 8 leds on that pin with bits (8 to 1).
- **bytes 8 - 35** - Blink control.
* Same as LED control above, but sets blink on/off.
- **bytes 36 - 143** - PWM control.
* One byte per LED, sets PWM from 0 to 255.
* Same as above, the register alternates, every 8 *bytes* (not bits) between the A & B matrices.
## Led Controller Code
In the Infinity60 project folder, led_controller.c sets up ability to write led layers at startup or control leds on demand as part of fn_actions. By default led_controller.c assumes page 0 will be used for full on/off. The remaining 7 pages (1-7) are free for preset led maps or single led actions at init or on demand. Communication with the IS31 is primarily done through the led_mailbox using chMBPost described further below under "Sending messages in Keymap.c". This code is based on work matt3o and flabbergast did for tmk firmware on the [whitefox](https://github.com/tmk/whitefox).
One function is available to directly set leds without the mailbox:
```
write_led_page(page#, array of leds by address, # of addresses in array)
```
This function saves a full page to the controller using a supplied array of led locations such as:
```c
uint8_t led_numpad[16] = {
18,21,22,23,
37,38,41,42,
55,56,57,58,
72,73,74,75
}
write_led_page(5, led_numpad, 16);
```
Remaining led control is done through the led mailbox using these message types:
- **SET_FULL_ROW** (3 bytes) - message type, 8-bit mask, and row#. Sets all leds on one pin per the bit mask.
- **OFF_LED, ON_LED, TOGGLE_LED** (3 bytes) - message type, led address, and page#. Off/on/toggle specific led.
- **BLINK_OFF_LED, BLINK_ON_LED, BLINK_OFF_LED** (3 bytes) - message type, led address, and page#. Set blink Off/on/toggle for specific led.
- **TOGGLE_ALL** (1 byte) - Turn on/off full backlight.
- **TOGGLE_BACKLIGHT** (2 bytes) - message type, on/off. Sets backlight completely off, no leds will display.
- **DISPLAY_PAGE** (2 bytes) - message type, page to display. Switch to specific pre-set page.
- **RESET_PAGE** (2 bytes) - message type, page to reset. Reset/erase specific page.
- **TOGGLE_NUM_LOCK** (2 bytes) - message type, on/off (NUM_LOCK_LED_ADDRESS). Toggle numlock on/off. Usually run with the `set_leds` function to check state of numlock or capslock. If all leds are on (e.i. TOGGLE_ALL) then this sets numlock to blink instead (this is still a little buggy if toggling on/off quickly).
- **TOGGLE_CAPS_LOCK** (2 bytes) - message type, on/off (CAPS_LOCK_LED_ADDRESS). Same as numlock.
- **STEP_BRIGHTNESS** (2 bytes) - message type, and step up (1) or step down (0). Increase or decrease led brightness.
## Sending messages in Keymap.c
Sending an action to the led mailbox is done using chMBPost:
```
chMBPost(&led_mailbox, message, timeout);
```
- &led_mailbox - pointer to led mailbox
- message - up to 4 bytes but most messages use only 2. First byte (LSB) is the message type, the remaining three bytes are the message to process.
- timeout is TIME_IMMEDIATE
An example:
```c
//set the message to be sent. First byte (LSB) is the led address, and second is the message type
msg=(42 << 8) | ON_LED;
//send msg to the led mailbox
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
```
Another:
```c
msg=(46 << 8) | BLINK_TOGGLE_LED;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
```
Finally, SET_FULL_ROW requires an extra byte with row information in the message so sending this message looks like:
```c
msg=(row<<16) | (led_pin_byte << 8) | SET_FULL_ROW;
chMBPost(&led_mailbox, msg, TIME_IMMEDIATE);
```

31
keyboards/infinity60/led.c
View File

@ -1,5 +1,5 @@
/* /*
Copyright 2012 Jun Wako <wakojun@gmail.com> Copyright 2015 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by it under the terms of the GNU General Public License as published by
@ -19,6 +19,35 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "led.h" #include "led.h"
#include "led_controller.h"
/* WARNING! This function needs to be callable from
* both regular threads and ISRs, unlocked (during resume-from-sleep).
