Jack Humbert
parent
cdef372f57
commit
43d1e05b31
49
Home.md
49
Home.md
|
|
@ -1,10 +1,10 @@
|
|||
# Quantum Mechanical Keyboard Firmware
|
||||
|
||||
You have found the QMK Firmware documentation site. This is a keyboard firmware based on the [tmk_keyboard firmware](http://github.com/tmk/tmk_keyboard) ([view differences](Differences-from-TMK)) with some useful features for Atmel AVR controllers, and more specifically, the [OLKB product line](http://olkb.com), the [ErgoDox EZ](http://www.ergodox-ez.com) keyboard, and the [Clueboard product line](http://clueboard.co/). It has also been ported to ARM chips using ChibiOS. You can use it to power your own hand-wired or custom keyboard PCB.
|
||||
You have found the QMK Firmware documentation site. This is a keyboard firmware based on the [tmk\_keyboard firmware](http://github.com/tmk/tmk_keyboard) \([view differences](Differences-from-TMK)\) with some useful features for Atmel AVR controllers, and more specifically, the [OLKB product line](http://olkb.com), the [ErgoDox EZ](http://www.ergodox-ez.com) keyboard, and the [Clueboard product line](http://clueboard.co/). It has also been ported to ARM chips using ChibiOS. You can use it to power your own hand-wired or custom keyboard PCB.
|
||||
|
||||
# Getting started
|
||||
|
||||
Before you are able to compile, you'll need to install an environment for AVR development. You'll find the instructions for any OS below. If you find another/better way to set things up from scratch, please consider [making a pull request](https://github.com/qmk/qmk_firmware/pulls) with your changes!
|
||||
Before you are able to compile, you'll need to install an environment for AVR or ARM development. You'll find the instructions for any OS below. If you find another/better way to set things up from scratch, please consider [making a pull request](https://github.com/qmk/qmk_firmware/pulls) with your changes!
|
||||
|
||||
* [Build Environment Setup](Build-Environment-Setup)
|
||||
* [QMK Overview](QMK-Overview)
|
||||
|
|
@ -29,17 +29,19 @@ Hit the semicolon key once, send a semicolon. Hit it twice, rapidly -- send a co
|
|||
|
||||
## Temporarily setting the default layer
|
||||
|
||||
`DF(layer)` - sets default layer to *layer*. The default layer is the one at the "bottom" of the layer stack - the ultimate fallback layer. This currently does not persist over power loss. When you plug the keyboard back in, layer 0 will always be the default. It is theoretically possible to work around that, but that's not what `DF` does.
|
||||
`DF(layer)` - sets default layer to _layer_. The default layer is the one at the "bottom" of the layer stack - the ultimate fallback layer. This currently does not persist over power loss. When you plug the keyboard back in, layer 0 will always be the default. It is theoretically possible to work around that, but that's not what `DF` does.
|
||||
|
||||
## Macro shortcuts: Send a whole string when pressing just one key
|
||||
|
||||
How would you like a single keypress to send a whole word, sentence, paragraph, or even document? Head on over to the [Macros](Macros) page to read up on all aspects of Simple and Dynamic Macros.
|
||||
|
||||
## Additional keycode aliases for software-implemented layouts (Colemak, Dvorak, etc)
|
||||
## Additional keycode aliases for software-implemented layouts \(Colemak, Dvorak, etc\)
|
||||
|
||||
Everything is assuming you're in Qwerty (in software) by default, but there is built-in support for using a Colemak or Dvorak layout by including this at the top of your keymap:
|
||||
Everything is assuming you're in Qwerty \(in software\) by default, but there is built-in support for using a Colemak or Dvorak layout by including this at the top of your keymap:
|
||||
|
||||
```
|
||||
#include <keymap_colemak.h>
|
||||
```
|
||||
|
||||
If you use Dvorak, use `keymap_dvorak.h` instead of `keymap_colemak.h` for this line. After including this line, you will get access to:
|
||||
|
||||
|
|
@ -54,30 +56,33 @@ To give an example, if you're using software-implemented Colemak, and want to ge
|
|||
|
||||
In order to enable backlight breathing, the following line must be added to your config.h file.
|
||||
|
||||
```
|
||||
#define BACKLIGHT_BREATHING
|
||||
```
|
||||
|
||||
The following function calls are used to control the breathing effect.
|
||||
|
||||
* ```breathing_enable()``` - Enable the free-running breathing effect.
|
||||
* ```breathing_disable()``` - Disable the free-running breathing effect immediately.
|
||||
* ```breathing_self_disable()``` - Disable the free-running breathing effect after the current effect ends.
|
||||
* ```breathing_toggle()``` - Toggle the free-running breathing effect.
|
||||
* ```breathing_defaults()``` - Reset the speed and brightness settings of the breathing effect.
