Merge branch 'master' into promethium

keyboards/atreus62/keymaps/mneme/Makefile

@@ -0,0 +1,5 @@
+TAP_DANCE_ENABLE = yes
+NKRO_ENABLE = true
+MOUSEKEY_ENABLE = no
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = no

keyboards/atreus62/keymaps/mneme/README.md

@@ -0,0 +1,56 @@
+<!-- -*- mode: markdown; fill-column: 8192 -*- -->
+
+Mnemes Swedish Bonaza
+=======================
+
+My Layout in process, most of the code is shamelessly stolen from [algernons][algernon] excellent layout
+
+ [algernon]: https://github.com/algernon/ergodox-layout
+
+It's for Windows (current work forces me to) and Swedish (matter of birth) so ymmw.
+
+## Table of Contents
+
+* [Layouts](#layouts)
+    - [Base layer](#base-layer)
+    - [Nav layer](#nav-layer)
+    - [Sym layer](#sym-layer)
+    - [LED states](#led-states)
+
+# Layouts
+
+## Base layer
+
+![Base layer](img/base.png)
+
+
+* The number row doubles as a function row. Short presses produces numbers, long presses produces Fxx
+* The `Shift`, `Alt`, and `Control` modifiers are one-shot.
+* `Backspace` and `Enter` doubles as switches to the `sym` layer when held
+* The `ESC` key also doubles as a one-shot cancel key.
+* The **Lead** key is followed by a sequence of keys.
+    - `LEAD l`   : `lgui+l`.
+    - `LEAD s l` : `λ`.
+    - `LEAD s s` : `¯\_(ツ)_/¯`
+    - `LEAD s f` : `凸(ツ)凸`
+    - `LEAD a *` : Application switching based on position in start menu. Very specific to my computer.
+
+
+## Nav layer
+
+![Nav layer](img/fun.png)
+
+Basic navigation on the right hand and modifiers close
+by for the left. The latter because I tend to use `ctrl+arrows` quite a lot.
+ 
+## Sym layer
+
+![Sym layer](img/sym.png)
+
+* Easy access to most symbols I use on a daily basis. Most common are on the home row, the rest are grouped as best as I could.
+
+- `eq` : Tapdance, produces `===` and `!==`
+- `fun`: Tapdance, produces `=>` and `() => {\n`
+
+# License
+  GPL-3+

keyboards/atreus62/keymaps/mneme/config.h

@@ -0,0 +1,7 @@
+#define ONESHOT_TIMEOUT 3000
+#define TAPPING_TERM 200
+#define PREVENT_STUCK_MODIFIERS
+
+#define LEADER_TIMEOUT 1000
+
+#include "../../config.h"

keyboards/atreus62/keymaps/mneme/keymap.c

@@ -0,0 +1,337 @@
+#include <stdarg.h>
+#include "atreus62.h"
+#include "led.h"
+#include "action_layer.h"
+#include "action_util.h"
+
+/*
+ *WINDOWS SWEDISH
+ */
+#define KN_HALF	KC_GRV          // 1/2
+#define KN_PLUS	KC_MINS         // +
+#define KN_ACUT	KC_EQL          // ´
+#define KN_AO	  KC_LBRC         // Å
+#define KN_UMLA	KC_RBRC         // ¨
+#define KN_OE	  KC_SCLN         // Ö
+#define KN_AE	  KC_QUOT         // Ä
+#define	KN_QUOT	KC_NUHS         // '
+#define KN_LABK	KC_NUBS         // <
+#define KN_MINS KC_SLSH         // -
+#define KN_EXLM LSFT(KC_1)      // !
+#define KN_DQT  LSFT(KC_2)      // "
+#define KN_AT   RALT(KC_2)      // @
+#define KN_HASH LSFT(KC_3)      // #
+#define KN_DLR  RALT(KC_4)      // $
+#define KN_PERC LSFT(KC_5)      // %
+#define KN_AMPR LSFT(KC_6)      // &
+#define KN_SLSH LSFT(KC_7)      // /
+#define KN_LPRN LSFT(KC_8)      // (
+#define KN_RPRN LSFT(KC_9)      // )
+#define KN_EQL  LSFT(KC_0)      // =
+#define KN_UNDS LSFT(KN_MINS)   // _
+#define KN_QUES LSFT(KN_PLUS)   // ?
+#define KN_GRAV LSFT(KN_ACUT)   // `
+#define KN_LCBR RALT(KC_7)      // {
+#define KN_RCBR RALT(KC_0)      // }
+#define KN_LBRC RALT(KC_8)      // [
+#define KN_RBRC RALT(KC_9)      // ]
+#define KN_RABK LSFT(KN_LABK)   // <
+#define KN_COLN LSFT(KC_DOT)    // :
+#define KN_SCLN LSFT(KC_COMM)   // :
+#define KN_PIPE RALT(KN_LABK)   // |
+#define KN_QUES LSFT(KN_PLUS)   // ?
+#define KN_CIRC LSFT(KN_UMLA)   // ^
+#define KN_ASTR LSFT(KN_QUOT)   // *
+#define KN_TILD RALT(KN_UMLA)   // ~
+#define KN_BSLS RALT(KN_PLUS)   //
+
+#define OSM_LCTL OSM(MOD_LCTL)
+#define OSM_LALT OSM(MOD_LALT)
+#define OSM_LSFT OSM(MOD_LSFT)
+
+#define KC_HYP LSFT(LALT(LCTL(KC_LGUI)))
+
+#define KC_COPY LCTL(KC_C)
+#define KC_PASTE LCTL(KC_V)
+#define KC_UNDO LCTL(KC_Z)
+#define KC_REDO LCTL(LSFT(KC_Z))
+
+// Layers
+enum {
+  BASE = 0,
+  NAV,
+  SYM
+};
+
+//Macros
+enum {
+  KF_1 = 0, // 1, F1
+  KF_2, // ...
+  KF_3,
+  KF_4,
+  KF_5,
+  KF_6,
+  KF_7,
+  KF_8,
+  KF_9,
+  KF_10,
+  KF_11,
+  KF_12
+};
+
+// Tapdance
+enum {
+  TD_FUN = 0,
+  TD_EQ
+};
+
+//Custom keycodes
+enum {
+  PLACEHOLDER = SAFE_RANGE
+};
+
+//State and timers
+uint16_t kf_timers[12];
+
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [BASE] = {
+
+   { M(KF_11) ,M(KF_1)  ,M(KF_2)  ,M(KF_3)  ,M(KF_4) ,M(KF_5)         ,KC_NO   ,M(KF_6)        ,M(KF_7) ,M(KF_8) ,M(KF_9) ,M(KF_10) ,M(KF_12) },
+   { KC_TAB   ,KC_Q     ,KC_W     ,KC_E     ,KC_R    ,KC_T            ,KC_NO   ,KC_Y           ,KC_U    ,KC_I    ,KC_O    ,KC_P     ,KN_AO },
+   { OSM_LCTL ,KC_A     ,KC_S     ,KC_D     ,KC_F    ,KC_G            ,KC_NO   ,KC_H           ,KC_J    ,KC_K    ,KC_L    ,KN_OE    ,KN_AE },
+   { OSM_LSFT ,KC_Z     ,KC_X     ,KC_C     ,KC_V    ,KC_B            ,KC_DELT ,KC_N           ,KC_M    ,KC_COMM ,KC_DOT  ,KN_MINS  ,OSM_LSFT },
+   { MO(NAV)  ,OSM_LCTL ,OSM_LALT ,KC_LGUI  ,KC_SPC  ,LT(SYM,KC_BSPC) ,KC_HYP  ,LT(SYM,KC_ENT) ,KC_SPC  ,KC_LEAD ,KC_LALT ,KC_LCTRL ,MO(NAV) }
+
+ },
+  [NAV] = {
+
+   { KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS },
+   { KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_NO   ,KC_PGUP  ,KC_HOME  ,KC_UP    ,KC_END   ,KC_TRNS  ,KC_TRNS },
+   { KC_TRNS  ,KC_LSFT  ,KC_LCTL  ,KC_LALT  ,KC_L  ,KC_TRNS  ,KC_NO   ,KC_PGDN  ,KC_LEFT  ,KC_DOWN  ,KC_RIGHT ,KC_TRNS  ,KC_TRNS },
+   { KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS },
+   { KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_VOLD  ,KC_VOLU }
+
+  },
+  [SYM] = {
+
+   { KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,TD(TD_EQ) ,KC_NO   ,TD(TD_FUN) ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS },
+   { KC_TRNS  ,KN_LABK  ,KN_RABK  ,KN_LCBR  ,KN_RCBR  ,KN_PLUS   ,KC_NO   ,KN_AT      ,KN_DQT   ,KN_QUOT  ,KN_GRAV  ,KN_SLSH  ,KC_TRNS },
+   { KC_TRNS  ,KN_EXLM  ,KN_EQL   ,KN_LPRN  ,KN_RPRN  ,KN_MINS   ,KC_NO   ,KN_UNDS    ,KN_SCLN  ,KN_COLN  ,KN_AMPR  ,KN_PIPE  ,KC_TRNS },
+   { KC_TRNS  ,KN_DLR   ,KN_PERC  ,KN_LBRC  ,KN_RBRC  ,KN_ASTR   ,KC_TRNS ,KN_HASH    ,KC_COMM  ,KC_DOT   ,KN_QUES  ,KN_BSLS  ,KC_TRNS },
+   { KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS   ,KC_TRNS ,KC_TRNS    ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS  ,KC_TRNS }
+
+  }
+};
+
+#define TAP_ONCE(code)  \
+  register_code (code); \
+  unregister_code (code)
+
+static void m_tapn (uint8_t code, ...) {
+  uint8_t kc = code;
+  va_list ap;
+
+  va_start(ap, code);
+  do {
+    register_code(kc);
+    unregister_code(kc);
+    wait_ms(50);
+    kc = va_arg(ap, int);
+  } while (kc != 0);
+  va_end(ap);
+}
+
+static void m_handle_kf (keyrecord_t *record, uint8_t id) {
+  uint8_t code = id - KF_1;
+
+  if (record->event.pressed) {
+    kf_timers[code] = timer_read ();
+  } else {
+    uint8_t kc_base;
+    uint8_t long_press = (kf_timers[code] && timer_elapsed (kf_timers[code]) > TAPPING_TERM);
+
+    kf_timers[code] = 0;
+
+    switch(id){
+      case KF_1 ... KF_10:
+        if (long_press) {
+          // Long press
+          kc_base = KC_F1;
+        } else {
+          kc_base = KC_1;
+        }
+        code += kc_base;
+        break;
+      case KF_11:
+        code = long_press ? KC_F11 : KC_ESC;
+        break;
+      case KF_12:
+        code = long_press ? KC_F12 : KN_PLUS;
+        break;
+    }
+    register_code (code);
+    unregister_code (code);
+  }
+}
+
+const uint16_t PROGMEM fn_actions[] = {
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  switch (id) {
+    case KF_1 ... KF_12:
+      m_handle_kf(record, id);
+      break;
+  }
+  return MACRO_NONE;
+};
+
+// Custom keycodes
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  bool queue = true;
+
+  //Cancle one-shot mods.
+  switch (keycode) {
+    case KC_ESC:
+      if (record->event.pressed && get_oneshot_mods() && !has_oneshot_mods_timed_out()) {
+        clear_oneshot_mods();
+        queue = false;
+      }
+      break;
+  }
+  return queue;
+}
+
+// TAP DANCE SETTINGS
+void dance_eq (qk_tap_dance_state_t *state, void *user_data) {
+  switch (state->count) {
+    case 1: // ===
+      register_code(KC_LSHIFT);
+      m_tapn(KC_0, KC_0, KC_0, 0);
+      unregister_code(KC_LSHIFT);
+      break;
+    case 2:
+      register_code(KC_LSHIFT);
+      m_tapn(KC_1, KC_0, KC_0, 0);
+      unregister_code(KC_LSHIFT);
+      break;
+    default:
+      reset_tap_dance(state);
+  }
+}
+
+void dance_fun (qk_tap_dance_state_t *state, void *user_data) {
+  switch (state->count) {
+    case 1: // =>
+      register_code(KC_LSHIFT);
+      m_tapn(KC_0, KN_LABK, 0);
+      unregister_code(KC_LSHIFT);
+      break;
+    case 2: // () => {}
+      register_code(KC_LSHIFT);
+      m_tapn(KC_8, KC_9, KC_SPC, KC_0, KN_LABK, KC_SPC, 0);
+      unregister_code(KC_LSHIFT);
+      register_code(KC_RALT);
+      m_tapn(KC_7, 0);
+      unregister_code(KC_RALT);
+      TAP_ONCE(KC_ENT);
+      break;
+    default:
+      reset_tap_dance(state);
+  }
+}
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+ [TD_FUN] = ACTION_TAP_DANCE_FN (dance_fun)
+ ,[TD_EQ] = ACTION_TAP_DANCE_FN (dance_eq)
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+  set_unicode_input_mode(UC_WINC);
+};
+
+LEADER_EXTERNS();
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+  LEADER_DICTIONARY() {
+    leading = false;
+    leader_end();
+    SEQ_ONE_KEY(KC_L){
+      register_code(KC_RGUI);
+      TAP_ONCE(KC_L);
+      unregister_code(KC_RGUI);
+    };
+
+
+    SEQ_TWO_KEYS (KC_A, KC_W) {
+      //Web - chrome
+      register_code (KC_LGUI); TAP_ONCE (KC_1); unregister_code (KC_LGUI);
+    }
+    SEQ_TWO_KEYS (KC_A, KC_P) {
+      //sPotify
+      register_code (KC_LGUI); TAP_ONCE (KC_2); unregister_code (KC_LGUI);
+
+    }
+    SEQ_TWO_KEYS (KC_A, KC_T) {
+      //Total Commander
+      register_code (KC_LGUI); TAP_ONCE (KC_3); unregister_code (KC_LGUI);
+
+    }
+    SEQ_TWO_KEYS (KC_A, KC_A) {
+      //Atom
+      register_code (KC_LGUI); TAP_ONCE (KC_4); unregister_code (KC_LGUI);
+
+    }
+    SEQ_TWO_KEYS (KC_A, KC_E) {
+      //Emacs
+      register_code (KC_LGUI); TAP_ONCE (KC_5); unregister_code (KC_LGUI);
+
+    }
+    SEQ_TWO_KEYS (KC_A, KC_C) {
+      //Cmdr
+      register_code (KC_LGUI); TAP_ONCE (KC_6); unregister_code (KC_LGUI);
+
+    }
+    SEQ_TWO_KEYS (KC_A, KC_S) {
+      //Slack
+      register_code (KC_LGUI); TAP_ONCE (KC_7); unregister_code (KC_LGUI);
+    }
+
+
+    SEQ_TWO_KEYS (KC_S, KC_S) {
+      // ¯\_(ツ)_/¯
+      unicode_input_start(); register_hex(0xaf); unicode_input_finish();
+      register_code (KC_LALT);
+      register_code (KC_LCTL);
+      TAP_ONCE (KN_PLUS);
+      unregister_code (KC_LCTL);
+      unregister_code (KC_LALT);
+
+      register_code (KC_RSFT); TAP_ONCE (KC_8); unregister_code (KC_RSFT);
+      unicode_input_start (); register_hex(0x30c4); unicode_input_finish();
+      register_code (KC_RSFT); TAP_ONCE (KC_9); TAP_ONCE(KC_7); unregister_code (KC_RSFT);
+      unicode_input_start (); register_hex(0xaf); unicode_input_finish();
+    }
+
+    SEQ_TWO_KEYS (KC_S, KC_F) {
+      // 凸(ツ)凸
+      unicode_input_start(); register_hex(0x51F8); unicode_input_finish();
+      register_code (KC_RSFT); TAP_ONCE (KC_8); unregister_code (KC_RSFT);
+      unicode_input_start (); register_hex(0x30c4); unicode_input_finish();
+      register_code (KC_RSFT); TAP_ONCE (KC_9); unregister_code (KC_RSFT);
+      unicode_input_start (); register_hex(0x51F8); unicode_input_finish();
+    }
+
+    SEQ_TWO_KEYS (KC_S, KC_L) {
+      // λ
+      unicode_input_start();
+      register_hex(0x03bb);
+      unicode_input_finish();
+    }
+  };
+};