* In particular, I2C functions (interrupt-driven) should NOT be called from here.
*/
void led_set(uint8_t usb_led) { void led_set(uint8_t usb_led) {
msg_t msg;
if (usb_led & (1<<USB_LED_NUM_LOCK)) {
chSysUnconditionalLock();
msg=(1 << 8) | TOGGLE_NUM_LOCK;
chMBPostI(&led_mailbox, msg);
chSysUnconditionalUnlock();
} else {
chSysUnconditionalLock();
msg=(0 << 8) | TOGGLE_NUM_LOCK;
chMBPostI(&led_mailbox, msg);
chSysUnconditionalUnlock();
}
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
chSysUnconditionalLock();
msg=(1 << 8) | TOGGLE_CAPS_LOCK;
chMBPostI(&led_mailbox, msg);
chSysUnconditionalUnlock();
} else {
chSysUnconditionalLock();
msg=(0 << 8) | TOGGLE_CAPS_LOCK;
chMBPostI(&led_mailbox, msg);
chSysUnconditionalUnlock();
}
} }

486
keyboards/infinity60/led_controller.c Normal file
View File

@ -0,0 +1,486 @@
/*
Copyright 2016 flabbergast <s3+flabbergast@sdfeu.org>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* LED controller code
* IS31FL3731C matrix LED driver from ISSI
* datasheet: http://www.issi.com/WW/pdf/31FL3731C.pdf
*/
#include "ch.h"
#include "hal.h"
#include "print.h"
#include "led.h"
#include "host.h"
#include "led_controller.h"
#include "suspend.h"
#include "usb_main.h"
/* Infinity60 LED MAP
- digits mean "row" and "col", i.e. 45 means C4-5 in the IS31 datasheet, matrix A
11 12 13 14 15 16 17 18 21 22 23 24 25 26 27*
28 31 32 33 34 35 36 37 38 41 42 43 44 45
46 47 48 51 52 53 54 55 56 57 58 61 62
63 64 65 66 67 68 71 72 73 74 75 76 77*
78 81 82 83 84 85 86 87
*Unused in Alphabet Layout
*/
/*
each page has 0xB4 bytes
0 - 0x11: LED control (on/off):
order: CA1, CB1, CA2, CB2, .... (CA - matrix A, CB - matrix B)
CAn controls Cn-8 .. Cn-1 (LSbit)
0x12 - 0x23: blink control (like "LED control")
0x24 - 0xB3: PWM control: byte per LED, 0xFF max on
order same as above (CA 1st row (8bytes), CB 1st row (8bytes), ...)
*/
// Which LED should be used for CAPS LOCK indicator
#if !defined(CAPS_LOCK_LED_ADDRESS)
#define CAPS_LOCK_LED_ADDRESS 46
#endif
#if !defined(NUM_LOCK_LED_ADDRESS)
#define NUM_LOCK_LED_ADDRESS 85
#endif
/* Which LED should breathe during sleep */
#if !defined(BREATHE_LED_ADDRESS)
#define BREATHE_LED_ADDRESS CAPS_LOCK_LED_ADDRESS
#endif
/* =================
* ChibiOS I2C setup
* ================= */
static const I2CConfig i2ccfg = {
400000 // clock speed (Hz); 400kHz max for IS31
};
/* ==============
* variables
* ============== */
// internal communication buffers
uint8_t tx[2] __attribute__((aligned(2)));
uint8_t rx[1] __attribute__((aligned(2)));
// buffer for sending the whole page at once (used also as a temp buffer)
uint8_t full_page[0xB4+1] = {0};
// LED mask (which LEDs are present, selected by bits)
// IC60 pcb uses only CA matrix.
// Each byte is a control pin for 8 leds ordered 8-1
const uint8_t all_on_leds_mask[0x12] = {
0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF,
0x00, 0xFF, 0x00, 0xFF, 0x00, 0x7F, 0x00, 0x00, 0x00
};
// array to hold brightness pwm steps
const uint8_t pwm_levels[5] = {
0x00, 0x16, 0x4E, 0xA1, 0xFF
};
// array to write to pwm register
uint8_t pwm_register_array[9] = {0};
/* ============================
* communication functions
* ============================ */
msg_t is31_select_page(uint8_t page) {
tx[0] = IS31_COMMANDREGISTER;
tx[1] = page;
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, US2ST(IS31_TIMEOUT));
}
msg_t is31_write_data(uint8_t page, uint8_t *buffer, uint8_t size) {
is31_select_page(page);
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, buffer, size, NULL, 0, US2ST(IS31_TIMEOUT));
}
msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data) {
is31_select_page(page);
tx[0] = reg;
tx[1] = data;
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, US2ST(IS31_TIMEOUT));
}
msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result) {
is31_select_page(page);
tx[0] = reg;
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 1, result, 1, US2ST(IS31_TIMEOUT));
}
/* ========================
* initialise the IS31 chip
* ======================== */
void is31_init(void) {
// just to be sure that it's all zeroes
__builtin_memset(full_page,0,0xB4+1);
// zero function page, all registers (assuming full_page is all zeroes)
is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
// disable hardware shutdown
palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
palSetPad(GPIOB, 16);
chThdSleepMilliseconds(10);
// software shutdown
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
chThdSleepMilliseconds(10);
// zero function page, all registers
is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
chThdSleepMilliseconds(10);
// software shutdown disable (i.e. turn stuff on)
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
chThdSleepMilliseconds(10);
// zero all LED registers on all 8 pages
uint8_t i;
for(i=0; i<8; i++) {
is31_write_data(i, full_page, 0xB4 + 1);
chThdSleepMilliseconds(5);
}
}
/* ==================
* LED control thread
* ================== */
#define LED_MAILBOX_NUM_MSGS 5
static msg_t led_mailbox_queue[LED_MAILBOX_NUM_MSGS];
mailbox_t led_mailbox;
static THD_WORKING_AREA(waLEDthread, 256);
static THD_FUNCTION(LEDthread, arg) {
(void)arg;
chRegSetThreadName("LEDthread");
uint8_t i;
uint8_t control_register_word[2] = {0};//2 bytes: register address, byte to write
uint8_t led_control_reg[0x13] = {0};//led control register start address + 0x12 bytes
//persistent status variables
uint8_t pwm_step_status, page_status, capslock_status, numlock_status;
//mailbox variables
uint8_t temp, msg_type;
uint8_t msg_args[3];
msg_t msg;
// initialize persistent variables
pwm_step_status = 4; //full brightness
page_status = 0; //start frame 0 (all off/on)
numlock_status = (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? 1 : 0;
capslock_status = (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? 1 : 0;
while(true) {
// wait for a message (asynchronous)
// (messages are queued (up to LED_MAILBOX_NUM_MSGS) if they can't
// be processed right away
chMBFetch(&led_mailbox, &msg, TIME_INFINITE);
msg_type = msg & 0xFF; //first byte is action information
msg_args[0] = (msg >> 8) & 0xFF;
msg_args[1] = (msg >> 16) & 0XFF;
msg_args[2] = (msg >> 24) & 0xFF;
switch (msg_type){
case SET_FULL_ROW:
//write full byte to pin address, msg_args[1] = pin #, msg_args[0] = 8 bits to write
//writes only to currently displayed page
write_led_byte(page_status, msg_args[1], msg_args[0]);
break;
case OFF_LED:
//on/off/toggle single led, msg_args[0] = row/col of led, msg_args[1] = page
set_led_bit(msg_args[1], control_register_word, msg_args[0], 0);
break;
case ON_LED:
set_led_bit(msg_args[1], control_register_word, msg_args[0], 1);
break;
case TOGGLE_LED:
set_led_bit(msg_args[1], control_register_word, msg_args[0], 2);
break;
case BLINK_OFF_LED:
//on/off/toggle single led, msg_args[0] = row/col of led
set_led_bit(msg_args[1], control_register_word, msg_args[0], 4);
break;
case BLINK_ON_LED:
set_led_bit(msg_args[1], control_register_word, msg_args[0], 5);
break;
case BLINK_TOGGLE_LED:
set_led_bit(msg_args[1], control_register_word, msg_args[0], 6);
break;
case TOGGLE_ALL:
//turn on/off all leds, msg_args = unused
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
chThdSleepMilliseconds(5);
is31_read_register(0, 0x00, &temp);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
led_control_reg[0] = 0;
//toggle led mask based on current state (temp)
if (temp==0 || page_status > 0) {
__builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12);
} else {
__builtin_memset(led_control_reg+1, 0, 0x12);
}
is31_write_data(0, led_control_reg, 0x13);
if (page_status > 0) {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
page_status=0;
//maintain lock leds, reset to off and force recheck to blink of all leds toggled on
numlock_status = 0;
capslock_status = 0;
led_set(host_keyboard_leds());
}
break;
case TOGGLE_BACKLIGHT:
//msg_args[0] = on/off
//populate 9 byte rows to be written to each pin, first byte is register (pin) address
if (msg_args[0] == 1) {
__builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8);
} else {
__builtin_memset(pwm_register_array+1, 0, 8);
}
for(i=0; i<8; i++) {
//first byte is register address, every 0x10 9 bytes is A-matrix pwm pins
pwm_register_array[0] = 0x24 + (i * 0x10);
is31_write_data(0,pwm_register_array,9);
}
break;
case DISPLAY_PAGE:
//msg_args[0] = page to toggle on
if (page_status != msg_args[0]) {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_args[0]);
page_status = msg_args[0];
//maintain lock leds, reset to off and force recheck for new page
numlock_status = 0;
capslock_status = 0;
led_set(host_keyboard_leds());
}
break;
case RESET_PAGE:
//led_args[0] = page to reset
led_control_reg[0] = 0;
__builtin_memset(led_control_reg+1, 0, 0x12);
is31_write_data(msg_args[0], led_control_reg, 0x13);
//repeat for blink register
led_control_reg[0] = 0x12;
is31_write_data(msg_args[0], led_control_reg, 0x13);
break;
case TOGGLE_NUM_LOCK:
//msg_args[0] = 0 or 1, off/on
if (numlock_status != msg_args[0]) {
set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_args[0], page_status);
numlock_status = msg_args[0];
}
break;
case TOGGLE_CAPS_LOCK:
//msg_args[0] = 0 or 1, off/on
if (capslock_status != msg_args[0]) {
set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_args[0], page_status);
capslock_status = msg_args[0];
}
break;
case STEP_BRIGHTNESS:
//led_args[0] = step up (1) or down (0)
switch (msg_args[0]) {
case 0:
if (pwm_step_status == 0) {
pwm_step_status = 4;
} else {
pwm_step_status--;
}
break;
case 1:
if (pwm_step_status == 4) {
pwm_step_status = 0;
} else {
pwm_step_status++;
}
break;
}
//populate 8 byte arrays to write on each pin
//first byte is register address, every 0x10 9 bytes are A-matrix pwm pins
__builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8);
for(i=0; i<8; i++) {
pwm_register_array[0] = 0x24 + (i * 0x10);
is31_write_data(0,pwm_register_array,9);
}
break;
}
}
}
/* ==============================
* led processing functions
* ============================== */
void set_led_bit (uint8_t page, uint8_t *led_control_word, uint8_t led_addr, uint8_t action) {
//returns 2 bytes: led control register address and byte to write
//action: 0 - off, 1 - on, 2 - toggle, 4 - blink on, 5 - blink off, 6 - toggle blink
uint8_t control_reg_addr, column_bit, column_byte, temp, blink_bit;
//check for valid led address
if (led_addr < 0 || led_addr > 87 || led_addr % 10 > 8) {
return;
}
blink_bit = action>>2;//check for blink bit
action &= ~(1<<2); //strip blink bit
//led_addr tens column is pin#, ones column is bit position in 8-bit mask
control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-matrix is every other byte
control_reg_addr += blink_bit == 1 ? 0x12 : 0x00;//if blink_bit, shift 12 bytes to blink register
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
chThdSleepMilliseconds(5);
is31_read_register(page, control_reg_addr, &temp);//maintain status of leds on this byte
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
column_bit = 1<<(led_addr % 10 - 1);
column_byte = temp;
switch(action) {
case 0:
column_byte &= ~column_bit;
break;
case 1:
column_byte |= column_bit;
break;
case 2:
column_byte ^= column_bit;
break;
}
//return word to be written in register
led_control_word[0] = control_reg_addr;
led_control_word[1] = column_byte;
is31_write_data (page, led_control_word, 0x02);
}
void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte) {
uint8_t led_control_word[2] = {0};//register address and on/off byte
led_control_word[0] = (row - 1 ) * 0x02;// A-matrix is every other byte
led_control_word[1] = led_byte;
is31_write_data(page, led_control_word, 0x02);
}
void write_led_page (uint8_t page, uint8_t *user_led_array, uint8_t led_count) {
uint8_t i;
uint8_t pin, col;
uint8_t led_control_register[0x13] = {0};
__builtin_memset(led_control_register,0,13);
for(i=0;i<led_count;i++){
//shift pin by 1 for led register 0x00 address
pin = ((user_led_array[i] / 10) % 10 - 1 ) * 2 + 1;
col = user_led_array[i] % 10 - 1;
led_control_register[pin] |= 1<<(col);
}
is31_write_data(page, led_control_register, 0x13);
}
void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) {
uint8_t temp;
uint8_t led_control_word[2] = {0};
//blink if all leds are on
if (page == 0) {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
chThdSleepMilliseconds(5);
is31_read_register(0, 0x00, &temp);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
if (temp == 0xFF) {
led_action |= (1<<2); //set blink bit
}
}
set_led_bit(page,led_control_word,led_addr,led_action);
}
/* =====================
* hook into user keymap
* ===================== */
void led_controller_init(void) {
uint8_t i;
/* initialise I2C */
/* I2C pins */
palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
/* start I2C */
i2cStart(&I2CD1, &i2ccfg);
// try high drive (from kiibohd)
I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
// try glitch fixing (from kiibohd)
I2CD1.i2c->FLT = 4;
chThdSleepMilliseconds(10);
/* initialise IS31 chip */
is31_init();
//set Display Option Register so all pwm intensity is controlled from page 0
//enable blink and set blink period to 0.27s x rate
is31_write_register(IS31_FUNCTIONREG, IS31_REG_DISPLAYOPT, IS31_REG_DISPLAYOPT_INTENSITY_SAME + IS31_REG_DISPLAYOPT_BLINK_ENABLE + 4);
/* set full pwm on page 1 */
pwm_register_array[0] = 0;
__builtin_memset(pwm_register_array+1, 0xFF, 8);
for(i=0; i<8; i++) {
pwm_register_array[0] = 0x24 + (i * 0x10);//first byte of 9 bytes must be register address
is31_write_data(0, pwm_register_array, 9);
chThdSleepMilliseconds(5);
}
/* enable breathing when the displayed page changes */
// Fade-in Fade-out, time = 26ms * 2^N, N=3
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (3<<4)|3);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
/* more time consuming LED processing should be offloaded into
* a thread, with asynchronous messaging. */
chMBObjectInit(&led_mailbox, led_mailbox_queue, LED_MAILBOX_NUM_MSGS);
chThdCreateStatic(waLEDthread, sizeof(waLEDthread), LOWPRIO, LEDthread, NULL);
}

120
keyboards/infinity60/led_controller.h Normal file
View File

@ -0,0 +1,120 @@
/*
