qmk_firmware/keyboards/viterbi/rev1/rev1.h

#ifndef REV1_H
#define REV1_H

#include "../viterbi.h"

//void promicro_bootloader_jmp(bool program);
#include "quantum.h"


#ifdef USE_I2C
#include <stddef.h>
#ifdef __AVR__
	#include <avr/io.h>
	#include <avr/interrupt.h>
#endif
#endif

//void promicro_bootloader_jmp(bool program);

#ifndef FLIP_HALF
// Standard Keymap
// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
#define LAYOUT( \
    L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
    L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
    L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
    L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
    L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46 \
	) \
	{ \
		{ L00, L01, L02, L03, L04, L05, L06 }, \
		{ L10, L11, L12, L13, L14, L15, L16 }, \
		{ L20, L21, L22, L23, L24, L25, L26 }, \
		{ L30, L31, L32, L33, L34, L35, L36 }, \
		{ L40, L41, L42, L43, L44, L45, L46 }, \
		{ R06, R05, R04, R03, R02, R01, R00 }, \
		{ R16, R15, R14, R13, R12, R11, R10 }, \
		{ R26, R25, R24, R23, R22, R21, R20 }, \
		{ R36, R35, R34, R33, R32, R31, R30 }, \
		{ R46, R45, R44, R43, R42, R41, R40 } \
	}
#else
// Keymap with right side flipped
// (TRRS jack on both halves are to the right)
#define LAYOUT( \
    L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
    L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
    L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
    L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
    L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46 \
	) \
	{ \
		{ L00, L01, L02, L03, L04, L05, L06 }, \
		{ L10, L11, L12, L13, L14, L15, L16 }, \
		{ L20, L21, L22, L23, L24, L25, L26 }, \
		{ L30, L31, L32, L33, L34, L35, L36 }, \
		{ L40, L41, L42, L43, L44, L45, L46 }, \
		{ R00, R01, R02, R03, R04, R05, R06 }, \
		{ R10, R11, R12, R13, R14, R15, R16 }, \
		{ R20, R21, R22, R23, R24, R25, R26 }, \
		{ R30, R31, R32, R33, R34, R35, R36 }, \
		{ R40, R41, R42, R43, R44, R45, R46 } \
	}
#endif

#define LAYOUT_ortho_5x14 LAYOUT

#endif