keyboards/atreus62/keymaps/mneme/unicode

@@ -0,0 +1,114 @@
+Todo
+☐	2610 Todo
+☑	2611 Done
+☒ 2612 Failed
+
+Operator
+×	00D7	Multiplication
+÷	00F7	Division
+≤	2264	LessEqual
+≥	2265	MoreEqual
+± 00B1  Plusminus
+
+Math
+∏ 220F Product
+∑ 2211 Sum
+≈ 2248 Almost
+≡ 2261 Equivalent
+∞ 221E Infinity
+‰ 2030 Mille
+
+Set
+⊂ 2282 Subset
+⊃ 2283 sUperset
+∩ 2229 Intersextion
+∪ 222A Union
+∈ 2208 Element
+∉ 2209 Notelement
+∍ 220D Contains
+∌ 220C doesNotcontain
+
+Logic
+¬ 00AC Not
+∧ 2227 And
+∨ 2228 Or
+∃ 2203 Exists
+∄ 2204 Notexists
+
+Greek
+µ 00B5 Micro
+λ 03BB Lamda
+Ω 2126 Omega
+α	03B1 Alpha
+β	03B2 Beta
+γ	03B3 Gamma
+π	03C0 Pi
+δ 03B4 Delta
+
+Other
+☁ 2601 Cloud
+☼ 263C Sun
+☂ 2602 Rain
+☠ 2620 Skull
+♺ 267A Recycle
+👍1F44D thumbsUp
+👎1F44E thumbsDown
+💩 1F4A9 Poo
+
+
+//Todo
+SEQ_THREE_KEYS(KC_U, KC_G, KC_T){m_unicode(0x2610);}; // Todo
+SEQ_THREE_KEYS(KC_U, KC_G, KC_D){m_unicode(0x2611);}; // Done
+SEQ_THREE_KEYS(KC_U, KC_G, KC_F){m_unicode(0x2612);}; // Failed
+
+//Operator
+SEQ_THREE_KEYS(KC_U, KC_O, KC_M){m_unicode(0x00D7);}; //  Multiplication
+SEQ_THREE_KEYS(KC_U, KC_O, KC_D){m_unicode(0x00F7);}; //  Division
+SEQ_THREE_KEYS(KC_U, KC_O, KC_L){m_unicode(0x2264);}; //  LessEqual
+SEQ_THREE_KEYS(KC_U, KC_O, KC_M){m_unicode(0x2265);}; //  MoreEqual
+SEQ_THREE_KEYS(KC_U, KC_O, KC_P){m_unicode(0x00B1);}; //  Plusminus
+
+//Math
+SEQ_THREE_KEYS(KC_U, KC_M, KC_P){m_unicode(0x220F);}; // Product
+SEQ_THREE_KEYS(KC_U, KC_M, KC_S){m_unicode(0x2211);}; // Sum
+SEQ_THREE_KEYS(KC_U, KC_M, KC_A){m_unicode(0x2248);}; // Almost
+SEQ_THREE_KEYS(KC_U, KC_M, KC_E){m_unicode(0x2261);}; // Equivalent
+SEQ_THREE_KEYS(KC_U, KC_M, KC_I){m_unicode(0x221E);}; // Infinity
+SEQ_THREE_KEYS(KC_U, KC_M, KC_M){m_unicode(0x2030);}; // Mille
+
+//Set
+SEQ_THREE_KEYS(KC_U, KC_S, KC_S){m_unicode(0x2282);}; Subset
+SEQ_THREE_KEYS(KC_U, KC_S, KC_P){m_unicode(0x2283);}; suPerset
+SEQ_THREE_KEYS(KC_U, KC_S, KC_I){m_unicode(0x2229);}; Intersection
+SEQ_THREE_KEYS(KC_U, KC_S, KC_U){m_unicode(0x222A);}; Union
+SEQ_THREE_KEYS(KC_U, KC_S, KC_E){m_unicode(0x2208);}; Element
+SEQ_THREE_KEYS(KC_U, KC_S, KC_N){m_unicode(0x2209);}; Notelement
+SEQ_THREE_KEYS(KC_U, KC_S, KC_C){m_unicode(0x220D);}; Contains
+SEQ_THREE_KEYS(KC_U, KC_S, KC_D){m_unicode(0x220C);}; doesNotcontain
+
+//Logic
+SEQ_THREE_KEYS(KC_U, KC_L, KC_N){m_unicode(0x00AC);}; // Not
+SEQ_THREE_KEYS(KC_U, KC_L, KC_A){m_unicode(0x2227);}; // And
+SEQ_THREE_KEYS(KC_U, KC_L, KC_O){m_unicode(0x2228);}; // Or
+SEQ_THREE_KEYS(KC_U, KC_L, KC_E){m_unicode(0x2203);}; // Exists
+SEQ_THREE_KEYS(KC_U, KC_L, KC_N){m_unicode(0x2204);}; // Notexists
+
+//Greek
+SEQ_THREE_KEYS(KC_U, KC_G, KC_M){m_unicode(0x00B5);}; // Micro
+SEQ_THREE_KEYS(KC_U, KC_G, KC_L){m_unicode(0x03BB);}; // Lamda
+SEQ_THREE_KEYS(KC_U, KC_G, KC_O){m_unicode(0x2126);}; // Omega
+SEQ_THREE_KEYS(KC_U, KC_G, KC_A){m_unicode(0x03B1);}; // Alpha
+SEQ_THREE_KEYS(KC_U, KC_G, KC_B){m_unicode(0x03B2);}; // Beta
+SEQ_THREE_KEYS(KC_U, KC_G, KC_G){m_unicode(0x03B3);}; // Gamma
+SEQ_THREE_KEYS(KC_U, KC_G, KC_P){m_unicode(0x03C0);}; // Pi
+SEQ_THREE_KEYS(KC_U, KC_G, KC_D){m_unicode(0x03B4);}; // Delta
+
+//Zother
+SEQ_THREE_KEYS(KC_U, KC_Z, KC_C){m_unicode(0x2601);};  // Cloud
+SEQ_THREE_KEYS(KC_U, KC_Z, KC_S){m_unicode(0x263C);};  // Sun
+SEQ_THREE_KEYS(KC_U, KC_Z, KC_R){m_unicode(0x2602);};  // Rain
+SEQ_THREE_KEYS(KC_U, KC_Z, KC_K){m_unicode(0x2620);};  // sKull
+SEQ_THREE_KEYS(KC_U, KC_Z, KC_R){m_unicode(0x267A);};  // rEcycle
+SEQ_THREE_KEYS(KC_U, KC_Z, KC_U){m_unicode(0x1F44D);}; // thumbsUp
+SEQ_THREE_KEYS(KC_U, KC_Z, KC_D){m_unicode(0x1F44E);}; // thumbsDown
+SEQ_THREE_KEYS(KC_U, KC_Z, KC_P){m_unicode(0x1F4A9);}; // Poo

keyboards/ergodox/keymaps/bryan/keymap.c

@@ -0,0 +1,226 @@
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+
+enum custom_keycodes {
+  PLACEHOLDER = SAFE_RANGE, // can always be here
+  EPRM,
+  VRSN,
+  RGB_SLD
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------------.           ,--------------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | Cmd,Shft,[ |           | Cmd,Shft,] |   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------------|           |------------+------+------+------+------+------+--------|
+ * | Del    |   Q  |   W  |   E  |   R  |   T  |  L1        |           |  L1        |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|            |           |            |------+------+------+------+------+--------|
+ * |BkSp/Cmd|   A  |   S  |   D  |   F  |   G  |------------|           |------------|   H  |   J  |   K  |   L  |; / L2|' / Cmd |
+ * |--------+------+------+------+------+------| Hyper      |           | Meh        |------+------+------+------+------+--------|
+ * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |            |           |            |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
+ * `--------+------+------+------+------+-------------------'           `-------------+------+------+------+------+--------'
+ *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |Ctrl/Esc|PgUp|       | App  | LGui |       
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | PgDn |       | Home |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |      |ace   | Esc  |       | Alt  |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[BASE] = KEYMAP(  // layer 0 : default
+        // left hand
+        KC_EQL,                KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   M(2),
+        KC_DELT,               KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   TG(SYMB),
+        GUI_T(KC_BSPC),        KC_A,         KC_S,   KC_D,   KC_F,   KC_G,
+        KC_LSFT,               CTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   ALL_T(KC_NO),
+        LT(SYMB,KC_GRV),KC_QUOT,      LALT(KC_LSFT),  KC_LEFT,KC_RGHT,
+                                                 CTL_T(KC_ESC),KC_PGUP,
+                                                               KC_PGDN,
+                                               KC_SPC,KC_BSPC, KC_ESC,
+        // right hand
+             M(3),        KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             KC_MINS,
+             TG(SYMB),    KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,             KC_BSLS,
+                          KC_H,   KC_J,   KC_K,   KC_L,   LT(MDIA, KC_SCLN),GUI_T(KC_QUOT),
+             MEH_T(KC_NO),KC_N,   KC_M,   KC_COMM,KC_DOT, CTL_T(KC_SLSH),   KC_RSFT,
+                                  KC_UP,  KC_DOWN,KC_LBRC,KC_RBRC,          KC_FN1,
+             
+             ALT_T(KC_APP),  KC_LGUI,
+             KC_HOME,
+             KC_LALT,KC_TAB, KC_ENT
+    ),
+/* Keymap 1: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |  <-  |   1  |   2  |   3  |   \  |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = KEYMAP(
+       // left hand
+       KC_TRNS,KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
+       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
+       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
+       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
+       KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       KC_TRNS,KC_TRNS,
+                                               KC_TRNS,
+                               KC_TRNS,KC_TRNS,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
+       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12,
+                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
+       KC_TRNS, M(1), KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
+                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+),
+// KC_COMM, KC_MINS
+
+/* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = KEYMAP(
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
+                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_WBAK
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+        if (record->event.pressed) {
+          SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+        }
+        break;
+        case 1:
+        if (record->event.pressed) { // For resetting EEPROM
+          eeconfig_init();
+        }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    // dynamically generate these.
+    case EPRM:
+      if (record->event.pressed) {
+        eeconfig_init();
+      }
+      return false;
+      break;
+    case VRSN:
+      if (record->event.pressed) {
+        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+      }
+      return false;
+      break;
+    case RGB_SLD:
+      if (record->event.pressed) {
+        #ifdef RGBLIGHT_ENABLE
+          rgblight_mode(1);
+        #endif
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};

keyboards/ergodox/keymaps/deadcyclo/readme.md

@@ -5,6 +5,32 @@ some common keys might be missing, as this layout is intented to be used on *nix
 with their system. The layout is geared towards avoiding using the rat (mouse for those of you who are
 unfamiliar with tiling window managers) as much as possibly.
 
+# Layouts
+
+All layer images created using [keyboard-layout-editor](http://www.keyboard-layout-editor.com/)
+
+## Base layer
+
+[![Base layer](images/deadcyclo-base-layout.png)](http://www.keyboard-layout-editor.com/#/gists/0321b18620180a3e46c498206eb65366)
+
+## Layer 1 - Symbols
+
+[![Layer 1 - Symbols](images/deadcyclo-layer-1-symbols.png)](http://www.keyboard-layout-editor.com/#/gists/96714e198054c9115bafb5267cc6bc73)
+
+## Layer 2 - Media and Mouse
+
+[![Layer 2 - Media and Mouse](images/deadcyclo-layer-2-media-and-mouse.png)](http://www.keyboard-layout-editor.com/#/gists/824759486e378bcec30784309a7e5731)
+
+## Layer 3 - Navigation
+
+[![Layer 3 - Navigation](images/deadcyclo-layer-3-navigation.png)](http://www.keyboard-layout-editor.com/#/gists/67d9613dcd873c68693d11863d0fd289)
+
 # Changelog
 
 - 02.01.2017 Added delete key on second layer
+- 10.01.2017 Added layer images to readme
+
+# TODO
+
+- Add unicode support (direct input and indirect? see algernon layout for examples)
+- Add descriptions below each layer image of any special functions/keys

keyboards/kinesis/Makefile

@@ -1,3 +1,5 @@
+SUBPROJECT_DEFAULT = alvicstep
+
 ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
 endif

keyboards/kinesis/alvicstep/Makefile

@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../../Makefile
+endif

keyboards/kinesis/alvicstep/alvicstep.c

@@ -0,0 +1,105 @@
+#include "kinesis.h"
+
+// begin section origin  https://github.com/alvicstep/tmk_keyboard 
+
+void all_led_off(void)
+{
+        PORTD = 0b11111111;
+}
+
+void all_led_on(void)
+{
+        PORTD = 0b00000000;
+}
+void num_lock_led_on(void)
+{
+        PORTD = 0b11101111;
+}
+
+void caps_lock_led_on(void)
+{
+        PORTD = 0b01111111;
+}
+
+void scroll_lock_led_on(void)
+{
+        PORTD = 0b11011111;
+}
+void keypad_led_on(void)
+{
+        PORTD = 0b10111111;
+}
+void blink_all_leds(void)
+{
+        all_led_on();
+        _delay_ms(500);
+
+        all_led_off();
+        _delay_ms(100);
+
+        caps_lock_led_on();
+        _delay_ms(100);
+
+	 num_lock_led_on();
+        _delay_ms(100);
+
+        scroll_lock_led_on();
+        _delay_ms(100);
+
+         keypad_led_on();
+        _delay_ms(100);
+
+        //back
+
+        scroll_lock_led_on();
+        _delay_ms(100);
+
+        num_lock_led_on();
+        _delay_ms(100);
+
+        caps_lock_led_on();
+        _delay_ms(100);
+
+        all_led_off();
+}
+
+// End section origin  https://github.com/alvicstep/tmk_keyboard 
+
+ void matrix_init_kb(void) {
+	  blink_all_leds();
+	  matrix_init_user();
+}
+
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+//Copyright 2014 Warren Janssens <warren.janssens@gmail.com>
+   uint8_t leds = 0xF0;
+    if (usb_led & 1 << USB_LED_NUM_LOCK)
+        leds &= ~0x10;
+    if (usb_led & 1 << USB_LED_CAPS_LOCK)
+        leds &= ~0x80;
+    if (usb_led & 1 << USB_LED_SCROLL_LOCK)
+        leds &= ~0x20;
+    PORTD = (PORTD & 0x0F) | leds;
+
+	led_set_user(usb_led);
+
+}
+
+

keyboards/kinesis/alvicstep/alvicstep.h

@@ -0,0 +1,67 @@
+#ifndef KINESIS_ALVICSTEP_H
+#define KINESIS_ALVICSTEP_H
+
+#include "../kinesis.h"
+
+
+#define KEYMAP(                           \
+    k02,k22,k12,k01,k21,k11,k00,k20,k10,  \
+    k80,k70,k60,k50,k40,k30,              \
+    k81,k71,k61,k51,k41,k31,              \
+    k82,k72,k62,k52,k42,k32,              \
+    k83,k73,k63,k53,k43,k33,              \
+        k74,k64,k54,k34,                  \
+                        k36,k35,          \
+                            k55,          \
+                    k56,k46,k75,          \
+    k03,k23,k13,k04,k24,k14,k05,k85,k84,  \
+        k94,kA4,kB4,kD4,kE4,kF4,          \
+        k95,kA5,kB5,kD5,kE5,kF5,          \
+        k96,kA6,kB6,kD6,kE6,kF6,          \
+        k97,kA7,kB7,kD7,kE7,kF7,          \
+            k93,kB3,kD3,kE3,              \
+    k47,k66,                              \
+    k67,                                  \
+    k87,k76,k86                           \
+) {                                       \
+        { k00,    k01,    k02,    k03,    k04,    k05,    KC_NO,   KC_NO   }, \
+        { k10,    k11,    k12,    k13,    k14,    KC_NO,  KC_NO,   KC_NO   }, \
+        { k20,    k21,    k22,    k23,    k24,    KC_NO,  KC_NO,   KC_NO   }, \
+        { k30,    k31,    k32,    k33,    k34,    k35,    k36,     KC_NO   }, \
+        { k40,    k41,    k42,    k43,    KC_NO,  KC_NO,  k46,     k47     }, \
+        { k50,    k51,    k52,    k53,    k54,    k55,    k56,     KC_NO   }, \
+        { k60,    k61,    k62,    k63,    k64,    KC_NO,  k66,     k67     }, \
+        { k70,    k71,    k72,    k73,    k74,    k75,    k76,     KC_NO   }, \
+        { k80,    k81,    k82,    k83,    k84,    k85,    k86,     k87}, \
+        { KC_NO,  KC_NO  ,KC_NO  ,k93,    k94,    k95,    k96,     k97}, \
+        { KC_NO,  KC_NO  ,KC_NO  ,KC_NO,  kA4,    kA5,    kA6,     kA7}, \
+        { KC_NO,  KC_NO  ,KC_NO  ,kB3,    kB4,    kB5,    kB6,     kB7}, \
+        { KC_NO,  KC_NO  ,KC_NO  ,KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO}, \
+        { KC_NO,  KC_NO  ,KC_NO  ,kD3,    kD4,    kD5,    kD6,     kD7}, \
+        { KC_NO,  KC_NO  ,KC_NO  ,kE3,    kE4,    kE5,    kE6,     kE7}, \
+        { KC_NO,  KC_NO  ,KC_NO  ,KC_NO,  kF4,    kF5,    kF6,     kF7} \
+}
+
+
+/* Row pin configuration
+PF0		A
+PF1		B
+PF2		C
+PF3		G	0 = U4, 1 = U5
+
+				
+		     r0 r1	r2      r3      r4      r5      r6      r7      r8	r9	rA	rB	rC	rD	rE	rF	
+PB0		c0|  f6	f8	f7	5	4	3	2	1	=+								
+PB1		c1|  f3	f5	f4	t	r	e	w	q	TAB								
+PB2		c2| ESC	f2	f1	g	f	d	s	a	CL								
+PB3		c3|  f9	f11	f10	b	v	c	x	z	LS	UP		DN		[{	]}		
+PB4		c4|  f12 SL	PS	RT		LT	§±	`~		6	7	8		9	0	-_ 	
+PB5		c5|  PB	PGM	KPD							y	u	i		o	p	\	
+PB6		c6|  			LC	DL	BS	RC	EN	SP	h	j	k		l	;:	'"	
+PB7		c7|  				RA		PU		PD	n	m	,<		.>	/?	RS	
+ */
+
+
+
+
+#endif

keyboards/kinesis/alvicstep/config.h

@@ -0,0 +1,35 @@
+#ifndef ALVICSTEP_CONFIG_H
+#define ALVICSTEP_CONFIG_H
+
+#include "../config.h"
+
+/* USB Device descriptor parameter */
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+
+/* key matrix size */
+#define MATRIX_ROWS 16
+#define MATRIX_COLS  8 
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+//Passed through the port multipler, so 4 pins =16
+#define MATRIX_ROW_PINS { F0,F1, F2, F3  }
+
+// May be upside down. 
+#define MATRIX_COL_PINS { B0,B1, B2, B3, B4, B5, B6, B7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+ 
+
+#endif

keyboards/kinesis/alvicstep/readme.md

@@ -0,0 +1,46 @@
+kinesis-advantage keyboard firmware
+======================
+
+This directory is called alvicstep because https://github.com/alvicstep did the heavy work and took the photos in the doc directory.
+alvicstep did NOT do anything related to the QMK implementation, so don't bug him/her. 
+
+There are other ways of replacing the CPU in the kinesis, this one uses jumper wires from the Teensy to the original DIP socket
+
+
+## Kinesis specific information
+This is a port of https://github.com/alvicstep/tmk_keyboard, 
+which is a fork of https://github.com/wjanssens/tmk_keyboard, 
+which is based on work from https://github.com/chrisandreae/keyboard-firmware
+
+If you replace the kinesis CPU as described in the doc folder, then this code should allow you to use QMK. 
+I've tested with a Teensy 2++, remember to change the CPU if you use a 32u4 instead. 
+
+Not yet implemented: 
+- Kinesis EEProm reading or writing
+- Audio - this should be simple if we remove hardcoded pins from audio.h and switch to E7
+
+
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/kinesis-advantage folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+
+$ make keymap=[default|jack|<name>]
+
+Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`

keyboards/kinesis/alvicstep/rules.mk

@@ -0,0 +1,10 @@
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
+
+# just silently stop, since we need to upload with teensy uploader
+upload: build
+
+
+
+

keyboards/kinesis/config.h

@@ -22,58 +22,22 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0001
 #define MANUFACTURER    You
 #define PRODUCT         kinesis-advantage
 #define DESCRIPTION     A custom keyboard
 
 // Mouse
-#define MOUSEKEY_DELAY          20
+#define MOUSEKEY_DELAY          60
 #define MOUSEKEY_INTERVAL       20
 #define MOUSEKEY_MAX_SPEED      4
-#define MOUSEKEY_TIME_TO_MAX    20
+#define MOUSEKEY_TIME_TO_MAX    10
 #define MOUSEKEY_WHEEL_MAX_SPEED 1
 #define MOUSEKEY_WHEEL_DELTA 1
 #define MOUSEKEY_WHEEL_TIME_TO_MAX 1
 
-/* key matrix size */
-#define MATRIX_ROWS 16
-#define MATRIX_COLS  8 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-//Passed through the port multipler, so 4 pins =16
-#define MATRIX_ROW_PINS { F0,F1, F2, F3  }
-
-// May be upside down. 
-#define MATRIX_COL_PINS { B0,B1, B2, B3, B4, B5, B6, B7 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
- 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -171,4 +135,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
+
+
+#ifdef SUBPROJECT_alvicstep
+    #include "alvicstep/config.h"
+#endif
+#ifdef SUBPROJECT_stapelberg
+    #include "stapelberg/config.h"
+#endif
+
 #endif

keyboards/kinesis/keymaps/default/keymap.c

@@ -1,10 +1,6 @@
 #include "kinesis.h"
-#include "action_layer.h"
 
-#define QWERTY 0 // Base qerty
-#define SYMB 1// Symbol layer
-
-// An almost entirely blank keymap. Test layers with the upper right hand key - 1 in normal mode, reset in layer 2. 
+#define QWERTY 0 // Base qwerty
 
 
 /****************************************************************************************************
@@ -33,7 +29,6 @@
 *                                 `--------------------'         `--------------------'
 */
 
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [QWERTY] = KEYMAP(
            KC_ESC, KC_F1  ,KC_F2  ,KC_F3  ,KC_F4  ,KC_F5  ,KC_F6  ,KC_F7  ,KC_F8,
@@ -45,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 			   KC_LCTL,KC_LALT,
                                     KC_HOME,
                            KC_BSPC,KC_DEL ,KC_END ,
-        KC_F9  ,KC_F10 ,KC_F11 ,KC_F12 ,KC_PSCR ,KC_SLCK  ,KC_PAUS, KC_FN0, KC_1,
+    KC_F9  ,KC_F10 ,KC_F11 ,KC_F12 ,KC_PSCR ,KC_SLCK  ,KC_PAUS, KC_FN0, KC_1,
 	KC_6   ,KC_7   ,KC_8   ,KC_9   ,KC_0   ,KC_MINS,
 	KC_Y   ,KC_U   ,KC_I   ,KC_O   ,KC_P   ,KC_BSLS,
 	KC_H   ,KC_J   ,KC_K   ,KC_L   ,KC_SCLN,KC_QUOT,
@@ -54,32 +49,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
            KC_RGUI,KC_RCTL,
            KC_PGUP,
            KC_PGDN,KC_ENTER ,KC_SPC
-    ),
-[SYMB] = KEYMAP( 
-         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-	 KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-	 KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-	 KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-	 KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-	 	   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-	                     KC_TRNS,  KC_TRNS,
-				       KC_TRNS,
-		    KC_TRNS, KC_TRNS,  KC_TRNS,
-         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_FN0, RESET,
-	 KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-	 KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-	 KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-	 KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-	 	   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-	 KC_TRNS,  KC_TRNS,
-	 KC_TRNS,
-	 KC_TRNS,  KC_TRNS,  KC_TRNS
     )
 };
 
-const uint16_t PROGMEM fn_actions[] = {
-   [0] = ACTION_LAYER_TAP_TOGGLE(SYMB) ,               // FN1 - Momentary Layer 1 (Symbols)
 
+const uint16_t PROGMEM fn_actions[] = {
 
 };
 

keyboards/kinesis/keymaps/dvorak/keymap.c

@@ -0,0 +1,93 @@
+#include "kinesis.h"
+
+#define _DVORAK 0 // Base Dvorak layer
+#define _MEDIA 1  // Media layer
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_DVORAK] = KEYMAP(
+        // left hand
+        KC_ESC,   KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5, KC_F6, KC_F7, KC_F8,
+        KC_GRV,   KC_1,    KC_2,    KC_3,    KC_4,   KC_5,
+        KC_TAB,   KC_QUOT, KC_COMM, KC_DOT,  KC_P,   KC_Y,
+        KC_BSPC,  KC_A,    KC_O,    KC_E,    KC_U,   KC_I,
+        KC_LSFT,  KC_SCLN, KC_Q,    KC_J,    KC_K,   KC_X,
+                  KC_ESC,  KC_LBRC, KC_DOWN, KC_UP,
+        // left thumb
+                            KC_LGUI, KC_LCTL,
+                                     KC_LALT,
+                   KC_BSPC, KC_DEL,  TG(_MEDIA),
+        // right hand
+        KC_F9,  KC_F10,   KC_F11,   KC_F12,   KC_PSCR, KC_SLCK, KC_PAUS, KC_FN0, KC_1,
+        KC_6,   KC_7,     KC_8,     KC_9,     KC_0,    KC_EQL,
+        KC_F,   KC_G,     KC_C,     KC_R,     KC_L,    KC_SLSH,
+        KC_D,   KC_H,     KC_T,     KC_N,     KC_S,    KC_MINS,
+        KC_B,   KC_M,     KC_W,     KC_V,     KC_Z,    KC_RSFT,
+                          KC_LEFT,  KC_RIGHT, KC_RBRC, KC_BSLS,
+        // right thumb
+        KC_RCTL,    KC_RGUI,
+        KC_RALT,
+        TG(_MEDIA), KC_ENT, KC_SPC
+    ),
+
+[_MEDIA] = KEYMAP(
+       // left hand
+       KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO, KC_NO, KC_NO, KC_NO,
+       KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
+       KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,
+       KC_NO,   KC_BTN4, KC_BTN3, KC_BTN2, KC_BTN1, KC_NO,
+       KC_NO,   KC_NO,   KC_MUTE, KC_VOLD, KC_VOLU, KC_NO,
+                KC_NO,   KC_NO,   KC_MS_D, KC_MS_U,
+        // left thumb
+                                           KC_NO,   KC_NO,
+                                                    KC_NO,
+                                  KC_NO,   KC_NO,   KC_TRNS,
+       // right hand
+       KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+       KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_POWER,
+       KC_NO,   KC_VOLU, KC_MS_U, KC_VOLD, KC_NO,   KC_NO,
+       KC_NO,   KC_MS_L, KC_MS_D, KC_MS_R, KC_NO,   KC_NO,
+       KC_NO,   KC_MPRV, KC_MPLY, KC_MNXT, KC_NO,   KC_NO,
+                KC_MS_L, KC_MS_R, KC_NO,   KC_NO,
+       // right thumb
+       KC_NO, KC_NO,
+       KC_NO,
+       KC_TRNS, KC_ENT, KC_NO
+)
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/kinesis/keymaps/milestogo/Makefile

@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/kinesis/keymaps/milestogo/config.h

@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif

keyboards/kinesis/keymaps/milestogo/keymap.c

@@ -2,10 +2,10 @@
 #include "action_layer.h"
 #include "mousekey.h"
 
-#define QWERTY 0 // Base qerty
-#define SYMB 1// Symbol layer
-#define MOUSE 2//
-
+#define _QWERTY 0 // Base qerty
+#define _SYMB 1// Symbol layer
+#define _MOUSE 2//
+#define _TRANS 3//
 
 
 
@@ -20,27 +20,26 @@ enum {
 };
 
 
-// Borrowing very heavily from 
-// https://github.com/alvicstep/tmk_keyboard 
+// Why so many gui keys, why not just map all the OS X stuff to buttons? Good question.
 /****************************************************************************************************
 *
 * Keymap: Default Layer in Qwerty
 *
 * ,-------------------------------------------------------------------------------------------------------------------.
-* | Esc    |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F8  |  F9  |  F10 |  F12 |  FN0 |  FN1 |  FN2 |      |  bOOT  |
+* | ESC    |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F8  |  F9  |  F10 |  F12 |  FN0 |  FN1 |  FN2 |      |  bOOT  |
 * |--------+------+------+------+------+------+---------------------------+------+------+------+------+------+--------|
 * | =+     |  1!  |  2@  |  3#  |  4$  |  5%  |                           |  6^  |  7&  |  8*  |  9(  |  0)  | -_     |
 * |--------+------+------+------+------+------|                           +------+------+------+------+------+--------|
 * | Tab    |   Q  |   W  |   E  |   R  |   T  |                           |   Y  |   U  |   I  |   O  |   P  | \|     |
 * |--------+------+------+------+------+------|                           |------+------+------+------+------+--------|
-* |MouseFN1|   A  |   S  |   D  |   F  |   G  |                           |   H  |   J  |   K  |   L  |  ;:  | '"     |
+* |MouseFN0|   A  |   S  |   D  |   F  |   G  |                           |   H  |   J  |   K  |   L  |  ;:  | '"     |
 * |--------+------+------+------+------+------|                           |------+------+------+------+------+--------|
 * | Shift  |   Z  |   X  |   C  |   V  |   B  |                           |   N  |   M  |  ,.  |  .>  |  /?  | Shift  |
 * `--------+------+------+------+------+-------                           `------+------+------+------+------+--------'
-*          | `~   | ESC  |MOUSE1|MOUSE2|                                         | [{   |  ]}  | ESC  | GUI  |
+*          | ~`   | ESC  |GUI/L |L1/RT |                                         | L1/UP|GUI/DN| [{   | ]}   |
 *          `---------------------------'                                         `---------------------------'
 *                                        ,-------------.         ,-------------.
-*                                        | Ctrl | Alt  |         | Gui  | Ctrl |
+*                                        | CTRL | GUI  |         | ALT  | GUI |
 *                                 ,------|------|------|         |------+------+------.
 *                                 |      |      | Home |         | PgUp |      |      |
 *                                 | BkSp | Del  |------|         |------|Return| Space|
@@ -48,16 +47,15 @@ enum {
 *                                 `--------------------'         `--------------------'
 */
 
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[QWERTY] = KEYMAP(
+[_QWERTY] = KEYMAP(
            KC_ESC, KC_F1  ,KC_F2  ,KC_F3  ,KC_F4  ,KC_F5  ,KC_F6  ,KC_F7  ,KC_F8,
            KC_EQL, KC_1   ,KC_2   ,KC_3   ,KC_4   ,KC_5   ,
            KC_TAB, KC_Q   ,KC_W   ,KC_E   ,KC_R   ,KC_T   ,
-           KC_FN1 ,KC_A   ,KC_S   ,KC_D   ,KC_F   ,KC_G   ,
+           KC_FN0 ,KC_A   ,KC_S   ,KC_D   ,KC_F   ,KC_G   ,
            KC_LSFT,KC_Z   ,KC_X   ,KC_C   ,KC_V   ,KC_B   ,
-		KC_GRV  ,KC_ESC,  KC_BTN1,KC_BTN2,
-			   KC_LCTL,KC_LALT,
+              KC_GRAVE,  KC_ESC, KC_FN4, KC_FN5,
+			   KC_LCTL,KC_LGUI,
 			   KC_HOME,
                            KC_BSPC,KC_DEL ,KC_FN0 ,
         KC_F9  ,KC_F10 ,KC_F11 ,KC_F12 ,KC_FN0 ,KC_FN1  ,KC_FN2, KC_NO, RESET,
@@ -65,18 +63,45 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	KC_Y   ,KC_U   ,KC_I   ,KC_O   ,KC_P   ,KC_BSLS,
 	KC_H   ,KC_J   ,KC_K   ,KC_L   ,KC_SCLN,KC_QUOT,
 	KC_N   ,KC_M   ,KC_COMM,KC_DOT ,KC_SLSH,KC_RSFT,
-		KC_LBRC,KC_RBRC, KC_ESC, KC_RGUI,
-           KC_RGUI,KC_RCTL,
+		KC_FN6, KC_FN7,  KC_LBRC ,KC_RBRC, 
+           KC_RALT,KC_RGUI,
            KC_PGUP,
            KC_PGDN,KC_ENTER ,KC_SPC
     ),
-[SYMB] = KEYMAP( 
+
+/* _SYMBol level
+*
+* ,-------------------------------------------------------------------------------------------------------------------.
+* |        |      |      |      |      |      |      |      |      |      |      |      |      |      |      |  bOOT  |
+* |--------+------+------+------+------+------+---------------------------+------+------+------+------+------+--------|
+* |        |      |   *  |   #  |      |      |                           |      |      |      |      |      |        |
+* |--------+------+------+------+------+------|                           +------+------+------+------+------+--------|
+* |        |  /   |   [  |   ]  |      |      |                           |      |      |      |      |      |        |
+* |--------+------+------+------+------+------|                           |------+------+------+------+------+--------|
+* |        |      |  {   |   }  |      |     |                           |      |      |      |      |      |        |
+* |--------+------+------+------+------+------|                           |------+------+------+------+------+--------|
+* |        |   =  |  (   |   )  |      |      |                            |      |      |      |      |      |        |
+* `--------+------+------+------+------+-------                           `------+------+------+------+------+--------'
+*          |      |      |GUI/L |L1/RT |                                         | L1/UP|GUI/DN|  { |    }  |
+*          `---------------------------'                                         `---------------------------'
+*                                        ,-------------.         ,-------------.
+*                                        | CTRL | GUI  |         | ALT  | GUI |
+*                                 ,------|------|------|         |------+------+------.
+*                                 |      |      | Home |         | PgUp |      |      |
+*                                 | BkSp | Del  |------|         |------|Mouse1|Mouse2|
+*                                 |      |      | End  |         | PgDn |LClick|Rclick|
+*                                 `--------------------'         `--------------------'
+*/
+
+
+
+[_SYMB] = KEYMAP( 
          KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-                   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+         KC_TRNS,  KC_TRNS,  KC_ASTR,  KC_HASH,  KC_TRNS,  KC_TRNS,
+         KC_TRNS,  KC_SLSH,  KC_LBRC,  KC_RBRC,    KC_TRNS,  KC_TRNS,
+         KC_TRNS,  KC_TRNS,  RSFT(KC_LBRC),  RSFT(KC_RBRC),  KC_TRNS,  KC_TRNS,
+         KC_TRNS,  KC_EQL,  RSFT(KC_9),  RSFT(KC_0),  KC_TRNS,  KC_TRNS,
+                   KC_TRNS,  KC_TRNS,  KC_FN4, KC_FN5,
                              KC_TRNS,  KC_TRNS,
                                        KC_TRNS,
                     KC_TRNS, KC_TRNS,  KC_TRNS,
@@ -85,7 +110,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
          KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
          KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
          KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-                   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+                   KC_FN6, KC_FN7,   KC_TRNS,  KC_TRNS,
          KC_TRNS,  KC_TRNS,
          KC_TRNS,
          KC_TRNS,  KC_TRNS,  KC_TRNS
@@ -103,7 +128,55 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 * |--------+------+------+------+------+------|                           |------+------+------+------+------+--------|
 * |        | GuiZ | GUI X| GUI C| GUI_V|PgDown|                           | MWD  | MDown|MS Dwn|MS_DR  |  ?  |        |
 * `--------+------+------+------+------+-------                           `------+------+------+------+------+--------'
-*          | `~   | ESC  |   <  |   >  |                                         |  {   |   }  | ESC  |      |
+*          | `~   | ESC  |      |      |                                         |      |      |  {  |    }  |
+*          `---------------------------'                                         `---------------------------'
+*                                        ,-------------.         ,-------------.
+*                                        | CTRL | GUI  |         | ALT  | GUI  |
+*                                 ,------|------|------|         |------+------+------.
+*                                 |      |      | Home |         | PgUp |      |      |
+*                                 | BkSp | Del  |------|         |------|Mouse1|Mouse2|
+*                                 |      |      | End  |         | PgDn |LClick|Rclick|
+*                                 `--------------------'         `--------------------'
+*/
+
+
+[_MOUSE] = KEYMAP(
+         KC_CAPS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+         KC_TRNS,  KC_EXLM  ,KC_AT,    KC_HASH,  KC_DLR   ,KC_PERC   ,
+         KC_TRNS,  KC_NO,    KC_NO,    KC_UP,    KC_NO,    KC_PGUP,
+         KC_FN1,  LCTL(KC_A),KC_LEFT,  KC_DOWN,  KC_RIGHT, LCTL(KC_E),
+         KC_TRNS, LGUI(KC_Z),LGUI(KC_X),LGUI(KC_C),LGUI(KC_V),KC_PGDN,
+                   KC_TRNS,  KC_TRNS,  KC_NO,  KC_NO,
+                             KC_TRNS,  KC_TRNS,
+                                       KC_TRNS,
+                    KC_TRNS, KC_TRNS,  KC_TRNS,
+         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_FN0,RESET, 
+         KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_RPRN,  KC_ACL2,  
+         KC_WH_U,  M(A_MUL), KC_MS_U,  M(A_MUR), KC_NO,  KC_ACL1,
+         KC_NO,    KC_MS_L,  KC_MS_D,  KC_MS_R,  KC_NO,  KC_ACL0,
+         KC_WH_D,  M(A_MDL), KC_MS_D,  M(A_MDR), RSFT(KC_LBRC), RSFT(KC_RBRC),
+                   KC_LCBR,  KC_RCBR,  KC_NO,  KC_NO,
+         KC_TRNS,  KC_TRNS,
+         KC_TRNS,
+         KC_TRNS,  KC_BTN1,  KC_BTN2
+    ),
+
+
+
+/* EMPTY
+*
+* ,-------------------------------------------------------------------------------------------------------------------.
+* |        |      |      |      |      |      |      |      |      |      |      |      |      |      |      |  bOOT  |
+* |--------+------+------+------+------+------+---------------------------+------+------+------+------+------+--------|
+* |        |      |      |      |      |      |                           |      |      |      |      |      |        |
+* |--------+------+------+------+------+------|                           +------+------+------+------+------+--------|
+* |        |      |      |      |      |      |                           |      |      |      |      |      |        |
+* |--------+------+------+------+------+------|                           |------+------+------+------+------+--------|
+* |        |      |      |      |      |      |                           |      |      |      |      |      |        |
+* |--------+------+------+------+------+------|                           |------+------+------+------+------+--------|
+* |        |      |      |      |      |      |                           |      |      |      |      |      |        |
+* `--------+------+------+------+------+-------                           `------+------+------+------+------+--------'
+*          |      |      |      |      |                                         |      |      |    |      |
 *          `---------------------------'                                         `---------------------------'
 *                                        ,-------------.         ,-------------.
 *                                        | Ctrl | Alt  |         | Gui  | Ctrl |
@@ -115,34 +188,41 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 */
 
 
-[MOUSE] = KEYMAP(
-         KC_CAPS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-         KC_TRNS,  KC_EXLM  ,KC_AT,    KC_HASH,  KC_DLR   ,KC_PERC   ,
-         KC_TRNS,  KC_NO,    KC_NO,    KC_UP,    KC_NO,    KC_PGUP,
-         KC_FN1,  LCTL(KC_A),KC_LEFT,  KC_DOWN,  KC_RIGHT, LCTL(KC_E),
-         KC_TRNS, LGUI(KC_Z),LGUI(KC_X),LGUI(KC_C),LGUI(KC_V),KC_PGDN,
-                   KC_TRNS,  KC_TRNS,  KC_LABK,  KC_RABK,
+
+[_TRANS] = KEYMAP( 
+         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+          KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+         KC_TRNS,  KC_TRNS,  KC_FN10,  KC_FN11,  KC_TRNS,  KC_TRNS,
+                   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
                              KC_TRNS,  KC_TRNS,
                                        KC_TRNS,
                     KC_TRNS, KC_TRNS,  KC_TRNS,
-         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_FN0,RESET, 
-         KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_RPRN,  KC_ACL2,  
-         KC_WH_U,  M(A_MUL), KC_MS_U,  M(A_MUR), KC_NO,  KC_ACL1,
-         KC_NO,    KC_MS_L,  KC_MS_D,  KC_MS_R,  KC_NO,  KC_ACL0,
-         KC_WH_D,  M(A_MDL), KC_MS_D,  M(A_MDR), KC_TRNS, KC_TRNS,
-                   KC_LCBR,  KC_RCBR,  KC_ESC,  KC_TRNS,
+         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_FN0, KC_2,
+         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+         KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+                   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
          KC_TRNS,  KC_TRNS,
          KC_TRNS,
-         KC_TRNS,  KC_BTN1,  KC_BTN2
+         KC_TRNS,  KC_TRNS,  KC_TRNS
     ),
     
     
 };
 
+
+
 const uint16_t PROGMEM fn_actions[] = {
-   [0] = ACTION_LAYER_TAP_TOGGLE(MOUSE) ,               // FN1 - Momentary Layer 1 (Symbols)
-   [1] = ACTION_LAYER_TOGGLE(MOUSE) ,               // FN1 - Momentary Layer 1 (Symbols)
-   [2] = ACTION_LAYER_TAP_TOGGLE(SYMB) ,               // FN1 - Momentary Layer 1 (Symbols)
+   [0] = ACTION_LAYER_TAP_TOGGLE(_MOUSE) ,             
+   [1] = ACTION_LAYER_TOGGLE(_MOUSE) ,                
+   [2] = ACTION_LAYER_TAP_TOGGLE(_SYMB) ,              
+	[5]= ACTION_LAYER_TAP_KEY(_SYMB,KC_RIGHT), 
+	[4]= ACTION_MODS_TAP_KEY(MOD_LGUI,KC_LEFT),
+	[6]= ACTION_LAYER_TAP_KEY(_SYMB,KC_UP), 
+	[7]= ACTION_MODS_TAP_KEY(MOD_LGUI,KC_DOWN),
 
 	
 };
@@ -214,18 +294,23 @@ void matrix_init_user(void) {
 }
 
 void matrix_scan_user(void) {
+
+#ifdef ALVICSTEP_CONFIG_H
  int8_t layer = biton32(layer_state);
 
         switch (layer) {
         case 1:
-                all_led_off();
-                break;
-        case 2:
                 if (!(host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK))) {
                         all_led_off();
                         caps_lock_led_on();
                 }
                 break;
+                
+        case 2:
+                if (!(host_keyboard_leds() & (1 << USB_LED_SCROLL_LOCK))) {
+                        all_led_off();
+                        scroll_lock_led_on();
+                }
         case 0:
                 all_led_off();
                 num_lock_led_on();
@@ -233,6 +318,7 @@ void matrix_scan_user(void) {
         default:
                 break;
         }
+#endif
 
 }
 

keyboards/kinesis/kinesis.c

@@ -1,106 +1 @@
 #include "kinesis.h"
-
-// begin section origin  https://github.com/alvicstep/tmk_keyboard 
-
-
-void all_led_off(void)
-{
-        PORTD = 0b11111111;
-}
-
-void all_led_on(void)
-{
-        PORTD = 0b00000000;
-}
-void num_lock_led_on(void)
-{
-        PORTD = 0b11101111;
-}
-
-void caps_lock_led_on(void)
-{
-        PORTD = 0b01111111;
-}
-
-void scroll_lock_led_on(void)
-{
-        PORTD = 0b11011111;
-}
-void keypad_led_on(void)
-{
-        PORTD = 0b10111111;
-}
-void blink_all_leds(void)
-{
-        all_led_on();
-        _delay_ms(500);
-
-        all_led_off();
-        _delay_ms(100);
-
-        caps_lock_led_on();
-        _delay_ms(100);
-
-	 num_lock_led_on();
-        _delay_ms(100);
-
-        scroll_lock_led_on();
-        _delay_ms(100);
-
-         keypad_led_on();
-        _delay_ms(100);
-
-        //back
-
-        scroll_lock_led_on();
-        _delay_ms(100);
-
-        num_lock_led_on();
-        _delay_ms(100);
-
-        caps_lock_led_on();
-        _delay_ms(100);
-
-        all_led_off();
-}
-
-// End section origin  https://github.com/alvicstep/tmk_keyboard 
-
- void matrix_init_kb(void) {
-	  blink_all_leds();
-	  matrix_init_user();
-}
-
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-//Copyright 2014 Warren Janssens <warren.janssens@gmail.com>
-   uint8_t leds = 0xF0;
-    if (usb_led & 1 << USB_LED_NUM_LOCK)
-        leds &= ~0x10;
-    if (usb_led & 1 << USB_LED_CAPS_LOCK)
-        leds &= ~0x80;
-    if (usb_led & 1 << USB_LED_SCROLL_LOCK)
-        leds &= ~0x20;
-    PORTD = (PORTD & 0x0F) | leds;
-
-	led_set_user(usb_led);
-
-}
-
-

keyboards/kinesis/kinesis.h

@@ -1,67 +1,23 @@
 #ifndef KINESIS_H
 #define KINESIS_H
 
+#ifdef SUBPROJECT_alvicstep
+	#include "alvicstep.h"
+#endif
+#ifdef SUBPROJECT_stapelberg
+	#include "stapelberg.h"
+#endif
+
 #include "quantum.h"
 
 
-// The first section contains all of the arguements
-// The second converts the arguments into a two-dimensional array
+void all_led_off(void);
+void all_led_on(void);
+void num_lock_led_on(void);
+void caps_lock_led_on(void);
+void scroll_lock_led_on(void);
+void keypad_led_on(void);
 
-#define KEYMAP(                           \
-    k02,k22,k12,k01,k21,k11,k00,k20,k10,  \
-    k80,k70,k60,k50,k40,k30,              \
-    k81,k71,k61,k51,k41,k31,              \
-    k82,k72,k62,k52,k42,k32,              \
-    k83,k73,k63,k53,k43,k33,              \
-        k74,k64,k54,k34,                  \
-                        k36,k35,          \
-                            k55,          \
-                    k56,k46,k75,          \
-    k03,k23,k13,k04,k24,k14,k05,k85,k84,  \
-        k94,kA4,kB4,kD4,kE4,kF4,          \
-        k95,kA5,kB5,kD5,kE5,kF5,          \
-        k96,kA6,kB6,kD6,kE6,kF6,          \
-        k97,kA7,kB7,kD7,kE7,kF7,          \
-            k93,kB3,kD3,kE3,              \
-    k47,k66,                              \
-    k67,                                  \
-    k87,k76,k86                           \
-) {                                       \
-        { k00,    k01,    k02,    k03,    k04,    k05,    KC_NO,   KC_NO   }, \
-        { k10,    k11,    k12,    k13,    k14,    KC_NO,  KC_NO,   KC_NO   }, \
-        { k20,    k21,    k22,    k23,    k24,    KC_NO,  KC_NO,   KC_NO   }, \
-        { k30,    k31,    k32,    k33,    k34,    k35,    k36,     KC_NO   }, \
-        { k40,    k41,    k42,    k43,    KC_NO,  KC_NO,  k46,     k47     }, \
-        { k50,    k51,    k52,    k53,    k54,    k55,    k56,     KC_NO   }, \
-        { k60,    k61,    k62,    k63,    k64,    KC_NO,  k66,     k67     }, \
-        { k70,    k71,    k72,    k73,    k74,    k75,    k76,     KC_NO   }, \
-        { k80,    k81,    k82,    k83,    KC_NO  ,KC_NO,  k86,     k87}, \
-        { KC_NO,  KC_NO  ,KC_NO  ,k93,    k94,    k95,    k96,     k97}, \
-        { KC_NO,  KC_NO  ,KC_NO  ,KC_NO,  kA4,    kA5,    kA6,     kA7}, \
-        { KC_NO,  KC_NO  ,KC_NO  ,kB3,    kB4,    kB5,    kB6,     kB7}, \
-        { KC_NO,  KC_NO  ,KC_NO  ,KC_NO,  KC_NO,  KC_NO,  k84,     k85}, \
-        { KC_NO,  KC_NO  ,KC_NO  ,kD3,    kD4,    kD5,    kD6,     kD7}, \
-        { KC_NO,  KC_NO  ,KC_NO  ,kE3,    kE4,    kE5,    kE6,     kE7}, \
-        { KC_NO,  KC_NO  ,KC_NO  ,KC_NO,  kF4,    kF5,    kF6,     kF7} \
-}
-
-
-/*    4y0   A  4y1   B  4y2      4y3   D  4y4   E  4y5   F  4y6   G  4y7   H  5y0   I  5y1   J  5y2   K  5y3   L  5y4   M  5y5   N  5y6   O  5y7  P  */
-
-/*
-					0	1	2	3	4	5	6	7	8	9	A	B	C	D	E	F
-                                        A       B       C       D       E       F       G       H       I       J       K       L       M       N       O       P
-                                        4y0     4y1     4y2     4y3     4y4     4y5     4y6     4y7     5y0     5y1     5y2     5y3     5y4     5y5     5y6     5y7
-                                        r0      r1      r2       r3 r4  r5      r6      r7      r8      r9      r10     r11     r12     r13     r14     r15
-0       PB0             21      c0      f6      f8      f7      5       4       3       2       1       =+
-1       PB1             22      c1      f3      f5      f4      t       r       e       w       q       TAB
-2       PB2             23      c2      ESC     f2      f1      g       f       d       s       a       CL
-3       PB3             24      c3      f9      f11     f10     b       v       c       x       z       LS      UP              DN              [{      ]}
-4       PB4             25      c4  f12 SL      PS      RT              LT      §±      `~              6       7       8               9       0       -_
-5       PB5             26      c5      PB      PGM     KPD     LA              HM              END             y       u       i               o       p       \
-6       PB6             27      c6                      LC      DEL     BS      RC      ENT     SP      h       j       k               l       ;:      '"
-7       PB7             28      c7                                      RA              PU              PD      n       m       ,<              .>      /?      RS
-*/
 
 
 #endif

keyboards/kinesis/readme.md

@@ -1,42 +1,12 @@
-kinesis-advantage keyboard firmware
-======================
+# Firmware for the Kinesis advantage keyboard
 
-## Kinesis specific information
-This is a port of https://github.com/alvicstep/tmk_keyboard, 
-which is a fork of https://github.com/wjanssens/tmk_keyboard, 
-which is based on work from https://github.com/chrisandreae/keyboard-firmware
+There are at least two different ways to replace the controller in this keyboard.
 
-If you replace the kinesis CPU as described in the doc folder, then this code should allow you to use QMK. 
-I've tested with a Teensy 2++, remember to change the CPU if you use a 32u4 instead. 
+The Stapelberg folder contains the docs and configuration for using the custom controller created by Michael Stapelberg.
 
-Not yet implemented: 
-- Kinesis EEProm reading or writing
-- Audio - this should be simple if we remove hardcoded pins from audio.h and switch to E7
+The alvicstep folder contains docs and configuration for directly wiring a  Teensy2++ to the existing controller board. This follows the pinouts described in https://github.com/alvicstep/tmk_keyboard, which is where the name comes from. 
+
+## Keymaps
+Both hardware solutions should work with the same keymaps
 
 
-
-## Quantum MK Firmware
-
-For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
-
-## Building
-
-Download or clone the whole firmware and navigate to the keyboards/kinesis-advantage folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
-
-Depending on which keymap you would like to use, you will have to compile slightly differently.
-
-### Default
-
-To build with the default keymap, simply run `make default`.
-
-### Other Keymaps
-
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
-
-To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
-
-```
-$ make [default|jack|<name>]
-```
-
-Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`

keyboards/kinesis/stapelberg/Makefile

@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../../Makefile
+endif

keyboards/kinesis/stapelberg/config.h

@@ -0,0 +1,50 @@
+#ifndef STAPELBERG_CONFIG_H
+#define STAPELBERG_CONFIG_H
+
+#include "../config.h"
+
+/* USB Device descriptor parameter */
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0002
+
+/* key matrix size */
+#define MATRIX_ROWS 15
+#define MATRIX_COLS  7 
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4, D5, D6, D7, C0, C1, C2, C3, C4, C5, C6 }
+#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+ 
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* don't know if this should be defined at the board or top level. Assuming board 
+#define MOUSEKEY_DELAY          100
+#define MOUSEKEY_INTERVAL       20
+#define MOUSEKEY_MAX_SPEED      3
+#define MOUSEKEY_TIME_TO_MAX    10
+*/
+
+#define IGNORE_MOD_TAP_INTERRUPT
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+#endif

keyboards/kinesis/stapelberg/readme.md

@@ -0,0 +1,55 @@
+# kinesis_stapelberg keyboard firmware
+
+This folder contains the firmware customization required to run QMK on the custom controller for the Kinesis Advantage created by Michael Stapelberg.
+It differs from the `alvicstep keyboard in that the existing QMK Kinesis Advantage project uses the existing controller board provided by Kinesis.
+
+The controller board hardware is described
+[here](http://michael.stapelberg.de/Artikel/kinesis_custom_controller)
+
+Mapping the pin assignments was done using the corresponding matrix description provided at this
+[link](https://github.com/stapelberg/kinesis-firmware/blob/master/kb_kinesis/config.kspec)
+
+This code makes no attempt to drive the four LEDs provided on the controller board.
+
+
+## Building the Hardware
+
+If you want to perform this customization, these parts may be helpful.
+
+| Function                                               | Quantity | Vendor   | Part Number  |
+| ------------------------------------------------------ | -------- | -------  | ------------ |
+| 13 pin connector for function keys and finger keywells | 4        | Digi-Key | WM14526-ND   |
+| 10 pin headers for thumb clusters                      | 4        | Digi-Key | 609-3250-ND  |
+| 8 pin cable for thumb clusters                         | 2        | Digi-Key | SAM8928-ND   |
+| Teensy++ 2.0                                           | 1        | Digi-Key | 1528-1056-ND |
+| 2 pin right angle header for reset                     | 1        | Digi-Key | 3M9467-ND    |
+| Reset cables                                           | 2        | Sparkfun | PRT-09140    |
+
+The board and connections are shown here
+![](images/controller_board.jpg)
+
+The Teensy mounting detail can be seen here.
+I used a socket for prototyping.
+![](images/teensy_detail.jpg)
+
+
+Since the proper mounting of the Teensy board places the reset button in a tight space, I added a 2-pin header to the reset and ground pins on the edge of the board.
+Shorting these two pins together will reset the board.
+I also put female to male header jumper cables on these so they could be accessed outside the enclosure.
+The exterior cables can be seen here.
+![](images/exterior_reset.jpg)
+
+
+## Keymaps
+
+### Default
+
+To build with the default keymap, run `make default` while in the
+`kinesis_stapelberg` working directory.
+
+### Dvorak
+
+This keymap contains a dvorak implementation as well as media and symbol layers.
+
+Run `make dvorak` while in the `kinesis_stapelberg` working directory.
+

keyboards/kinesis/stapelberg/rules.mk

@@ -0,0 +1,10 @@
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
+
+# just silently stop, since we need to upload with teensy uploader
+upload: build
+
+
+
+

keyboards/kinesis/stapelberg/stapelberg.c

@@ -0,0 +1,28 @@
+#include "stapelberg.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/kinesis/stapelberg/stapelberg.h

@@ -0,0 +1,72 @@
+#ifndef KINESIS_STAPELBERG_H
+#define KINESIS_STAPELBERG_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments as on the physical keyboard
+// The second converts the arguments into the 2-D scanned array
+
+#define KEYMAP(                           \
+    kC0,kD0,kE0,kC1,kD1,kE1,kC2,kD2,kE2,  \
+    k00,k10,k20,k30,k40,k50,              \
+    k01,k11,k21,k31,k41,k51,              \
+    k02,k12,k22,k32,k42,k52,              \
+    k03,k13,k23,k33,k43,k53,              \
+        k14,k24,k34,k54,                  \
+                        k56,k55,          \
+                            k35,          \
+                    k36,k46,k25,          \
+    kC3,kD3,kE3,kC4,kD4,kE4,kC5,kE5,kD5,  \
+        k60,k70,k80,k90,kA0,kB0,          \
+        k61,k71,k81,k91,kA1,kB1,          \
+        k62,k72,k82,k92,kA2,kB2,          \
+        k63,k73,k83,k93,kA3,kB3,          \
+            k64,k84,k94,kA4,              \
+    k96,k85,                              \
+    k86,                                  \
+    k66,k75,k65                           \
+) {                                       \
+        { k00,    k01,    k02,    k03,    KC_NO,  KC_NO,  KC_NO }, \
+        { k10,    k11,    k12,    k13,    k14,    KC_NO,  KC_NO }, \
+        { k20,    k21,    k22,    k23,    k24,    k25,    KC_NO }, \
+        { k30,    k31,    k32,    k33,    k34,    k35,    k36   }, \
+        { k40,    k41,    k42,    k43,    KC_NO,  KC_NO,  k46   }, \
+        { k50,    k51,    k52,    k53,    k54,    k55,    k56   }, \
+        { k60,    k61,    k62,    k63,    k64,    k65,    k66   }, \
+        { k70,    k71,    k72,    k73,    KC_NO,  k75,    KC_NO }, \
+        { k80,    k81,    k82,    k83,    k84,    k85,    k86   }, \
+        { k90,    k91,    k92,    k93,    k94,    KC_NO,  k96   }, \
+        { kA0,    kA1,    kA2,    kA3,    kA4,    KC_NO,  KC_NO }, \
+        { kB0,    kB1,    kB2,    kB3,    KC_NO,  KC_NO,  KC_NO }, \
+        { kC0,    kC1,    kC2,    kC3,    kC4,    kC5,    KC_NO }, \
+        { kD0,    kD1,    kD2,    kD3,    kD4,    kD5,    KC_NO }, \
+        { kE0,    kE1,    kE2,    kE3,    kE4,    kE5,    KC_NO } \
+}
+
+/*
+This is the Stapelberg matrix as published at
+https://github.com/stapelberg/kinesis-firmware/blob/master/kb_kinesis/config.kspec
+Along with the pins for each row and column
+             PB0 PB1 PB2 PB3 PB4 PB5 PB6
+             kx0 kx1 kx2 kx3 kx4 kx5 kx6
+PD0 k0x Row: EQL TAB CAP LSH X2  --  --
+PD1 k1x Row: 1   Q   A   Z   BQ  --  --
+PD2 k2x Row: 2   W   S   X   INS END --
+PD3 k3x Row: 3   E   D   C   LFT HOM BAK
+PD4 k4x Row: 4   R   F   V   --  --  DEL
+PD5 k5x Row: 5   T   G   B   RT  LAL LCT
+PD6 k6x Row: 6   Y   H   N   UP  SPC PGD
+PD7 k7x Row: 7   U   J   M   --  RET --
+PB0 k8x Row: 8   I   K   COM DWN RCT PGU
+PB1 k9x Row: 9   O   L   PER LBR --  RAL
+PB2 kAx Row: 0   P   SEM SLA RBR --  --
+PB3 kBx Row: MIN BSL APO RSH X1  --  --
+PB4 kCx Row: ESC F3  F6  F9  F12 PAU --
+PB5 kDx Row: F1  F4  F7  F10 PRT PRG --
+PB6 kEx Row: F2  F5  F8  F11 SLK KEY --
+*/
+
+
+
+#endif

keyboards/planck/keymaps/vifon/Makefile

@@ -1,6 +1,3 @@
-# Please remove if no longer applicable
-$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD)
-$(warning Please disable some options in the Makefile to resolve)
 
 
 # Build Options
@@ -10,7 +7,7 @@ $(warning Please disable some options in the Makefile to resolve)
 BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+CONSOLE_ENABLE = no         # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality

keyboards/planck/keymaps/vifon/config.h

@@ -81,6 +81,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* prevent the modifiers from being stuck, sacrificing some memory */
 #define PREVENT_STUCK_MODIFIERS
 
+/* A larger buffer for the dynamic macros as this keymap is not taking
+ * up that much memory.
+ */
+#define DYNAMIC_MACRO_SIZE 256
+
 #ifdef SUBPROJECT_rev3
     #include "rev3/config.h"
 #endif

keyboards/planck/keymaps/vifon/keymap.c

@@ -62,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_PPG] = { /* Pure Pro: Gaming */
     {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
     {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
-    {_______, _______, _______, _______, _______, _______, _______, _______, _______, DF(_RS), _______, _______},
+    {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
     {_______, _______, XXXXXXX, _______, KM_RS  , _______, _______, KM_LW  , _______, _______, _______, _______},
 },
 [_NM] = { /* Numeric */
@@ -90,7 +90,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     {_______, _______, KC_LGUI, KC_LALT, _______, _______,     _______,        _______, _______, _______, _______, _______}
 },
 [_DYN]= { /* special */
-    {_______,  DYN_REC_START1, DYN_MACRO_PLAY1, _______, _______, _______, _______, _______, KC_INS,  _______, KC_PSCR, KC_PAUS},
+    {_______,  DYN_REC_START1, DYN_MACRO_PLAY1, _______, _______, _______, _______, KC_APP,  KC_INS,  _______, KC_PSCR, KC_PAUS},
     {_______,  DYN_REC_START2, DYN_MACRO_PLAY2, _______, _______, _______, _______, _______, _______, KC_CAPS, KC_SLCK, KC_NLCK},
     {KM_SHLK,  _______,        _______,         _______, _______, _______, _______, _______, _______, _______, _______, _______},
     {_______,  _______,        _______,         _______, _______, _______, _______, _______, _______, _______, _______, _______}

keyboards/readme.md

@@ -51,5 +51,6 @@ These keyboards are part of the QMK repository, but their manufacturers are not
 * [S60-x](/keyboards/s60-x) — DIY compact keyboard designed by VinnyCordeiro for Sentraq.
 * [Satan](/keyboards/satan) — A GH60 variant.
 * [SixKeyBoard](/keyboards/sixkeyboard) — A 6-key keyboard made by TechKeys.
-* [TheVan 44](/keyboars/tv44) — A 44-key staggered keybard by Evangs.
+* [TheVan 44](/keyboards/tv44) — A 44-key staggered keybard by Evangs.
+* [WhiteFox](/keyboards/whitefox) — A 65% keyboard designed as a partnership by matt3o, Massdrop and Input Club
 * [Vision Division](/keyboards/vision_division) — Full Size / Split Linear Keyboard by IBNobody.

keyboards/tv44/keymaps/default/keymap.c

@@ -30,7 +30,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_QW] = { /* Qwerty */
     {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
     {MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, MO(_L1) },
-    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_F,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2) },
+    {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2) },
     {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  KC_RALT, KC_ESC,  XXXXXXX, TG(_L3) }
   },
   [_DV] = { /* Dvorak */

keyboards/whitefox/Makefile

@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif

keyboards/whitefox/bootloader_defs.h

@@ -0,0 +1 @@
+#define KIIBOHD_BOOTLOADER

keyboards/whitefox/chconf.h

@@ -0,0 +1,524 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 100000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/whitefox/config.h

@@ -0,0 +1,78 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define PREVENT_STUCK_MODIFIERS
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0F0F
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER "Input Club"
+#define USBSTR_MANUFACTURER    'I', '\x00', 'n', '\x00', 'p', '\x00', 'u', '\x00', 't', '\x00', ' ', '\x00', 'C', '\x00', 'l', '\x00', 'u', '\x00', 'b', '\x00'
+#define PRODUCT "WhiteFox/QMK"
+#define USBSTR_PRODUCT         'W', '\x00', 'h', '\x00', 'i', '\x00', 't', '\x00', 'e', '\x00', 'F', '\x00', 'o', '\x00', 'x', '\x00', ' ', '\x00'
+
+/* key matrix size */
+#define MATRIX_ROWS 9
+#define MATRIX_COLS 8
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    6
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Keymap for Infinity prototype */
+//#define INFINITY_PROTOTYPE
+
+/* Keymap for Infinity 1.1a (first revision with LED support) */
+//#define INFINITY_LED
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboards/whitefox/halconf.h

@@ -0,0 +1,353 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */

keyboards/whitefox/keymaps/default/keymap.c

@@ -0,0 +1,51 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "whitefox.h"
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Layer 0: Default Layer
+     * ,---------------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|Ins|
+     * |---------------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Backs|Del|
+     * |---------------------------------------------------------------|
+     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter   |PgU|
+     * |---------------------------------------------------------------|
+     * |Shif|   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Up |PgD|
+     * |---------------------------------------------------------------|
+     * |Ctrl|Gui |Alt |         Space    |Fn0 |Alt |Gui |  |Lef|Dow|Rig|
+     * `---------------------------------------------------------------'
+     */
+    [0] = KEYMAP( \
+        KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSLS,KC_GRV, KC_INS, \
+        KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSPC,     KC_DEL, \
+        KC_CAPS,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT,      KC_PGUP,\
+        KC_LSFT,KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,     KC_UP,  KC_PGDN,\
+        KC_LCTL,KC_LGUI,KC_LALT,               KC_SPC,           KC_RALT,KC_FN0, KC_RCTL,     KC_LEFT,KC_DOWN,KC_RGHT \
+    ),
+    [1] = KEYMAP( \
+        KC_TRNS,KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_TRNS,KC_TRNS,KC_MUTE,\
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,     KC_TRNS,\
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,     KC_VOLU,\
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,     KC_PGUP,KC_VOLD,\
+        KC_TRNS,KC_TRNS,KC_TRNS,               KC_TRNS,          KC_TRNS,KC_TRNS,KC_TRNS,     KC_HOME,KC_PGDN,KC_END  \
+    ),
+};
+
+const uint16_t fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(1),
+};

keyboards/whitefox/keymaps/matt3o/keymap.c

@@ -0,0 +1,92 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "whitefox.h"
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Layer 0: Default Layer
+     * ,---------------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|Ins|
+     * |---------------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Backs|Del|
+     * |---------------------------------------------------------------|
+     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter   |PgU|
+     * |---------------------------------------------------------------|
+     * |Shif|   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Up |PgD|
+     * |---------------------------------------------------------------|
+     * |Ctrl|Gui |Alt |         Space    |Fn0 |Alt |Gui |  |Lef|Dow|Rig|
+     * `---------------------------------------------------------------'
+     */
+    [0] = KEYMAP( \
+        KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSLS,KC_GRV, KC_MUTE,\
+        KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSPC,     KC_DEL, \
+        KC_FN0, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT,      KC_PGUP,\
+        KC_LSFT,KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,     KC_UP,  KC_PGDN,\
+        KC_LCTL,KC_LGUI,KC_LALT,               KC_SPC,           KC_RALT,KC_FN1, KC_RCTL,     KC_LEFT,KC_DOWN,KC_RGHT \
+    ),
+    [1] = KEYMAP( \
+        KC_TRNS,KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_TRNS,KC_TRNS,KC_TRNS,\
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_DEL ,     KC_INS ,\
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,     KC_VOLU,\
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,     KC_PGUP,KC_VOLD,\
+        KC_TRNS,KC_TRNS,KC_TRNS,               KC_TRNS,          KC_TRNS,KC_TRNS,KC_TRNS,     KC_HOME,KC_PGDN,KC_END  \
+    ),
+    [2] = KEYMAP( \
+        KC_SLEP,KC_P1,  KC_P2,  KC_P3,  KC_P4,  KC_P5,  KC_P6,  KC_P7,  KC_P8,  KC_P9,  KC_P0,  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_FN2, \
+        KC_TRNS,KC_TRNS,KC_FN5 ,KC_FN6 ,KC_TRNS,KC_FN7 ,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_TRNS,KC_TRNS,KC_TRNS,     KC_FN3, \
+        KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_FN4 ,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,     KC_TRNS,\
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_CALC,KC_TRNS,KC_TRNS,KC_TRNS,KC_MAIL,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,     KC_TRNS,KC_TRNS,\
+        KC_TRNS,KC_TRNS,KC_TRNS,               KC_TRNS,          KC_TRNS,KC_TRNS,KC_TRNS,     KC_TRNS,KC_TRNS,KC_TRNS \
+    ),
+};
+
+/* Give numbers some descriptive names */
+#define ACTION_LEDS_ALL 1
+#define ACTION_LEDS_GAME 2
+
+const uint16_t fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(1),
+    [1] = ACTION_LAYER_MOMENTARY(2),
+    [2] = ACTION_FUNCTION(ACTION_LEDS_ALL),
+    [3] = ACTION_FUNCTION(ACTION_LEDS_GAME),
+
+    [4] = ACTION_USAGE_CONSUMER(0x1B4),
+    [5] = ACTION_USAGE_CONSUMER(0x196),
+    [6] = ACTION_USAGE_CONSUMER(0x1A6),
+    [7] = ACTION_USAGE_CONSUMER(0x1A0),
+
+};
+
+/* custom action function */
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  /*
+  (void)opt;
+  switch(id) {
+    case ACTION_LEDS_ALL:
+        if(record->event.pressed) {
+          // signal the LED controller thread
+          chMBPost(&led_mailbox, LED_MSG_GAME_TOGGLE, TIME_IMMEDIATE);
+        }
+      break;
+    case ACTION_LEDS_GAME:
+      if(record->event.pressed) {
+        // signal the LED controller thread
+        chMBPost(&led_mailbox, LED_MSG_ALL_TOGGLE, TIME_IMMEDIATE);
+      }
+      break;
+  }
+  */
+}

keyboards/whitefox/led.c

@@ -0,0 +1,24 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+
+#include "led.h"
+
+
+void led_set(uint8_t usb_led) {
+}

keyboards/whitefox/matrix.c

@@ -0,0 +1,132 @@
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "hal.h"
+#include "timer.h"
+#include "wait.h"
+#include "print.h"
+#include "matrix.h"
+
+
+/*
+ * Matt3o's WhiteFox
+ * Column pins are input with internal pull-down. Row pins are output and strobe with high.
+ * Key is high or 1 when it turns on.
+ *
+ *     col: { PTD0, PTD1, PTD4, PTD5, PTD6, PTD7, PTC1, PTC2 }
+ *     row: { PTB2, PTB3, PTB18, PTB19, PTC0, PTC8, PTC9, PTC10, PTC11 }
+ */
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+static bool debouncing = false;
+static uint16_t debouncing_time = 0;
+
+
+void matrix_init(void)
+{
+//debug_matrix = true;
+    /* Column(sense) */
+    palSetPadMode(GPIOD, 0,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 1,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 4,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 5,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 6,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOD, 7,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOC, 1,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOC, 2,  PAL_MODE_INPUT_PULLDOWN);
+
+    /* Row(strobe) */
+    palSetPadMode(GPIOB, 2,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 3,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 18, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 19, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 0,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 8,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 9,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 10, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 11, PAL_MODE_OUTPUT_PUSHPULL);
+
+    memset(matrix, 0, MATRIX_ROWS);
+    memset(matrix_debouncing, 0, MATRIX_ROWS);
+}
+
+uint8_t matrix_scan(void)
+{
+    for (int row = 0; row < MATRIX_ROWS; row++) {
+        matrix_row_t data = 0;
+
+        // strobe row
+        switch (row) {
+            case 0: palSetPad(GPIOB, 2);    break;
+            case 1: palSetPad(GPIOB, 3);    break;
+            case 2: palSetPad(GPIOB, 18);   break;
+            case 3: palSetPad(GPIOB, 19);   break;
+            case 4: palSetPad(GPIOC, 0);    break;
+            case 5: palSetPad(GPIOC, 8);    break;
+            case 6: palSetPad(GPIOC, 9);    break;
+            case 7: palSetPad(GPIOC, 10);   break;
+            case 8: palSetPad(GPIOC, 11);   break;
+        }
+
+        wait_us(20); // need wait to settle pin state
+
+        // read col data: { PTD0, PTD1, PTD4, PTD5, PTD6, PTD7, PTC1, PTC2 }
+        data = ((palReadPort(GPIOC) & 0x06UL) << 5) |
+               ((palReadPort(GPIOD) & 0xF0UL) >> 2) |
+                (palReadPort(GPIOD) & 0x03UL);
+
+        // un-strobe row
+        switch (row) {
+            case 0: palClearPad(GPIOB, 2);  break;
+            case 1: palClearPad(GPIOB, 3);  break;
+            case 2: palClearPad(GPIOB, 18); break;
+            case 3: palClearPad(GPIOB, 19); break;
+            case 4: palClearPad(GPIOC, 0);  break;
+            case 5: palClearPad(GPIOC, 8);  break;
+            case 6: palClearPad(GPIOC, 9);  break;
+            case 7: palClearPad(GPIOC, 10); break;
+            case 8: palClearPad(GPIOC, 11); break;
+        }
+
+        if (matrix_debouncing[row] != data) {
+            matrix_debouncing[row] = data;
+            debouncing = true;
+            debouncing_time = timer_read();
+        }
+    }
+
+    if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
+        for (int row = 0; row < MATRIX_ROWS; row++) {
+            matrix[row] = matrix_debouncing[row];
+        }
+        debouncing = false;
+    }
+    return 1;
+}
+
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    xprintf("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        xprintf("%X0: ", row);
+        matrix_row_t data = matrix_get_row(row);
+        for (int col = 0; col < MATRIX_COLS; col++) {
+            if (data & (1<<col))
+                xprintf("1");
+            else
+                xprintf("0");
+        }
+        xprintf("\n");
+    }
+}

keyboards/whitefox/mcuconf.h

@@ -0,0 +1,54 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+#define KINETIS_NO_INIT             FALSE
+
+/* PEE mode - 48MHz system clock driven by external crystal. */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE
+#define KINETIS_PLLCLK_FREQUENCY    72000000UL
+#define KINETIS_SYSCLK_FREQUENCY    72000000UL
+#define KINETIS_BUSCLK_FREQUENCY    36000000UL
+#define KINETIS_FLASHCLK_FREQUENCY  24000000UL
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0            TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0                TRUE
+#define KINETIS_USB_USB0_IRQ_PRIORITY       5
+
+/*
+ * I2C driver settings
+ */
+#define KINETIS_I2C_USE_I2C0                TRUE
+#define KINETIS_I2C_I2C0_PRIORITY           4
+
+#endif /* _MCUCONF_H_ */

keyboards/whitefox/readme.md

@@ -0,0 +1,7 @@
+WhiteFox keyboard firmware
+======================
+
+This is an experimental port which came from the original TMK WhiteFox repo.
+
+The LED controller was not ported, as the original was a dirty hack and it would
+be good to have complete support.

keyboards/whitefox/rules.mk

@@ -0,0 +1,68 @@
+# project specific files
+SRC =	matrix.c \
+	led.c
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+# - For Infinity KB, SERIES = K20x
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+#   - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
+#   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
+MCU_LDSCRIPT = MK20DX256BLDR8
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0 and Infinity KB
+#   - k20x7 for Teensy 3.1 and 3.2
+MCU_STARTUP = k20x7
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+#   - MCHCK_K20 for Infinity KB
+BOARD = PJRC_TEENSY_3_1
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
+OPT_DEFS = 
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control
+#CONSOLE_ENABLE ?= yes	# Console for debug
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes	    # USB Nkey Rollover
+CUSTOM_MATRIX ?= yes # Custom matrix file

keyboards/whitefox/whitefox.c

@@ -0,0 +1,17 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "whitefox.h"

keyboards/whitefox/whitefox.h

@@ -0,0 +1,54 @@
+/*
+Copyright 2014 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef WHITEFOX_H
+#define WHITEFOX_H
+
+#include "quantum.h"
+
+/* WhiteFox
+ * ,---------------------------------------------------------------.
+ * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|Ins|
+ * |---------------------------------------------------------------|
+ * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Backs|Del|
+ * |---------------------------------------------------------------|
+ * |CapsL |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter   |PgU|
+ * |---------------------------------------------------------------|
+ * |Shif|   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Up |PgD|
+ * |---------------------------------------------------------------|
+ * |Ctrl|Gui |Alt |         Space    |App |Alt |Gui |  |Lef|Dow|Rig|
+ * `---------------------------------------------------------------'
+ */
+
+#define KEYMAP( \
+    K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K51, K61, \
+    K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, K13, K23,      K33, \
+    K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, K54, K64, K74, K84,      K05, \
+    K15, K25, K35, K45, K55, K65, K75, K85, K06, K16, K26, K36, K46,      K56, K66, \
+    K76, K86, K07,                K17,           K27, K37, K47,      K57, K67, K77  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07   }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17   }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27   }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37   }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47   }, \
+    { K50, K51, K52, K53, K54, K55, K56, K57   }, \
+    { K60, K61, K62, K63, K64, K65, K66, K67   }, \
+    { K70, K71, K72, K73, K74, K75, K76, K77   }, \
+    { K80, K81, K82, K83, K84, K85, K86, KC_NO }  \
+}
+
+#endif

quantum/quantum_keycodes.h

@@ -159,6 +159,8 @@ enum quantum_keycodes {
 #define MEH(kc)  (kc | QK_LCTL | QK_LSFT | QK_LALT)
 #define LCAG(kc) (kc | QK_LCTL | QK_LALT | QK_LGUI)
 #define ALTG(kc) (kc | QK_RCTL | QK_RALT)
+#define SCMD(kc) (kc | QK_LGUI | QK_LSFT)
+#define SWIN(kc) SCMD(kc)
 
 #define MOD_HYPR 0xf
 #define MOD_MEH 0x7
@@ -293,6 +295,8 @@ enum quantum_keycodes {
 #define MEH_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT), kc) // Meh is a less hyper version of the Hyper key -- doesn't include Win or Cmd, so just alt+shift+ctrl
 #define LCAG_T(kc) MT((MOD_LCTL | MOD_LALT | MOD_LGUI), kc) // Left control alt and gui
 #define ALL_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT | MOD_LGUI), kc) // see http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/
+#define SCMD_T(kc) MT((MOD_LGUI | MOD_LSFT), kc)
+#define SWIN_T(kc) SCMD_T(kc)
 
 // Dedicated keycode versions for Hyper and Meh, if you want to use them as standalone keys rather than mod-tap
 #define KC_HYPR HYPR(KC_NO)

readme.md

@@ -31,7 +31,7 @@ The OLKB product firmwares are maintained by [Jack Humbert](https://github.com/j
 
 This is not a tiny project. While this is the main readme, there are many other files you might want to consult. Here are some points of interest:
 
-* [**The Wiki**](https://github.com/jackhumbert/qmk_firmware/wiki) - the entirity of the readme has been moved here
+* [**The Wiki**](https://github.com/jackhumbert/qmk_firmware/wiki) - the entirety of the readme has been moved here
 * The readme for your own keyboard: This is found under `keyboards/<your keyboards's name>/`. So for the ErgoDox EZ, it's [here](keyboards/ergodox/ez/); for the Planck, it's [here](keyboards/planck/) and so on.
 * The list of possible keycodes you can use in your keymap is actually spread out in a few different places:
   * [doc/keycode.txt](doc/keycode.txt) - an explanation of those same keycodes.