Copyright 2016 flabbergast <s3+flabbergast@sdfeu.org>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _LED_CONTROLLER_H_
#define _LED_CONTROLLER_H_
/* =========================
* communication functions
* ========================= */
msg_t is31_write_data(uint8_t page, uint8_t *buffer, uint8_t size);
msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data);
msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result);
/* ============================
* init functions/definitions
* ============================*/
void led_controller_init(void);
#define CAPS_LOCK_LED_ADDRESS 46 //pin matrix location
#define NUM_LOCK_LED_ADDRESS 85
/* =============================
* IS31 chip related definitions
* ============================= */
#define IS31_ADDR_DEFAULT 0x74
#define IS31_REG_CONFIG 0x00
// bits in reg
#define IS31_REG_CONFIG_PICTUREMODE 0x00
#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
// D2:D0 bits are starting frame for autoplay mode
#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
#define IS31_REG_AUTOPLAYCTRL1 0x02
// D6:D4 number of loops (000=infty)
// D2:D0 number of frames to be used
#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
#define IS31_REG_DISPLAYOPT 0x05
#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x08
// D2:D0 bits blink period time (*0.27s)
#define IS31_REG_AUDIOSYNC 0x06
#define IS31_REG_AUDIOSYNC_ENABLE 0x1
#define IS31_REG_FRAMESTATE 0x07
#define IS31_REG_BREATHCTRL1 0x08
// D6:D4 fade out time (26ms*2^i)
// D2:D0 fade in time (26ms*2^i)
#define IS31_REG_BREATHCTRL2 0x09
#define IS31_REG_BREATHCTRL2_ENABLE 0x10
// D2:D0 extinguish time (3.5ms*2^i)
#define IS31_REG_SHUTDOWN 0x0A
#define IS31_REG_SHUTDOWN_OFF 0x1
#define IS31_REG_SHUTDOWN_ON 0x0
#define IS31_REG_AGCCTRL 0x0B
#define IS31_REG_ADCRATE 0x0C
#define IS31_COMMANDREGISTER 0xFD
#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine'
#define IS31_TIMEOUT 10000 // needs to be long enough to write a whole page
/* ========================================
* LED Thread related items
* ========================================*/
extern mailbox_t led_mailbox;
void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint8_t action);
void set_lock_leds (uint8_t led_addr, uint8_t led_action, uint8_t page);
void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte);
void write_led_page (uint8_t page, uint8_t *led_array, uint8_t led_count);
// constants for signaling the LED controller thread
enum led_msg_t {
KEY_LIGHT,
SET_FULL_ROW,
OFF_LED,
ON_LED,
TOGGLE_LED,
BLINK_OFF_LED,
BLINK_ON_LED,
BLINK_TOGGLE_LED,
TOGGLE_ALL,
TOGGLE_BACKLIGHT,
DISPLAY_PAGE,
RESET_PAGE,
TOGGLE_NUM_LOCK,
TOGGLE_CAPS_LOCK,
TOGGLE_BREATH,
STEP_BRIGHTNESS
};
#endif /* _LED_CONTROLLER_H_ */

11
keyboards/infinity60/mcuconf.h
View File

@ -47,9 +47,12 @@
* USB driver settings * USB driver settings
*/ */
#define KINETIS_USB_USE_USB0 TRUE #define KINETIS_USB_USE_USB0 TRUE
/* Need to redefine this, since the default is for K20x */ #define KINETIS_USB_USB0_IRQ_PRIORITY 5
/* This is for Teensy LC; you should comment it out (or change to 5)
* for Teensy 3.x */ /*
#define KINETIS_USB_USB0_IRQ_PRIORITY 2 * I2C driver settings
*/
#define KINETIS_I2C_USE_I2C0 TRUE
#define KINETIS_I2C_I2C0_PRIORITY 4
#endif /* _MCUCONF_H_ */ #endif /* _MCUCONF_H_ */

5
keyboards/infinity60/rules.mk
View File

@ -1,6 +1,7 @@
# project specific files # project specific files
SRC = matrix.c \ SRC = matrix.c \
led.c led.c \
led_controller.c
## chip/board settings ## chip/board settings
# - the next two should match the directories in # - the next two should match the directories in
@ -55,7 +56,7 @@ OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
MOUSEKEY_ENABLE ?= yes # Mouse keys MOUSEKEY_ENABLE ?= yes # Mouse keys
EXTRAKEY_ENABLE ?= yes # Audio control and System control EXTRAKEY_ENABLE ?= yes # Audio control and System control