|
||||
* `breathing_enable()` - Enable the free-running breathing effect.
|
||||
* `breathing_disable()` - Disable the free-running breathing effect immediately.
|
||||
* `breathing_self_disable()` - Disable the free-running breathing effect after the current effect ends.
|
||||
* `breathing_toggle()` - Toggle the free-running breathing effect.
|
||||
* `breathing_defaults()` - Reset the speed and brightness settings of the breathing effect.
|
||||
|
||||
The following function calls are used to control the maximum brightness of the breathing effect.
|
||||
|
||||
* ```breathing_intensity_set(value)``` - Set the brightness of the breathing effect when it is at its max value.
|
||||
* ```breathing_intensity_default()``` - Reset the brightness of the breathing effect to the default value based on the current backlight intensity.
|
||||
* `breathing_intensity_set(value)` - Set the brightness of the breathing effect when it is at its max value.
|
||||
* `breathing_intensity_default()` - Reset the brightness of the breathing effect to the default value based on the current backlight intensity.
|
||||
|
||||
The following function calls are used to control the cycling speed of the breathing effect.
|
||||
|
||||
* ```breathing_speed_set(value)``` - Set the speed of the breathing effect - how fast it cycles.
|
||||
* ```breathing_speed_inc(value)``` - Increase the speed of the breathing effect by a fixed value.
|
||||
* ```breathing_speed_dec(value)``` - Decrease the speed of the breathing effect by a fixed value.
|
||||
* ```breathing_speed_default()``` - Reset the speed of the breathing effect to the default value.
|
||||
* `breathing_speed_set(value)` - Set the speed of the breathing effect - how fast it cycles.
|
||||
* `breathing_speed_inc(value)` - Increase the speed of the breathing effect by a fixed value.
|
||||
* `breathing_speed_dec(value)` - Decrease the speed of the breathing effect by a fixed value.
|
||||
* `breathing_speed_default()` - Reset the speed of the breathing effect to the default value.
|
||||
|
||||
The following example shows how to enable the backlight breathing effect when the FUNCTION layer macro button is pressed:
|
||||
|
||||
```
|
||||
case MACRO_FUNCTION:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
|
|
@ -92,9 +97,11 @@ The following example shows how to enable the backlight breathing effect when th
|
|||
layer_off(LAYER_FUNCTION);
|
||||
}
|
||||
break;
|
||||
```
|
||||
|
||||
The following example shows how to pulse the backlight on-off-on when the RAISED layer macro button is pressed:
|
||||
|
||||
```
|
||||
case MACRO_RAISED:
|
||||
if (record->event.pressed)
|
||||
{
|
||||
|
|
@ -109,14 +116,15 @@ The following example shows how to pulse the backlight on-off-on when the RAISED
|
|||
update_tri_layer(LAYER_LOWER, LAYER_RAISED, LAYER_ADJUST);
|
||||
}
|
||||
break;
|
||||
```
|
||||
|
||||
## Other firmware shortcut keycodes
|
||||
|
||||
* `RESET` - puts the MCU in DFU mode for flashing new firmware (with `make dfu`)
|
||||
* `DEBUG` - the firmware into debug mode - you'll need hid_listen to see things
|
||||
* `RESET` - puts the MCU in DFU mode for flashing new firmware \(with `make dfu`\)
|
||||
* `DEBUG` - the firmware into debug mode - you'll need hid\_listen to see things
|
||||
* `BL_ON` - turns the backlight on
|
||||
* `BL_OFF` - turns the backlight off
|
||||
* `BL_<n>` - sets the backlight to level *n*
|
||||
* `BL_<n>` - sets the backlight to level _n_
|
||||
* `BL_INC` - increments the backlight level by one
|
||||
* `BL_DEC` - decrements the backlight level by one
|
||||
* `BL_TOGG` - toggles the backlight
|
||||
|
|
@ -161,7 +169,7 @@ The conditional `if (record->event.pressed)` can tell if the key is being presse
|
|||
|
||||
## `void led_set_*(uint8_t usb_led)`
|
||||
|
||||
This gets called whenever there is a state change on your host LEDs (eg caps lock, scroll lock, etc). The LEDs are defined as:
|
||||
This gets called whenever there is a state change on your host LEDs \(eg caps lock, scroll lock, etc\). The LEDs are defined as:
|
||||
|
||||
```
|
||||
#define USB_LED_NUM_LOCK 0
|
||||
|
|
@ -172,3 +180,4 @@ This gets called whenever there is a state change on your host LEDs (eg caps loc
|
|||
```
|
||||
|
||||
and can be tested against the `usb_led` with a conditional like `if (usb_led & (1<<USB_LED_CAPS_LOCK))` - if this is true, you can turn your LED on, otherwise turn it off.
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue